SEESII Cordless Stick Water Transfer Pump with Tripod Stand - Model XC-P025 Instruction Manual

1. Safety Information

Read all safety warnings and instructions carefully before operating this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Always wear appropriate personal protective equipment, such as safety glasses, when operating the pump.
• Ensure the pump is fully submerged in water before starting to prevent dry running, which can damage the motor.
• Do not pump flammable or corrosive liquids. This pump is designed for clean water, rainwater, and lightly contaminated water.
• Keep children and bystanders away from the operating area.
• Disconnect the battery before performing any maintenance or cleaning.
• Do not operate the pump if any part is damaged. Contact customer support for assistance.

2. Product Overview

The SEESII Cordless Stick Water Transfer Pump (Model XC-P025) is a versatile, battery-powered utility pump designed for efficient water transfer in various applications. Its integrated tripod stand allows for hands-free operation, making tasks such as draining pools, hot tubs, rain barrels, and flooded basements more convenient.

Key Features:

• Integrated Tripod Stand: Provides stable, hands-free operation, allowing you to position the discharge hose freely.
• High Flow Rate: Moves water at up to 720 gallons per hour (12 gallons per minute), enabling quick drainage.
• Dual 4.0Ah Batteries: Includes two 4.0Ah batteries, offering approximately 42 minutes of combined runtime (20 minutes per battery).
• 32-Foot Lift: Capable of pushing water up to 32 feet vertically, suitable for draining low-lying areas to higher discharge points.
• Low-Level Intake: Removes water down to 0.5 inches, minimizing residual puddles and cleanup.
• Fine-Mesh Intake Filter: Helps prevent small particles from entering the pump, suitable for clean to lightly contaminated water.
• Cordless Design: Offers portability and flexibility, eliminating the need for extension cords in wet environments.

3. Components List

The SEESII Cordless Stick Water Transfer Pump kit includes the following items:

• 1 x Cordless Stick Water Pump
• 1 x Tripod Stand
• 2 x 4000mAh Lithium-Ion Batteries
• 1 x Fast Charger
• 1 x 3.2 FT Garden Hose

4. Setup

4.1. Charging the Batteries

1. Connect the fast charger to a standard power outlet.
2. Insert a 4000mAh Lithium-Ion battery into the charger.
3. Allow the battery to charge fully. The charger indicator light will change to confirm a full charge.
4. Repeat for the second battery.

4.2. Assembling the Pump and Tripod

1. Attach the tripod stand to the base of the cordless stick water pump. Ensure it is securely fastened.
2. Extend the tripod legs and adjust them to a stable position on a flat surface. The tripod can handle up to a 15-degree tilt on uneven ground.
3. Insert a charged battery into the designated slot on the pump handle until it clicks into place.

4.3. Connecting the Hose

1. Connect the provided 3.2 FT garden hose to the pump's discharge outlet.
2. Ensure the hose connection is tight to prevent leaks.
3. Direct the other end of the hose to the desired drainage or watering location.

5. Operation

5.1. Starting the Pump

1. Place the pump into the water source, ensuring the intake filter is fully submerged.
2. Press the power switch located on the pump handle to turn on the pump.
3. The pump will begin transferring water through the connected hose.

5.2. Hands-Free Pumping with Tripod

The integrated tripod allows for stable, hands-free operation. Once the pump is positioned and stable, you can leave it to run while attending to other tasks, such as directing the discharge hose.

5.3. Draining Applications

• Pools and Hot Tubs: Submerge the pump in the pool or hot tub. The 720 GPH flow rate allows for quick drainage.
• Rain Barrels: Transfer water from rain barrels to gardens or other containers.
• Flooded Basements/Areas: Position the pump in the lowest point of the flooded area. The 32-foot lift capability helps move water to higher discharge points. The low-level intake can remove water down to 0.5 inches.
• Boats: Use the pump to remove standing water from boat hulls.

5.4. Stopping the Pump

Once the water transfer is complete or the water level is sufficiently low, press the power switch to turn off the pump. Remove the pump from the water source.

5.5. Instructional Videos

6. Maintenance

6.1. Cleaning the Intake Filter

Regularly inspect and clean the fine-mesh intake filter to ensure optimal pump performance and prevent clogging.

1. Disconnect the battery from the pump.
2. Remove the intake filter from the bottom of the pump.
3. Rinse the filter with clean water to remove any debris or particles.
4. Reattach the clean filter securely to the pump.

6.2. Battery Care

• Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
• Do not store batteries in a discharged state for extended periods. Charge them periodically if not in use.
• Use only the provided charger for charging the batteries.

7. Troubleshooting

8. Specifications

9. Warranty and Support

This SEESII product comes with a 1 Year Manufacturer Warranty.

For technical support, warranty claims, or any questions regarding your product, please contact SEESII customer service through the retailer where the product was purchased or visit the official SEESII website for contact information.