Introduction
Thank you for choosing the VINGLI Modern Bar Stool. This manual provides essential information for the safe assembly, proper use, and maintenance of your new bar stool. Please read these instructions carefully before assembly and retain them for future reference.
Safety Information
- Weight Limit: Do not use if you exceed 330 pounds (150 kg) to ensure stability and prevent accidents.
- Assembly: Ensure all parts are correctly assembled and fasteners are tightened before use. Periodically check and re-tighten all fasteners.
- Stability: Always use the bar stool on a flat, stable surface.
- Children: Keep children away from the assembly area. Small parts may pose a choking hazard.
- Movement: Avoid sudden or excessive leaning or rocking, which may cause the stool to tip over.
Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged:
- 1 x Barstool Seat and Backrest Assembly
- 1 x Set of Solid Wood Legs
- 1 x Assembly Hardware Set (screws, washers, Allen wrench)
- 1 x Instruction Manual
Note: If any parts are missing or damaged, please contact customer support before proceeding with assembly.
Assembly Instructions
Assembly is quick and straightforward, typically taking approximately 30 minutes. All necessary tools are included.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Legs to Seat Base: Align the solid wood legs with the pre-drilled holes on the underside of the seat base. Secure them using the provided screws and washers. Do not fully tighten yet.
- Install Footrest: Attach the footrest bar to the designated slots on the legs. Secure with screws.
- Tighten All Fasteners: Once all components are loosely assembled, gradually tighten all screws evenly until secure. Do not overtighten.
- Attach Adjustable Foot Pads: Screw the adjustable foot pads into the bottom of each leg. Adjust them as needed to stabilize the stool on uneven floors.
Operating Instructions
The VINGLI Modern Bar Stool is designed for comfortable and convenient use in various settings.
- 360° Swivel Function: The seat offers a smooth 360-degree swivel, allowing for easy rotation without needing to reposition the entire stool.
- Weight Capacity: The stool is designed to support a maximum weight of 330 pounds (150 kg). Do not exceed this limit.
- Adjustable Foot Pads: The foot pads at the base of the legs can be adjusted to ensure stability on uneven floor surfaces. Turn them clockwise or counter-clockwise to raise or lower each leg slightly.
Care and Maintenance
Proper care will extend the life and appearance of your bar stool.
- Cleaning PU Leather: Wipe the PU leather upholstery with a soft, damp cloth. For tougher stains, use a mild soap solution and immediately wipe dry. Avoid harsh chemicals or abrasive cleaners.
- Cleaning Wood Legs: Dust the solid wood legs with a soft, dry cloth. For spills, wipe immediately with a damp cloth and dry thoroughly. Avoid prolonged exposure to moisture.
- Regular Inspection: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten as necessary to maintain stability.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to the upholstery and wood finish.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool is wobbly | Uneven floor surface or loose fasteners. | Adjust the foot pads on the bottom of the legs. Check and tighten all assembly screws. |
| Swivel mechanism is stiff | Lack of lubrication or debris in the mechanism. | Apply a small amount of silicone-based lubricant to the swivel mechanism. Ensure no debris is obstructing movement. |
| Squeaking noise during use | Loose connections or friction between parts. | Check and tighten all screws. Apply lubricant to moving parts if necessary. |
Product Specifications
- Model Number: BWBS-BK1
- Product Dimensions: 18.1"D x 38.9"W x 17.3"H
- Seat Height: Approximately 26 inches
- Color: Black-square (as per current model)
- Frame Material: Wood
- Seat Material Type: PU Leather
- Maximum Weight Recommendation: 330 pounds (150 kg)
- Item Weight: 15 pounds (6.8 kg)
- Included Components: 1 Barstool, 1 Assembly Hardware Set, 1 Instruction Manual
Warranty Information
VINGLI products are manufactured to high-quality standards. For specific warranty details regarding your bar stool, please refer to the warranty card included in your packaging or visit the official VINGLI website. Keep your purchase receipt as proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact VINGLI customer support:
- Website: Visit the VINGLI Store on Amazon
- Email: Refer to your product packaging or the VINGLI website for direct contact information.
Please have your model number (BWBS-BK1) and purchase date available when contacting support.