1. Introduction
Thank you for choosing the MAHANCRIS Industrial Printer Cart and Fish Tank Stand Bundle. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before assembly and retain them for future reference.
2. Safety Information
- Read All Instructions: Ensure you understand all assembly steps and safety warnings before proceeding.
- Weight Limits: Do not exceed the specified weight capacities for each shelf and the top surface. Overloading can cause structural failure and injury.
- Level Surface: Always place the assembled units on a flat, level, and stable surface to prevent tipping.
- Electrical Safety: The printer cart and fish tank stand include integrated power outlets. Ensure all connected devices are within the specified electrical ratings. Do not open or attempt to repair the power strip. Use indoors only.
- Children and Pets: Keep small parts away from children and pets during assembly. Ensure the furniture is stable and secure to prevent accidental tipping.
- Aquarium Specifics: For the fish tank stand, ensure the aquarium is properly seated and balanced. Water is heavy; always consider the combined weight of the tank, water, gravel, and decorations.
3. Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
3.1 Printer Cart (PTHB40E01)
- Printer Stand Components (Engineered Wood Panels, Metal Frame)
- Accessory Kit (Screws, bolts, casters, power strip unit)
- Assembly Instructions
3.2 Fish Tank Stand (FTBK60E01)
- Fish Tank Stand Components (Engineered Wood Panels, Metal Frame)
- Accessory Kit (Screws, bolts, power strip unit)
- Assembly Instructions
4. Specifications
4.1 MAHANCRIS Industrial Printer Cart (PTHB40E01)
- Color: Black
- Material: Engineered Wood, Metal
- Product Size: 16.5"L x 11"W x 23.6"H (41.9 cm L x 27.9 cm W x 59.9 cm H)
- Shelf Load Capacity: 44 lb (20 kg) per shelf
- Power Outlets: 2 AC Outlets (120V/12A), 2 USB Ports (5V/2A)
- Power Cord Length: 4.9 feet (150 cm)
Image: Detailed dimensions and weight capacity for the MAHANCRIS Industrial Printer Cart. The cart measures 16.5 inches long, 11 inches wide, and 23.6 inches high. Each of its three shelves can support up to 44 pounds.
Image: Close-up of the power strip on the MAHANCRIS Industrial Printer Cart, showing 2 AC outlets (120V/12A), 2 USB ports (5V/2A), and a 4.9-foot power cord.
4.2 MAHANCRIS Fish Tank Stand (FTBK60E01)
- Color: Black
- Material: Engineered Wood, Metal
- Product Size: 36.2"L x 19.7"W x 31.7"H (92 cm L x 50 cm W x 80.5 cm H)
- Designed For: 40-50 Gallon Aquariums
- Top Load Capacity: 500 lb (226.8 kg)
- Shelf Load Capacity: 88 lb (40 kg)
- Features: Built-in power strip, multi-tier storage, suitable for 10-20 gallon reptile terrarium on bottom shelves.
Image: Detailed dimensions and weight capacity for the MAHANCRIS Fish Tank Stand. The stand measures 36.2 inches long, 19.7 inches wide, and 31.7 inches high. It is designed for 40-50 gallon tanks with a top load capacity of 500 pounds. Internal shelves can hold up to 88 pounds.
5. Setup and Assembly
Both the printer cart and fish tank stand require assembly. Please follow the detailed instructions provided in the accessory kit for each unit. General steps include:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Identify Parts: Refer to the parts list in your specific instruction manual to identify each component.
- Assemble Frame: Attach the metal frame components using the provided screws and tools. Do not overtighten screws initially.
- Install Shelves: Secure the engineered wood shelves to the frame.
- Attach Casters (Printer Cart Only): For the printer cart, attach the rolling casters to the bottom frame. Ensure they are securely fastened.
- Install Power Strip: Mount the power strip unit into its designated slot.
- Final Tightening: Once all components are in place, carefully tighten all screws to ensure stability.
- Placement: Position the assembled unit on a level surface.
Note: A screwdriver or other basic hand tools may be required for assembly.
Image: An assembled MAHANCRIS Industrial Printer Cart, showcasing its three tiers, power outlets, and mobile casters, used as a side table in a living room.
Image: An assembled MAHANCRIS Fish Tank Stand supporting a large aquarium, with additional storage shelves visible on the side.
6. Operating Instructions
6.1 Printer Cart Usage
- Placement: Position the printer cart next to your desk or in an accessible area. The casters allow for easy repositioning.
- Power Outlets: Plug the cart's power cord into a standard wall outlet. Use the 2 AC outlets for printers, laptops, or other electronics. The 2 USB ports can charge mobile phones, tablets, or other USB-powered devices.
- Storage: Utilize the three tiers for storing paper, ink cartridges, office supplies, or other items within the 44 lb per shelf weight limit.
6.2 Fish Tank Stand Usage
- Aquarium Placement: Carefully place your 40-50 gallon aquarium on the top surface of the stand. Ensure it is centered and stable. Do not exceed the 500 lb weight limit.
- Power Strip: Plug the stand's power cord into a standard wall outlet. Use the integrated power strip to connect aquarium equipment such as filters, heaters, and lights.
- Storage: The multi-tier design offers ample space for aquarium supplies, fish food, cleaning tools, or even a 10-20 gallon reptile terrarium on the lower shelves, adhering to the 88 lb shelf weight limit.
- Cable Management: Utilize the cable holes and design features to neatly route power cords and tubing, preventing tangles and ensuring a tidy setup.
Image: Close-up details of the MAHANCRIS furniture construction, highlighting the easy-to-clean quality board, stable steel tubes, a wire shelf for extra storage, and convenient cable holes for organization.
7. Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish. The quality board material is designed for easy cleaning.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Electrical Components: Ensure the power cords are not pinched or damaged. Keep the power outlets clean and free of dust.
- Spills: In case of water spills (especially for the fish tank stand), wipe them immediately to prevent water damage to the wood.
8. Troubleshooting
- Wobbly Stand: Ensure all screws are fully tightened. Check that the stand is on a completely level surface. Adjust if needed.
- Power Outlets Not Working: Verify that the main power cord is securely plugged into a functioning wall outlet. Check if the circuit breaker on the power strip (if present) has tripped. Test with another device to confirm the outlet is working.
- Missing Parts: If you find any parts missing during assembly, refer to the package contents list and contact MAHANCRIS customer support for assistance.
9. Warranty and Support
MAHANCRIS products are designed for quality and durability. For any questions, concerns, or warranty claims, please contact MAHANCRIS customer support through your purchase platform or the official MAHANCRIS website. Please have your model number (PTHB40E01-FTBK60E01) and purchase information ready when contacting support.
