BLOKEES Transformers Wheels C01 Prime Unitary Surprise

1. Introduction

Thank you for purchasing the BLOKEES Transformers Wheels C01 Prime Unitary Surprise. This product delivers a unique building and collecting experience, allowing you to assemble a detailed Transformer figure with vehicle-inspired characteristics. This manual provides essential information for safe assembly, operation, and maintenance of your new figure.

2. Safety Information

Please read all safety warnings carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Choking Hazard: Not suitable for children under 3 years due to small parts. Adult supervision is required, especially for young children.
• Keep the packaging for important product information.
• Do not place pieces into the mouth, nose, or ears.
• Keep the product away from fire, heat sources, and liquids.
• Periodically check for missing or damaged parts before each use.
• This product is designed exclusively for play and collection; it is not a protective item.

3. What's in the Box

Each BLOKEES Transformers Wheels C01 Prime Unitary Surprise package contains the following items:

• Instruction Manual (this document)
• Surprise Figure Kit (components for one buildable Transformer figure)

Image: An individual BLOKEES Transformers Wheels C01 Prime Unitary Surprise box, featuring a red and yellow Rodimus Prime-inspired vehicle on the front. This is an example of the packaging for one surprise figure kit.

4. Assembly Instructions

Your BLOKEES figure requires assembly. Follow the steps below to construct your surprise Transformer:

1. Unpack Components: Carefully open the packaging and remove all parts from the surprise figure kit. Lay them out on a clean, flat surface.
2. Identify Parts: Refer to the included diagram (if any, typically on a small sheet within the kit) to identify the different pieces.
3. Connect Base Sections: Begin by connecting the larger base components of the figure. Ensure they snap securely into place.
4. Attach Wheels and Axles: Assemble the wheel components, ensuring they rotate freely once attached to the main body.
5. Add Detail Pieces: Attach smaller decorative and structural pieces, such as spoilers, weaponry, or cabin details, according to the design of your specific figure.
6. Verify Connections: After assembly, gently check all connections to ensure the figure is stable and all parts are firmly attached.

Image: An assembled BLOKEES figure resembling Optimus Prime in truck mode. This illustrates a completed buildable figure from the kit.

5. Operating Instructions (Transformation)

The BLOKEES Transformers Wheels figures are designed to be transformable, offering dynamic play and display options. While specific transformation steps vary by figure, the general principle involves reconfiguring the parts to switch between modes.

• Identify Pivot Points: Locate the joints and hinges on your figure that allow for movement and reconfiguration.
• Gentle Manipulation: Apply gentle, steady pressure when moving parts. Avoid forcing components, as this can cause breakage.
• Follow Design Cues: The design of each figure guides its transformation. Observe how parts are intended to fold, extend, or rotate to achieve the alternate mode.
• Practice: Transformation may require some practice to become smooth. Refer to any diagrams provided with your specific figure for detailed steps.

Image: An assembled BLOKEES figure resembling Rodimus Prime in car mode. This demonstrates another example of a completed buildable figure.

Image: An assembled BLOKEES figure resembling Megatron in tank mode. This showcases the variety of figures available.

Image: A collection of three different BLOKEES Transformers Wheels figures in their vehicle modes, including a green jeep, a blue race car, and a white and black police car. This highlights the diverse range of designs.

6. Care and Maintenance

Proper care will ensure the longevity of your BLOKEES figure.

• Cleaning: Wipe the figure with a soft, dry cloth to remove dust. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
• Storage: Store the figure in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
• Inspection: Periodically inspect the figure for any loose or damaged parts. If any parts are broken, discontinue use to prevent further damage or potential hazards.

7. Troubleshooting

If you encounter any issues with your BLOKEES figure, consider the following common solutions:

• Difficulty Assembling: Ensure all parts are correctly oriented and aligned before attempting to snap them together. Refer to the assembly diagram for your specific figure.
• Loose Connections: If parts feel loose, gently press them together until a secure connection is felt or heard. If a connection remains loose, inspect the connecting pegs and holes for any deformities.
• Missing Parts: If you believe a part is missing from your kit, carefully check all packaging materials. If a part is genuinely missing, please contact customer support.

8. Product Specifications

9. Warranty and Customer Support

BLOKEES products are manufactured with quality and care. For information regarding warranty coverage or to obtain customer support for your BLOKEES Transformers Wheels C01 Prime Unitary Surprise, please refer to the contact information provided on the product packaging or visit the official BLOKEES website. Please have your product model number (75604) and UPC (810181532067) available when contacting support.