Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your DERCASS Functional Loft Bed. Designed for space efficiency, this Twin-sized loft bed in White features integrated storage including shelves, wardrobes, and drawers, along with a ladder that offers additional storage compartments. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.

Image: The DERCASS Functional Loft Bed, fully assembled, showcasing its integrated storage solutions and ladder.
Safety Information
Your safety is paramount. Please adhere to the following safety guidelines:
- Maximum Weight Capacity: The upper bed is designed to support a maximum weight of 400 lbs (181 kg). Do not exceed this limit.
- Mattress Thickness: Use a mattress with a maximum thickness of 6 inches (15 cm) to ensure the safety guardrails are effective.
- Guardrails: Always ensure guardrails are securely in place. They are designed to prevent falls from the upper bunk.
- Assembly: Assembly must be performed by at least two adults. Ensure all hardware is tightened securely before use. Periodically check and re-tighten all connections.
- Ladder Safety: Always use the ladder for entry and exit from the upper bunk. Do not jump on the bed.
- Ventilation: Ensure adequate ventilation around the bed.
- Children: This loft bed is not recommended for children under 6 years of age.
- Flammable Materials: Keep flammable materials away from the bed.
Package Contents
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
The DERCASS Functional Loft Bed is shipped in three packages. Please ensure you have received all three.
- Bed Frame Components (Pine Wood + MDF)
- Ladder with Integrated Storage
- Two Wardrobes
- Three Shelves
- Two Drawers
- Hardware Pack (screws, bolts, connectors, etc.)
- Assembly Tools (typically Allen wrenches, not always included)
Setup and Assembly
Assembly is required for this product. It is recommended that two adults perform the assembly. Please follow the step-by-step instructions provided in the separate assembly guide included with your product. Ensure you have ample space for assembly and keep all small parts out of reach of children.
Key Assembly Notes:
- Tools: Basic hand tools (e.g., screwdriver, hammer) may be required in addition to any included Allen wrenches.
- Ladder Placement: The ladder can be installed on either the left or right side of the bed frame, depending on your room layout. Decide on the preferred orientation before starting assembly.
- Hardware: Do not overtighten screws during initial assembly. Tighten all hardware firmly once the entire structure is assembled.
- Slats: The bed includes 14 slats designed to support your mattress directly, eliminating the need for a box spring. Ensure all slats are evenly spaced and securely fastened.

Image: Dimensional overview of the loft bed, useful for planning placement and understanding component sizes during assembly.

Image: The loft bed assembled with the ladder on the left, demonstrating one possible configuration.

Image: The loft bed assembled with the ladder on the right, demonstrating an alternative configuration.
Operating Instructions
Once assembled, your DERCASS Functional Loft Bed is ready for use. This bed is designed to maximize space and provide integrated storage.
Using the Bed:
- Upper Bunk: Access the upper bunk using the integrated ladder. Always face the ladder when climbing up or down.
- Mattress: Place a Twin-sized mattress (maximum 6 inches thick) directly on the wooden slats. No box spring is required.
Utilizing Storage:
- Wardrobes: The two wardrobes provide enclosed storage for clothing or other items. Open the doors to access.
- Shelves: The three open shelves are ideal for books, decorative items, or frequently accessed belongings.
- Drawers: The two drawers offer concealed storage for smaller items. Pull the knobs to open.
- Ladder Storage: Each step of the ladder features a compartment for additional small item storage.

Image: View of the loft bed with storage compartments open, illustrating the available space within the wardrobes, shelves, and drawers.
Maintenance
Proper care will extend the life and appearance of your loft bed.
- Cleaning: Wipe surfaces with a dry cloth. For stubborn marks, a slightly damp cloth followed by a dry cloth can be used. Avoid harsh chemicals or abrasive cleaners.
- Hardware Check: Periodically (e.g., every 3-6 months) check all bolts, screws, and connections to ensure they remain tight. Re-tighten as necessary to maintain structural integrity.
- Avoid Moisture: Protect the bed from excessive moisture and direct sunlight to prevent warping or discoloration.
Troubleshooting
If you encounter any issues with your loft bed, refer to the following common solutions:
- Bed feels wobbly:
- Ensure all assembly hardware (bolts, screws) are fully tightened.
- Verify that the bed is placed on a flat, level surface.
- Drawers or wardrobe doors stick:
- Check for any obstructions in the drawer slides or door hinges.
- Ensure the bed frame is square and level, as misalignment can affect moving parts.
- Missing parts during assembly:
- Double-check all packaging materials.
- Contact DERCASS customer support with the specific part number from your assembly manual.
Specifications
| Model Number | GX000325A |
| Brand | DERCASS |
| Size | Twin |
| Color | White |
| Material | Pine Wood, MDF (Engineered Wood) |
| Overall Product Dimensions (L x W x H) | 93.3" x 42.4" x 61.4" (237 cm x 107.7 cm x 156 cm) |
| Platform Bed Dimensions | 78.3" x 42.4" (198.9 cm x 107.7 cm) |
| Upper Bed Slats Quantity | 14 |
| Overall Product Weight | 256.5 lbs (116.3 kg) |
| Weight Capacity (Upper Bed) | 400 lbs (181 kg) |
| Recommended Mattress Thickness | 6 inches (15 cm) |
| Assembly Required | Yes |
| Number of Packages | 3 |
| UPC | 762032557128 |
Warranty and Support
This DERCASS Functional Loft Bed (Model: GX000325A) comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use.
The warranty does not cover:
- Damage due to improper assembly or misuse.
- Normal wear and tear.
- Damage caused by accidents, abuse, neglect, or unauthorized modifications.
For warranty claims, missing parts, or any other product support inquiries, please contact DERCASS customer service directly. Please have your model number (GX000325A) and proof of purchase available when contacting support.
Customer Support: Please refer to the contact information provided with your purchase or visit the official DERCASS website for support options.