1. Introduction
This manual provides instructions for the installation, configuration, and operation of your XikeStor L3 16-Port 2.5G/10G Managed Network Switch. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance. This switch is designed for small and medium-sized businesses and network enthusiasts, offering advanced Layer 3 management capabilities and high-speed connectivity.
2. Key Features
- Versatile Layer 3 Managed Switch: Ideal for SMBs and enthusiasts, supporting 2.5G/10G network migration with advanced features like VLAN, QoS, and routing for enhanced performance and flexibility.
- High-Speed Connectivity and Versatile Port Configuration: Features 12x 2.5G Ethernet ports (100M/1G/2.5G), 2x 10G RJ45 ports (100M/1G/2.5G/10G), and 2x 10G SFP+ ports (1G/2.5G/10G). Supports auto-negotiation for various speeds, ensuring seamless data transfer without congestion.
- Durable Construction and Efficient Cooling: Built with a robust metal chassis and equipped with a smart thermoregulated fan for optimal heat dissipation, ensuring long-lasting and uninterrupted performance even under high workloads.
- Comprehensive Layer 3 Management Functions: Supports advanced features such as DHCP, OSPF, BGP, RIP, VLAN, ACL, and more, enabling transparent network traffic management and optimizing network performance and security.
- Multiple Management Options for Easy Use: Offers both WEB (Graphical User Interface) and CLI (Command Line Interface) management options, providing flexible control for network professionals and enthusiasts alike for easy configuration and real-time monitoring.
3. Product Overview and Components
Familiarize yourself with the physical components of your XikeStor switch.
Figure 3.1: XikeStor L3 16-Port Managed Network Switch overview, highlighting L3 management, 2.5G/10G RJ45 and SFP+ ports, routing support, and thermoregulated fan.
Figure 3.2: Detailed view of the switch ports, highlighting 12x 2.5Gbps RJ45 ports, 2x 10Gbps RJ45 ports, and 2x 10Gbps SFP+ ports, along with network bandwidth (140Gbps), packet transfer rate (208Mpps), MAC address list (16K), and system memory (512M).
Figure 3.3: External features of the switch, including two powerful and silent fans (actual color black, photo for demonstration), wall mounting holes, AC power input, ON/OFF button, grounding post for lightning protection, and additional cooling holes.
What's in the Box:
- XikeStor L3 16-Port 2.5G/10G Managed Network Switch
- EU Power Adapter
4. Setup Instructions
4.1 Physical Installation
- Unpacking: Carefully remove the switch and all accessories from the packaging. Inspect for any damage.
- Placement: Place the switch on a stable, flat surface or mount it in a standard 19-inch rack. Ensure adequate ventilation around the device.
- Power Connection: Connect the provided EU power adapter to the switch's AC power input and then to a suitable power outlet. Ensure the ON/OFF button is in the OFF position before connecting power.
- Grounding: For lightning protection, connect a grounding cable to the grounding post on the switch and to a proper earth ground.
- Network Connections:
- RJ45 Ports: Connect your network devices (computers, servers, other switches) to the 12x 2.5G RJ45 ports and 2x 10G RJ45 ports using appropriate Ethernet cables (Cat5e for 2.5G, Cat6/Cat6a for 10G).
- SFP+ Ports: Insert compatible 1G/2.5G/10G SFP+ optical modules (not included) into the 2x 10G SFP+ slots, then connect fiber optic cables to these modules.
- Power On: Once all connections are secure, switch the ON/OFF button to the ON position. The power indicator LED should illuminate.
Figure 4.1: Dimensions of the XikeStor L3 16-Port Managed Network Switch: 26cm (length) x 26cm (width) x 7cm (height).
Figure 4.2: Illustration of efficient 2.5/10 Gbit/s transmission compared to traditional networks, showing compatibility with Cat5e (2.5G), Cat6 (10G), and Cat6a (10G) cables. Also indicates compatibility with various optical module specifications (modules not included).
5. Operating Instructions
5.1 Initial Access and Configuration
The switch can be managed via a Web-based Graphical User Interface (GUI) or Command Line Interface (CLI).
