Oliry Type-C Charging Cable for Bark Collars

1. Introduction

This manual provides essential information for the safe and effective use of your Oliry Type-C Charging Cable. This cable is specifically designed as a replacement charging solution for Oliry bark collars equipped with a USB-C charging port, including models like the S1 Pro.

Package Contents:

• 1 x Oliry Type-C Charging Cable

Note: The bark collar device is not included with this charging cable.

2. Setup

To begin charging your Oliry bark collar, follow these simple steps:

1. Identify the USB-C Port: Locate the USB-C charging port on your Oliry bark collar. Ensure your collar model is compatible with a Type-C connector.
2. Connect to Power Source: Insert the standard USB-A end of the charging cable into a compatible USB power adapter (not included), a computer's USB port, or a power bank.
3. Connect to Collar: Carefully insert the Type-C end of the charging cable into the USB-C port on your Oliry bark collar. Ensure a secure connection.

Image: The Oliry Type-C charging cable, showing its USB-A and Type-C connectors, ready for connection to a power source and a compatible bark collar.

3. Operating Instructions (Charging)

Once connected, your Oliry bark collar will begin charging. Observe any indicator lights on your collar for charging status (refer to your collar's specific manual for light indications).

• Fast Charging: The cable supports fast charging, allowing a full charge for your bark collar in approximately 2 hours.
• Battery Life: A fully charged collar can operate for up to 18 days. Actual usage time may vary depending on the collar's settings, frequency of use, and environmental factors.
• Consistent Performance: For optimal performance and to ensure your collar is always ready, it is recommended to plug in the charging cable after each training session or as needed.

4. Maintenance

Proper care and maintenance will extend the lifespan of your charging cable.

• Cleaning: Use a soft, dry cloth to gently wipe the cable and connectors. Avoid using liquid cleaners or abrasive materials.
• Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid bending or kinking the cable sharply.
• Handling: Always grasp the connector ends when plugging or unplugging the cable. Do not pull on the cable itself.

5. Troubleshooting

If you encounter issues with your charging cable, consider the following:

• Collar Not Charging:
  • Ensure both ends of the cable are securely connected to the power source and the bark collar.
  • Verify that the power adapter or USB port you are using is functional. Try a different power source.
  • Confirm that your Oliry bark collar indeed has a USB-C charging port. This cable is not compatible with other port types.
• Slow Charging:
  • Ensure the power adapter provides sufficient output (e.g., 5V/1A or higher). Lower output adapters may result in slower charging.
  • Avoid charging in extremely cold environments, as this can affect charging efficiency.
• Cable Damage: Inspect the cable for any visible signs of damage, such as frayed wires or bent connectors. Discontinue use if damage is found.

6. Specifications

7. Warranty Information

Specific warranty details for this Oliry Type-C Charging Cable are not provided in the product information. Please refer to the retailer's return policy, which may include a 30-day return period. For detailed warranty terms, it is recommended to contact the manufacturer directly.

8. Support

If you require further assistance or have questions not covered in this manual, please contact the seller or the manufacturer, Shenzhen Smartpet Technology Co.,Ltd., for support.