OLEVS Men's Quartz Chronograph Watch (Model YPF-S-G2975-HP-H) Instruction Manual

Introduction

Thank you for choosing the OLEVS Men's Quartz Chronograph Watch, Model YPF-S-G2975-HP-H. This manual provides essential information for the proper setup, operation, and care of your new timepiece. Please read it thoroughly to ensure optimal performance and longevity of your watch.

This watch features a precise quartz movement, a multi-functional chronograph, a moon phase display, and a date function. It is designed with a durable stainless steel case, a high-hardness coated glass mirror, and a comfortable silicone strap. The watch also includes a luminous display for visibility in low-light conditions and is water-resistant up to 30 meters.

Image: OLEVS Men's Quartz Chronograph Watch, front view. This image displays the watch's overall design, including the square case, chronograph subdials, and silicone strap.

Setup

Before using your watch, please follow these steps to set the time, date, and chronograph.

1. Setting the Time

1. Pull the crown (B) out to the second click position.
2. Rotate the crown (B) to set the hour and minute hands to the correct time. Ensure the AM/PM is correctly set, especially when setting the date.
3. Push the crown (B) back to the normal position.

2. Setting the Date and Moon Phase

1. Pull the crown (B) out to the first click position.
2. Rotate the crown (B) to adjust the date and moon phase display. Continue rotating until the correct date and moon phase are shown.
3. Push the crown (B) back to the normal position.

Image: Diagram illustrating the functions of the side buttons on the OLEVS watch. This image shows the crown (B) for time/date/moon phase adjustment, button (A) for starting the timer, and button (C) for resetting the timer.

Operating the Chronograph

The chronograph function allows you to measure elapsed time.

1. Starting and Stopping the Chronograph

1. Press button (A) to start the chronograph. The chronograph second hand will begin to move.
2. Press button (A) again to stop the chronograph. The elapsed time will be displayed on the subdials.

2. Resetting the Chronograph

1. After stopping the chronograph, press button (C) to reset all chronograph hands to their zero positions.

3. Luminous Display

The watch features a luminous coating on the hands and markers for improved visibility in the dark. To activate the night light function, expose the watch to strong light for 30-40 seconds.

Image: Luminous display of the OLEVS watch. This image illustrates how the watch hands and markers glow in the dark after being exposed to light.

Maintenance

Proper care will help maintain the appearance and function of your OLEVS watch.

1. Cleaning

Wipe the watch case and strap regularly with a soft, dry cloth. For the silicone strap, a damp cloth with mild soap can be used, followed by thorough drying.

2. Water Resistance

This watch is water-resistant up to 30 meters (100 feet). This means it can withstand splashes, sweat, and accidental rain. It is not suitable for bathing, showering, swimming, diving, or any activities involving prolonged water immersion or high-pressure water. Ensure the crown is fully pushed in before any contact with water.

Image: OLEVS watch demonstrating 30M water resistance. This image shows water splashing on the watch face, indicating its resistance to light water exposure.

3. Battery Replacement

The watch is powered by a quartz battery. When the watch stops or the hands move erratically, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

Troubleshooting

If you encounter any issues with your watch, please refer to the following common solutions:

• Watch not running: Check if the crown is fully pushed in. If the watch still does not run, the battery may need replacement.
• Time/Date not changing: Ensure the crown is not pulled out. If the issue persists after correctly setting the time and date, consult a professional.
• Chronograph hands not resetting to zero: This may indicate a need for chronograph calibration. If the reset button (C) does not correct the issue, professional service may be required.
• Water condensation inside the crystal: This indicates a breach in the watch's water resistance. Avoid further contact with water and seek immediate professional service to prevent damage to the movement.

Specifications

Image: Key product specifications for the OLEVS watch. This image visually presents the watch's dimensions and weight.

Warranty Information

This OLEVS watch comes with a seller warranty. For specific details regarding the warranty period, coverage, and claims process, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty-related inquiries.

Customer Support

If you have any questions, require assistance with setup or operation, or encounter issues not covered in this manual, please contact the seller or OLEVS customer support. Refer to your purchase platform or the OLEVS official website for contact information.

Product Video