- Default IP Address: 192.168.10.12
- Default Username: admin
- Default Password: admin
5.1.1 Web Management (GUI)
- Ensure your computer's IP address is in the same subnet as the switch (e.g., 192.168.10.x, with a subnet mask of 255.255.255.0).
- Open a web browser and enter the default IP address (
http://192.168.10.12) in the address bar. - Enter the default username (
admin) and password (admin) when prompted. - Upon successful login, you will access the Web GUI for basic configurations. Remember to click 'Apply' after making changes to save them permanently.
5.1.2 Command Line Interface (CLI)
For advanced configurations, the CLI can be accessed via Telnet or SSH. Refer to the detailed CLI manual for specific commands.
Figure 5.1: Screenshot illustrating the Web and CLI management interfaces. Shows basic configuration options via web and advanced settings via command line. Supported features include DHCP/DHCPv6, VLAN, LACP, STP, QoS, Static Route (IPv4/IPv6), RIP/OSPF/BGP. Note: Once configuration is complete, click 'Apply' to prevent reverting to factory settings after a power failure or firmware update.
5.2 Network Configuration Examples
The XikeStor L3 Managed Switch supports a wide range of network configurations. Below is a typical network construction case for small and medium businesses.
Figure 5.2: A network diagram illustrating a typical network setup for small and medium-sized businesses using the XikeStor switch, showing connections to the internet, routers, other switches, PCs, and NAS devices, with VLAN and LACP configurations.
Important Tips for Network Configuration:
- The networking method shown in the diagram is for reference only; please adapt it according to your specific implementation needs.
- Optical ports require optical modules for input and output, which are not shown in the diagram.
- Communication between VLANs requires the routing function provided by the higher-layer device of the switch.
6. Maintenance
- Firmware Updates: Regularly check the XikeStor website for the latest firmware updates to ensure optimal performance and security. Follow the provided instructions for firmware upgrade procedures.
- Cleaning: Keep the switch clean and free from dust. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners. Ensure ventilation openings are clear.
- Environmental Considerations: Operate the switch within the recommended temperature and humidity ranges. Avoid exposing the device to direct sunlight, excessive heat, or moisture.
7. Troubleshooting
This section provides solutions to common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Power cable disconnected; Power outlet faulty; Switch OFF. | Check power cable connection; Try a different power outlet; Ensure the ON/OFF switch is in the ON position. |
| No Network Connectivity | Ethernet cable faulty/disconnected; Incorrect IP configuration; Port disabled. | Check cable connections and replace if necessary; Verify IP settings on connected devices and the switch; Ensure the port is enabled via Web GUI or CLI. |
| Slow Network Speeds | Cable quality; Port speed mismatch; Network congestion. | Use appropriate cables (e.g., Cat6/Cat6a for 10G); Verify port speed settings; Check for network bottlenecks or excessive traffic. |
| Cannot Access Web GUI | Incorrect IP address; Computer not in same subnet; Firewall blocking access. | Verify the switch's IP address; Configure your computer's IP to be in the same subnet; Temporarily disable firewall or add an exception. |
8. Specifications
| Feature | Description |
|---|---|
| Brand | XikeStor |
| Model Number | 12x 2.5G|2x SFP+|2x 10G RJ45|Layer3 |
| Number of Ports | 16 (12x 2.5G RJ45, 2x 10G RJ45, 2x 10G SFP+) |
| Interface Type | RJ45, SFP+ |
| Data Transfer Rate (Switching Capacity) | 70 Gigabits per second |
| Switch Type | Managed (Layer 3) |
| Dimensions (L x W x H) | 26 cm x 26 cm x 7 cm |
| Compatible Devices | Desktop computer, laptop, printer, server |
| Color | Black |
| Manufacturer | Anhui Seeker Electronic Technology Co., LTD. |
| Country of Origin | China |
9. Warranty and Support
9.1 Warranty Information
This XikeStor product comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
9.2 Technical Support
For technical assistance, troubleshooting, or further inquiries, please contact XikeStor support. You can find additional resources such as user manuals, firmware updates, and command line manuals on the official XikeStor website.
Figure 9.1: A computer screen displaying a technical support interface with options for user manuals, firmware updates, command line manuals, and troubleshooting. Social media icons (Facebook, Twitter, Email) are also visible for contact.
Thank you for choosing XikeStor.