Introduction
This manual provides detailed instructions for the safe and effective use of your VGR V-996 Professional Hair Trimmer. This precision cordless beard and hair clipper is designed for personal grooming, featuring ceramic and titanium-coated blades, a powerful 7000 RPM motor, and an LED display for battery status. Please read this manual thoroughly before first use and retain it for future reference.
Image: The VGR V-996 Professional Hair Trimmer, showcasing its ergonomic design and LED display.
Safety Information
For your safety and to prevent damage to the device, please observe the following precautions:
- Keep out of reach of children.
- Do not use on animals.
- Do not use or store near water or in wet environments.
- Always turn off the trimmer before cleaning or changing attachments.
- Do not attempt to open or repair the device yourself. Contact customer support for service.
- Avoid exposing the trimmer to extreme temperatures or direct sunlight.
- Use only as directed in this manual.
Package Contents
Verify that all items are present in the package:
- 1 x VGR V-996 Hair Trimmer
- 4 x Guide Combs (1.5mm, 3mm, 6mm, 9mm)
- 1 x Cleaning Brush
- 1 x Blade Protection Cap
- 1 x Lubricating Oil
- 1 x USB Charging Cable
Product Overview
The VGR V-996 is engineered for precision and convenience. Key features include:
- Precision T-Blade: Equipped with premium ceramic and titanium-coated blades for sharp, smooth, and durable cutting.
- Cordless Design: Offers maximum mobility and ease of use for home or travel.
- Turbo Motor: A powerful 7000 RPM motor ensures high-speed, precise cutting without snagging.
- LED Digital Display: Clearly shows battery level and indicates Turbo mode status.
- Long-Lasting Battery: Integrated 2000mAh lithium battery provides up to 300 minutes of cordless runtime.
- Ergonomic Design: Lightweight and comfortable grip reduces hand fatigue during use.
Setup
1. Initial Charging
Before first use, fully charge the trimmer. Connect the USB charging cable to the trimmer's charging port and plug the other end into a compatible USB power adapter (not included). The LED display will indicate the charging progress. A full charge takes approximately 3 hours and provides up to 300 minutes of runtime.
2. Attaching Guide Combs
Select the desired guide comb (1.5mm, 3mm, 6mm, or 9mm) for your preferred hair length. Align the comb with the trimmer blade and push it firmly until it clicks into place. To remove, gently pull the comb away from the blade.
Operating Instructions
1. Power On/Off
Press the power button to turn the trimmer ON. Press it again to turn OFF. The LED display will activate upon power-on.
2. Basic Trimming
For best results, use the trimmer on clean, dry hair. Hold the trimmer with the blade flat against the skin or at a slight angle, depending on the desired cut. Move the trimmer slowly against the direction of hair growth. For beard and mustache trimming, start with a longer guide comb and gradually reduce the length until the desired style is achieved.
3. Precision Trimming and Detailing
For precise lines, edging, and detailing around the neckline, sideburns, or beard, remove the guide comb. Use the bare blade carefully, holding it perpendicular to the skin to create sharp edges. Exercise caution to avoid nicks or cuts.
4. Turbo Mode
If your trimmer features a Turbo mode, activate it for increased motor speed and power, useful for thicker hair. Refer to the LED display for Turbo mode indication.
Maintenance
1. Cleaning the Blades
After each use, turn off the trimmer and remove any attached guide comb. Use the provided cleaning brush to remove loose hairs from the blades. For a more thorough cleaning, the blade head can be carefully detached (if applicable, refer to specific product design) and rinsed under running water. Ensure the blade head is completely dry before reattaching or storing.
2. Lubrication
Regular lubrication is essential for optimal blade performance and longevity. Apply 1-2 drops of the provided lubricating oil onto the blades after every few uses, or as needed. Turn the trimmer on for a few seconds to distribute the oil evenly, then wipe off any excess.
3. Storage
Store the trimmer in a cool, dry place, away from direct sunlight and moisture. Always place the blade protection cap over the blades when not in use to prevent damage and ensure safety.
Troubleshooting
If you encounter issues with your VGR V-996 trimmer, please consult the following table before contacting customer support:
| Problem | Possible Cause | Solution |
|---|---|---|
| Trimmer does not turn on or has low power. | Battery is low or depleted. | Charge the trimmer fully using the provided USB cable. Ensure the charging indicator is active. |
| Blades are pulling or snagging hair. | Blades are dirty, clogged with hair, or not lubricated. | Clean the blades thoroughly with the cleaning brush. Apply a few drops of lubricating oil to the blades. Ensure guide comb is properly attached. |
| Reduced cutting performance. | Blades are dull, dirty, or battery is low. | Clean and lubricate blades. Ensure the trimmer is fully charged. If performance does not improve, blades may need replacement (contact support). |
| Trimmer gets hot during use. | Prolonged use or blades are not lubricated. | Allow the trimmer to cool down. Ensure blades are clean and properly lubricated. Avoid continuous operation for extended periods. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | V-996 Professional |
| Blade Material | Ceramic, Stainless Steel (Titanium-coated) |
| Motor Speed | 7000 RPM (Turbo) |
| Battery Type | 2000mAh Lithium Battery |
| Charging Time | Approximately 3 hours |
| Runtime | Up to 300 minutes |
| Charging Interface | USB Type-C |
| Guide Combs | 1.5mm, 3mm, 6mm, 9mm |
| Product Dimensions (LxWxH) | 16 x 4 x 3.5 cm |
| Item Weight | 110 g |
| Display | LED Digital Display |
Warranty and Support
Warranty Information
The VGR V-996 Professional Hair Trimmer comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized repair, or normal wear and tear.
Customer Support
For any questions, technical assistance, or warranty claims, please contact VGR customer support:
- Email: customercare@vgrofficial.in
- Phone: 9667796740 or 18002578939 (Monday to Saturday, 10:00 AM to 6:00 PM)
- Website: www.vgrofficial.in
