MOKKOM Sparkling Water Maker Model 806A Instruction Manual

1. Important Safety Information

Please read all instructions carefully before using the MOKKOM Sparkling Water Maker. Keep this manual for future reference.

• Use only with cold water. Do not carbonate hot liquids.
• Do not carbonate anything other than water if the bottle is not designed for it. This MOKKOM model is designed to carbonate various beverages, but ensure the liquid is pulp-free.
• Do not use damaged bottles. Inspect bottles for cracks or damage before each use.
• Keep the appliance out of reach of children.
• Only use compatible 60L screw-in CO2 gas cylinders. Do not use quick-connect cylinders.
• Do not remove the bottle during carbonation.
• Ensure the appliance is placed on a stable, flat surface.

2. Product Overview

The MOKKOM Sparkling Water Maker is designed to transform ordinary water and other beverages into sparkling drinks. Its stainless steel construction ensures durability and a sleek appearance.

Package Contents:

• 1x MOKKOM Soda Maker
• 1x 1L PET Water Bottle
• 1x User Manual (this document)
• 1x Straw Cleaning Brush

Note: A 60L screw-in CO2 gas cylinder is NOT included and must be purchased separately.

Figure 2.1: What's in the Box

3. Setup Instructions

3.1 Installing the CO2 Cylinder

1. Ensure the soda maker is on a stable surface.
2. Locate the empty space at the bottom of the machine for the CO2 cylinder.
3. Carefully screw the 60L CO2 cylinder into the designated slot in a clockwise motion until it is securely fastened. You should hear a "click" sound indicating proper installation.

3.2 Preparing the Water Bottle

1. Fill the 1L PET water bottle with cold water. Ensure the water level is between the MIN (650ml) and MAX (1000ml) lines indicated on the bottle.
2. Push the filled water bottle upwards into the carbonation head with a slight force until you hear a "click" sound, confirming it is securely installed.

Figure 3.1: Quick-Lock Mechanism for Bottle Installation and Carbonation

4. Operating Instructions

4.1 Carbonating Water

1. With the CO2 cylinder installed and the water bottle securely attached, gently press down the carbonation lever.
2. Inflate each bottle of water no more than 3 times. It is best if each press lasts no longer than 2 seconds.
3. Listen for a hissing sound, which indicates carbonation is occurring.
4. For light fizz, press once. For standard fizz, press twice. For stronger refreshment, press three times.
5. After carbonation, wait for 3-5 seconds before pressing the bottle lock release button to remove the water bottle.

Figure 4.1: Customize Your Fizz Level

4.2 Carbonating Other Beverages

The MOKKOM Sparkling Water Maker can carbonate various pulp-free beverages, including juices, syrups, wines, and cocktails. Ensure the liquid is free of pulp to prevent clogging.

1. Fill the 1L PET bottle with your desired pulp-free beverage, ensuring the liquid level is between the MIN and MAX lines.
2. Follow the same carbonation steps as for water (Section 4.1).
3. Enjoy your freshly carbonated drink.

Figure 4.2: Carbonate More Than Just Water

5. Maintenance and Cleaning

5.1 Cleaning the Drip Tray

The stainless steel drip tray cover is removable for easy cleaning. Simply lift the cover, empty any spills, and wash with mild soap and water. Ensure it is dry before placing it back.

Figure 5.1: Removable Stainless Steel Drip Tray

5.2 Cleaning the Nozzle and Spray Pipe

The MOKKOM Sparkling Water Maker features a detachable nozzle and spray pipe for thorough cleaning, which helps prevent freezing and clogging.

1. Carefully detach the spray pipe and nozzle from the bottle cap.
2. Use the provided straw cleaning brush to clean the inside of the spray pipe and the nozzle.
3. Rinse all parts with water and ensure they are dry before reassembling.
4. To reassemble, twist the long pipe clockwise into the cap, then screw the nozzle clockwise onto the pipe. Finally, twist the cap into the bottle mouth.

Figure 5.2: Exclusive Detachable Design for Easy Cleaning

6. Troubleshooting

If you encounter issues with your MOKKOM Sparkling Water Maker, refer to the common problems and solutions below.

6.1 No Carbonation or Weak Fizz

• CO2 Cylinder Empty: The CO2 cylinder may be out of gas. Replace it with a new, compatible 60L screw-in CO2 cylinder.
• Loose CO2 Cylinder: Ensure the CO2 cylinder is tightly screwed in clockwise. A loose connection can prevent gas flow.
• Blocked Nozzle/Spray Pipe: The spray pipe or nozzle might be blocked. Remove and clean them as described in Section 5.2.
• Insufficient Presses: Ensure you are pressing the carbonation lever 2-3 times for adequate fizz, holding each press for no longer than 2 seconds.
• Water Level: Ensure the water level is within the MIN and MAX lines on the bottle. Overfilling or underfilling can affect carbonation.

6.2 Water Leaks During Carbonation

• Bottle Not Secure: Ensure the water bottle is securely installed into the carbonation head until you hear a "click".
• Damaged Bottle: Inspect the bottle for any cracks or damage. Do not use a damaged bottle.
• Overfilling: Do not fill the bottle above the MAX line.

7. Product Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact MOKKOM customer service directly. Details can often be found on the manufacturer's official website or through your retailer.