HOMCOM Nightstand Set Instruction Manual

1. Introduction

Thank you for choosing the HOMCOM Set of 2 Nightstands. These nightstands are designed to enhance your bedroom or living room with their functional storage and stylish boho aesthetic. Featuring a woven resin door, an adjustable shelf, and solid wood legs, they offer both practicality and a modern design element. Please read this manual carefully before assembly and use to ensure proper installation and safe operation.

2. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all parts are present and undamaged before beginning assembly.
• Do not overtighten screws, as this may damage the material.
• Keep small parts away from children during assembly.
• Do not stand or sit on the nightstand.
• Distribute weight evenly on shelves and the top surface. The maximum recommended load is 40 kg total, 15 kg for the top/bottom shelf, and 10 kg for the adjustable shelf.
• Regularly check all fasteners to ensure they remain tight.
• Use the product on a level surface to prevent tipping.

3. Package Contents

Verify that all components listed below are included in your package:

• 2 x HOMCOM Nightstands
• 1 x Assembly Manual
• All necessary hardware for assembly (screws, dowels, etc.)

Image: The complete set of two HOMCOM nightstands, showcasing their design and intended use as bedside tables.

4. Assembly and Setup

Assembly is required for this product. Please follow the detailed instructions provided in the included Assembly Manual. The general steps involve:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches.
2. Identify Parts: Refer to the parts list in the Assembly Manual to identify each component.
3. Assemble Cabinet Body: Follow the diagrams to connect the side panels, top, and bottom panels to form the main cabinet structure.
4. Install Door: Attach the door with the woven resin panel using the provided hinges. Ensure the door opens and closes smoothly.
5. Attach Legs: Securely fasten the solid wood legs to the base of the cabinet.
6. Insert Adjustable Shelf: Place the adjustable shelf inside the cabinet. The shelf can be positioned at three different heights to accommodate various item sizes.

Image: An illustration demonstrating the three adjustable height positions for the internal shelf, allowing for flexible storage configurations.

Image: A close-up view of the nightstand's solid wood legs, highlighting the anti-slip pads designed to protect flooring and ensure stability.

5. Usage and Operation

These HOMCOM nightstands are designed for versatile use in various rooms:

• Bedside Table: Place next to your bed to keep essential items like lamps, books, and personal devices within easy reach. The enclosed cabinet provides discreet storage.
• Side Table: Use in a living room or lounge area as an accent table. It can hold decorative items, beverages, or serve as additional storage.
• Storage: Utilize the two-tier cabinet for organized storage. The adjustable shelf allows you to customize the internal space for items of different heights.

Image: The nightstand with its door open, revealing the interior storage space and the adjustable shelf holding various items, demonstrating its practical storage capabilities.

Image: Two HOMCOM nightstands positioned on either side of a bed, illustrating their intended use as bedside furniture in a bedroom environment.

6. Maintenance

To maintain the appearance and longevity of your HOMCOM nightstands:

• Cleaning: Wipe with a dry cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Spills: Immediately wipe up any spills to prevent staining or water damage.
• Fasteners: Periodically check and tighten all screws and connections to ensure stability.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.

7. Troubleshooting

If you encounter any issues with your nightstands, consider the following common solutions:

• Wobbly Table: Ensure the nightstand is placed on a level surface. Check that all legs are securely attached and all screws are tightened. The anti-slip pads on the feet should help stabilize it.
• Door Not Closing Properly: Check the hinges for proper alignment and tightness. Adjust if necessary. Ensure no items inside the cabinet are obstructing the door.
• Scratches/Damage: For minor scratches, furniture repair pens or touch-up paint matching the "Light Green" color may be used. For significant damage, contact customer support.
• Missing Parts: If any parts were missing upon delivery, refer to the contact information in the Warranty and Support section.

8. Specifications

Image: A detailed diagram illustrating the key dimensions of the nightstand, including height, width, depth, and leg height, along with the maximum weight capacity.

9. Warranty and Support

HOMCOM products are manufactured with quality and care. For warranty information, missing parts, or technical support, please refer to the contact details provided with your purchase documentation or visit the official HOMCOM website. Please have your model number (FR83D-016V01GN0531) and purchase date ready when contacting support.

For more information about HOMCOM products, you can visit the HOMCOM Brand Store.