NiPoGi Hyper H2 Mini PC Intel Core i7-13620H User Manual

1. Introduction

This user manual provides comprehensive instructions for the NiPoGi Hyper H2 Mini PC, equipped with an Intel Core i7-13620H processor. It covers essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the product.

2. Safety Information

Please observe the following safety guidelines to prevent damage to the device or injury to yourself:

• Initial Setup: To avoid initial configuration issues, do not connect to the internet (wired or Wi-Fi) until the operating system is fully loaded and operational. If prompted for an email during setup, skip this step.
• If using a wired network, disconnect the cable and restart the device, ensuring it remains disconnected from the network during initial setup.
• If a Wi-Fi connection was established and Windows cannot be loaded, power off your router temporarily.
• Ensure the device is placed on a stable, flat surface with adequate ventilation.
• Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
• Do not open the casing or attempt to repair the device yourself. Refer to qualified service personnel.
• Use only the provided power adapter.

3. What's in the Box

Upon unpacking your NiPoGi Hyper H2 Mini PC, verify that all the following items are included:

• 1 x NiPoGi Mini PC
• 1 x EU Power Adapter
• 1 x HDMI Cable
• 1 x VESA Mount
• 1 x User Manual

4. Product Overview

The NiPoGi Hyper H2 Mini PC is a compact yet powerful computing solution. Below are key features and port layouts.

4.1 Key Features

• Processor: Intel Core i7-13620H (10 Cores/16 Threads, up to 4.90 GHz, 24MB Smart Cache, 54W TDP)
• Memory: 32GB DDR4 (2x16GB) dual-channel, expandable up to 64GB
• Storage: 1TB M.2 NVMe PCIe 4.0x4 SSD, with two M.2 2280 slots (one NVMe/SATA, one NVMe) supporting up to 4TB total
• Graphics: Integrated Intel UHD Graphics for 13th Gen Intel Processors (1.5 GHz, 64 Execution Units)
• Display Output: Triple display support (4K@120Hz) via HDMI 2.0, DisplayPort 1.4, and USB4.0 Type-C
• Wireless Connectivity: Wi-Fi 6 (802.11ax, 2.4G+5G) and Bluetooth 5.2
• Operating System: Pre-installed Windows 11 Pro

4.2 Port Layout

The Mini PC features a variety of ports for connectivity:

• Front Ports:
  • 1 x USB4.0 Type-C (full-featured: data, display, 15W PD charging)
  • 2 x USB 3.2 Gen 2 Type-A
  • 1 x 3.5mm Audio Jack
  • 1 x Power Button
• Rear Ports:
  • 1 x HDMI 2.0
  • 1 x DisplayPort 1.4
  • 1 x DC Power Input
  • 1 x RJ45 Gigabit Ethernet (2.5G)
  • 4 x USB 3.2 Gen 1 Type-A

5. Setup Guide

Follow these steps to set up your NiPoGi Hyper H2 Mini PC:

1. Connect to a Display: Connect your monitor(s) to the Mini PC using the HDMI, DisplayPort, or USB4.0 Type-C ports. Use the provided HDMI cable or a compatible cable for other ports.
2. Connect Peripherals: Plug in your keyboard, mouse, and any other USB devices into the available USB ports.
3. Connect Power: Connect the EU Power Adapter to the DC power input port on the Mini PC, then plug the adapter into a power outlet.
4. Power On: Press the power button located on the front of the Mini PC. The system will boot up.
5. Initial Windows Setup: Follow the on-screen instructions to complete the Windows 11 Pro setup. As per safety information, avoid connecting to the internet until the OS is fully operational to prevent potential configuration issues.
6. Connect to Network: Once Windows is fully set up, you can connect to the internet via Wi-Fi 6 or by plugging an Ethernet cable into the RJ45 port.

6. Operating Instructions

Your NiPoGi Hyper H2 Mini PC comes with Windows 11 Pro pre-installed, offering a familiar user experience.

• Power On/Off: Press the power button to turn the PC on. To turn off, use the Windows Shut Down option or press and hold the power button for a few seconds for a forced shutdown (not recommended for regular use).
• Connecting to Wi-Fi: In Windows, click the Wi-Fi icon in the taskbar, select your network, enter the password, and connect.
• Connecting Bluetooth Devices: Go to Windows Settings > Bluetooth & devices, turn on Bluetooth, and pair your devices.
• Expanding Storage: The Mini PC supports M.2 2280 NVMe SSDs. To expand storage, open the bottom cover (usually secured by a single screw) and install an additional M.2 SSD into the available slot. Refer to the diagram below for internal layout.

• Automatic Power On: The device supports Auto Power On, Wake On LAN, and RTC Wake features. These can typically be configured in the BIOS settings.

7. Maintenance

Regular maintenance helps ensure the longevity and performance of your Mini PC.

• Cleaning: Use a soft, dry cloth to clean the exterior of the device. For dust accumulation in vents, use compressed air. Ensure the device is powered off and unplugged before cleaning.
• Software Updates: Regularly update Windows and drivers to ensure system stability and security.
• Ventilation: Ensure the Mini PC has adequate airflow around it. Do not block the ventilation openings.
• Storage Management: Periodically clean up unnecessary files and applications to maintain optimal storage performance.

8. Troubleshooting

If you encounter issues with your Mini PC, refer to the following common problems and solutions:

• No Display:
  • Ensure the monitor is powered on and correctly connected to the Mini PC.
  • Try a different display cable or monitor.
  • Verify the correct input source is selected on your monitor.
• No Power:
  • Check if the power adapter is securely connected to both the Mini PC and the power outlet.
  • Ensure the power outlet is functional.
• Wi-Fi/Bluetooth Connectivity Issues:
  • Ensure Wi-Fi/Bluetooth is enabled in Windows settings.
  • Restart your router/modem.
  • Update wireless drivers.
• Slow Performance:
  • Close unnecessary applications.
  • Check for background processes consuming high CPU or RAM.
  • Ensure sufficient free space on the SSD.
  • Run a disk cleanup and defragmentation (for HDD, not typically needed for SSD).
• Initial Windows Setup Issues (as per Safety Information):
  • If Windows setup hangs or encounters errors, ensure the device is not connected to the internet (wired or Wi-Fi) during the initial setup phase. Disconnect any network cables or disable Wi-Fi on your router temporarily if needed.

9. Specifications

Detailed technical specifications for the NiPoGi Hyper H2 Mini PC:

10. Warranty and Support

NiPoGi is committed to providing high-quality products and customer service.

• Warranty: The product includes a one-year free replacement warranty.
• Technical Support: Lifetime technical support is provided. For assistance, please contact NiPoGi customer service.
• Certifications: The product meets CE and UKCA safety certifications.

For further assistance, please refer to the official NiPoGi website or contact their customer support channels.