Relaxdays 10052065

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Relaxdays Dog House Instruction Manual

Model: 10052065

1. Introduction

Thank you for choosing the Relaxdays Dog House, Model 10052065. This waterproof wooden dog house features a tiltable asphalt roof, providing a comfortable and secure outdoor shelter for your small to medium-sized dog. This manual provides essential information for the safe assembly, operation, and maintenance of your new dog house.

1.1 Safety Information

  • Read all instructions carefully before assembly and use.
  • Ensure all parts are present and undamaged before beginning assembly.
  • Keep small parts away from children and pets during assembly to prevent choking hazards.
  • Place the dog house on a level, stable surface to prevent tipping.
  • Regularly inspect the dog house for any signs of wear or damage and repair as necessary.
  • This product is designed for pets only. Do not allow children to play inside or on the dog house.

1.2 Package Contents

Your Relaxdays Dog House package includes:

  • All necessary wooden panels (walls, floor, roof sections)
  • Asphalt roofing material (pre-attached to roof sections)
  • PE curtain for the entrance
  • Assembly hardware (screws, bolts, etc.)
  • Instruction manual
Relaxdays Dog House in a garden with a dog

Image 1.1: The Relaxdays Dog House situated in a garden setting, demonstrating its outdoor use and aesthetic appeal. A small dog is visible near the entrance.

2. Setup and Assembly

The Relaxdays Dog House is delivered in separate parts and requires assembly. Follow these steps carefully:

  1. Unpack and Identify Parts: Carefully unpack all components and lay them out. Refer to the included parts list to ensure all pieces are present.
  2. Assemble the Base: Connect the floor panel to the side panels using the provided screws. Ensure the base is stable and square.
  3. Attach the Walls: Securely attach the remaining wall panels to the base and to each other, forming the main structure of the dog house. Pay attention to the orientation of the entrance panel.
  4. Install the Roof: Position the two roof sections onto the top of the walls. The roof is designed to be tiltable, so ensure the hinges are correctly aligned and secured. The asphalt covering should face upwards for weather protection.
  5. Attach the PE Curtain: Install the PE curtain over the entrance opening. This curtain provides additional protection against wind and light rain.
  6. Final Inspection: Once assembled, check all screws and connections to ensure they are tight and secure. The dog house should be sturdy and free of wobbles.
Close-up of the dog house roof and floor details

Image 2.1: Detailed view of the dog house's construction, highlighting the asphalt roof material and the raised floor design for protection against ground moisture.

3. Operating Instructions

The Relaxdays Dog House is designed for outdoor use, providing a safe and comfortable shelter for your pet.

  • Placement: Position the dog house in a sheltered area of your garden or terrace, ideally with the entrance facing away from prevailing winds and rain.
  • Tiltable Roof: The roof can be easily tilted open. This feature allows for convenient access to your pet, simplifies feeding, and facilitates thorough cleaning and ventilation of the interior.
  • Weather Protection: The waterproof wooden construction and asphalt roof protect against rain and moisture. The PE curtain at the entrance offers additional protection from wind and light precipitation.
  • Suitable Pets: This dog house is suitable for small to medium-sized dogs weighing up to 15 kg and with a length of up to 60 cm, such as pugs or terriers.
Dog house on a wooden deck with a beagle playing nearby

Image 3.1: The dog house placed on a wooden deck, showing its versatility for various outdoor settings. A beagle is seen playing in front of the house.

4. Maintenance

Regular maintenance will extend the lifespan of your Relaxdays Dog House and ensure a hygienic environment for your pet.

  • Cleaning: Utilize the tiltable roof feature to easily access the interior for cleaning. Remove any bedding, sweep out debris, and wipe down surfaces with a pet-safe cleaner and water. Rinse thoroughly and allow to air dry completely before replacing bedding.
  • Wood Care: The dog house is made from weather-resistant fir wood. To maintain its condition and prolong its life, consider applying a pet-safe wood sealant or stain annually, especially if exposed to harsh weather conditions.
  • Roof Inspection: Periodically check the asphalt roof for any cracks, tears, or loose sections. Repair any damage promptly to maintain its waterproof integrity.
  • Hardware Check: Annually, inspect all screws and connections for tightness. Tighten any loose hardware to ensure the structural stability of the dog house.
  • PE Curtain: Clean the PE curtain with mild soap and water. Replace if it becomes torn or heavily soiled.
Close-up of the dog house roof edge and white frame

Image 4.1: A detailed view of the dog house's roof edge and the white trim, illustrating the construction quality and materials used for weather resistance.

5. Troubleshooting

If you encounter any issues with your Relaxdays Dog House, refer to the following common problems and solutions:

  • Issue: Water leakage inside the dog house.
    Solution: Check the asphalt roof for any damage or gaps. Ensure all roof sections are properly aligned and securely fastened. Verify that the dog house is placed on a level surface to prevent water pooling.
  • Issue: Dog house feels unstable or wobbly.
    Solution: Re-check all assembly screws and tighten any that are loose. Ensure the dog house is placed on a completely flat and stable ground.
  • Issue: Difficulty opening or closing the tiltable roof.
    Solution: Inspect the hinges for any obstructions or damage. Ensure they are clean and lubricated if necessary.
  • Issue: Wood appears discolored or weathered.
    Solution: This is normal for outdoor wood products over time. Apply a pet-safe wood sealant or stain to restore its appearance and provide additional protection.

6. Specifications

Brand Relaxdays
Model Number 10052065
Color Grey/White
Material Fir Wood, Bitumen Cardboard (Asphalt), Plastic (PE)
Overall Dimensions (H x W x D) Approx. 77 x 71 x 58 cm (30.3 x 28 x 22.8 inches)
Interior Dimensions (H x W x D) Approx. 66.5 x 44.5 x 71 cm (26.2 x 17.5 x 28 inches)
Entrance Dimensions (H x W) Approx. 40 x 30 cm (15.7 x 11.8 inches)
Weight Approx. 11.1 kg (24.5 lbs)
Suitable for Dogs Up To 15 kg (33 lbs) and 60 cm (23.6 inches) length
Diagram showing the dimensions of the dog house

Image 6.1: A diagram illustrating the key external dimensions of the dog house (height, width, depth) and indicating the maximum suitable dog length.

7. Warranty and Support

Specific warranty information for the Relaxdays Dog House, Model 10052065, is not provided in the product details. For any questions regarding warranty, missing parts, or assembly assistance, please contact the retailer or manufacturer directly.

Manufacturer: Relaxdays

Please retain your proof of purchase for any warranty claims or support inquiries.

© 2026 Relaxdays. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.