VGR 308 Professional Foil Shaver Instruction Manual

1. Introduction

Welcome to the VGR 308 Professional Double Foil Shaver instruction manual. This guide provides essential information for the safe and effective use, maintenance, and care of your new electric shaver. Please read it thoroughly before first use and keep it for future reference.

2. Key Features

• 3-Speed High-Performance Motor (7000–9000RPM): Adjustable speeds for various beard types, from fine facial hair to thick stubble.
• Ultra-Close & Skin-Friendly Shave: Equipped with double titanium-coated hypoallergenic foils and sharp inner cutters for an irritation-free shave on the face, neck, and head.
• Cordless & Corded Use with Long Battery Life: Powered by a 1200mAh lithium battery, offering up to 150 minutes of runtime on a full 2-hour charge. Convenient USB charging allows for cordless freedom or corded operation.
• Smart LED Display & Durable Metal Body: The bright LED display clearly shows speed levels and remaining battery power. The solid metal housing ensures durability and provides a premium, anti-slip grip.
• Complete Grooming Kit: Includes 1 protection cap, 1 cleaning brush, 1 USB charging cable, and 1 travel pouch for convenient storage and portability.

3. Package Contents

Your VGR 308 Electric Shaver package includes:

• 1 x VGR 308 Electric Shaver
• 1 x Protection Cap
• 1 x Cleaning Brush
• 1 x USB Charging Cable
• 1 x Travel Pouch

Image: The VGR 308 Electric Shaver with its included accessories: a protection cap, cleaning brush, USB charging cable, and travel pouch.

4. Setup

4.1 Initial Charge

1. Before first use, fully charge the shaver for approximately 2 hours.
2. Connect the USB charging cable to the shaver's charging port and a compatible USB power source (e.g., computer, wall adapter).
3. The LED display will indicate the charging status and remaining battery percentage.
4. Do not use the shaver while it is charging.

Image: The VGR 308 shaver connected to a USB-C charging cable, displaying charging information on its LED screen.

5. Operating Instructions

5.1 Powering On/Off

• Press the power button (center button) to turn the shaver on or off.
• The LED display will show the current RPM and remaining battery percentage.

5.2 Adjusting Speed

• The shaver features three adjustable speeds: 7000 RPM, 8000 RPM, and 9000 RPM.
• Use the '+' and '-' buttons to cycle through the speed settings.
• 7000 RPM: Suitable for daily shaving or fine hair.
• 8000 RPM: Recommended for stubble or hair not shaved for 2-3 days.
• 9000 RPM: Ideal for coarse, thick beards or faster shaving.

Image: Visual guide illustrating the three speed settings (7000, 8000, 9000 RPM) and their suggested applications for different beard lengths and types.

5.3 Shaving Technique

• For best results, ensure your skin is clean and dry.
• Hold the shaver at a right angle to your skin.
• Gently stretch your skin with your free hand to make the hairs stand upright.
• Move the shaver in short, circular motions or straight strokes against the direction of hair growth.
• Avoid pressing too hard, as this can cause irritation.

Image: A man demonstrating the use of the VGR 308 electric shaver on his face, highlighting its close shaving capability.

6. Maintenance

6.1 Cleaning the Shaver Head

1. Ensure the shaver is turned off and disconnected from any power source.
2. Press the release button on the side of the shaver to detach the foil head.
3. Use the included cleaning brush to remove any trapped hair from the foils and the inner cutters.
4. The foil head can be rinsed under running water. Ensure it is completely dry before reattaching.
5. Do not immerse the entire shaver body in water.
6. Reattach the foil head by aligning it and pressing until it clicks into place.

Image: A step-by-step visual guide on how to clean the VGR 308 shaver, including detaching the head, brushing out hair, and rinsing under water.

6.2 Replacing Foils and Cutters

Over time, the foils and cutters may wear down, affecting shaving performance. Replacement parts may be available from authorized VGR retailers or the manufacturer's website. Follow these steps to replace them:

1. Turn off the shaver and detach the foil head as described in section 6.1.
2. Carefully remove the old foils and cutters.
3. Insert the new cutters onto the oscillating posts.
4. Place the new foils securely over the cutters.
5. Reattach the foil head to the shaver body.

7. Troubleshooting

8. Specifications

• Model: V-308
• Motor Speed: 7000-9000 RPM (3-speed adjustable)
• Battery: 1200mAh Lithium Battery
• Charging Time: Approximately 2 hours
• Operating Time: Up to 150 minutes
• Charging Interface: USB Type-C
• Foils: Double Black Titanium Foils
• Body Material: Metal
• Package Dimensions: 7.68 x 5.2 x 3.03 inches; 1.34 Pounds

9. Safety Information

• Do not use the shaver while it is charging.
• Keep the charging port dry to prevent electrical hazards.
• Exercise caution when using the shaver with water or shaving cream.
• Always hold the shaver gently against the skin to avoid nicks or cuts.
• Keep out of reach of children.
• Do not disassemble or attempt to repair the shaver yourself. Contact customer support for assistance.

10. Warranty and Support

VGR products are designed for durability and performance. For any issues or inquiries, please refer to the following:

• Warranty: This product typically comes with a 1-year warranty. Please retain your proof of purchase for warranty claims.
• Customer Support: For technical assistance, troubleshooting, or warranty service, please contact VGR customer support.

Image: A VGR customer support representative, accompanied by icons indicating a 1-year warranty and 24-hour support availability.