Hover-1 All-Star 2.0 Self Balancing Scooter User Manual

Introduction

Thank you for purchasing the Hover-1 All-Star 2.0 Self Balancing Scooter. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before your first ride to ensure a safe and enjoyable experience. Retain this manual for future reference.

Safety Information

Operating any electric vehicle carries inherent risks. To minimize these risks, it is crucial to follow all instructions and warnings in this manual. Failure to do so may result in property damage, serious injury, or death.

• Always wear a helmet and appropriate safety gear (knee pads, elbow pads, wrist guards) when riding.
• The Hover-1 All-Star 2.0 is UL2272 certified, meaning it has been tested to applicable safety standards. However, safe operation is still paramount.
• Do not operate the scooter under the influence of alcohol or drugs.
• Observe all local traffic laws and regulations.
• Avoid riding on uneven surfaces, steep inclines, or near water.
• This product is recommended for users within the specified age and weight limits. Refer to the Specifications section for details.
• Keep fingers and all body parts away from moving parts.
• Do not attempt to modify the scooter. Any modifications will void the warranty and may compromise safety.

Package Contents

Ensure all items are present and in good condition upon unpacking:

• Hover-1 All-Star 2.0 Self Balancing Scooter
• Charging Adapter
• User Manual (this document)

Product Overview

Familiarize yourself with the components of your Hover-1 All-Star 2.0 scooter.

Image: The Hover-1 All-Star 2.0 Self Balancing Scooter, black in color, featuring LED lights on the wheels and footpads. This image displays the overall design and illuminated elements of the scooter.

• Footpads: Pressure-sensitive pads for control.
• Wheels: Equipped with colorful LED lights.
• LED Headlight: For visibility.
• Charging Port: Location for connecting the charging adapter.
• Power Button: To turn the scooter on/off.
• Bluetooth Speaker: Integrated for audio playback.

Charging the Device

Before your first ride, fully charge the scooter for approximately 5 hours. Always use the provided charging adapter.

1. Ensure the scooter is powered off.
2. Locate the charging port on the scooter.
3. Connect the charging adapter to the scooter's charging port.
4. Plug the charging adapter into a standard wall outlet.
5. The indicator light on the charger will typically turn red during charging and green when fully charged.
6. Once fully charged, disconnect the charger from the scooter and the wall outlet.

Important: Do not leave the scooter charging unattended for extended periods. The built-in 36V/2.0 Ah Lithium-ion battery is certified, and its safety shield enclosure helps prevent overheating.

Setup

No complex assembly is required. After charging, your Hover-1 All-Star 2.0 is ready for initial setup and calibration.

1. Power On: Press the power button to turn on the scooter.
2. Calibration (if needed): If the scooter does not seem balanced or drifts, it may need calibration.
   • Place the scooter on a flat, level surface.
   • Ensure the scooter is powered off.
   • Press and hold the power button for approximately 10-15 seconds until the lights flash.
   • Release the button and power off the scooter.
   • Power on again to complete calibration.

Operating Instructions

The Hover-1 All-Star 2.0 uses a dynamic stabilization system with gyroscopes and acceleration sensors for intuitive control.

Image: A person riding a Hover-1 self-balancing scooter outdoors, demonstrating typical use. This image illustrates the user in motion on the device.

1. Mounting:
   • Place one foot firmly on a footpad. The scooter will stabilize itself.
   • Quickly step up with your other foot onto the second footpad.
   • Maintain a relaxed, upright posture with a slight bend in your knees.
2. Moving Forward/Backward:
   • Lean slightly forward to move forward.
   • Lean slightly backward to move backward.
   • The amount of lean determines your speed.
3. Turning:
   • To turn left, press your right foot forward slightly and your left foot backward slightly.
   • To turn right, press your left foot forward slightly and your right foot backward slightly.
4. Stopping:
   • Return to an upright, neutral position to slow down and stop.
   • To dismount, step off one foot at a time, preferably backward.

Practice in a safe, open area until you are comfortable with the controls. The scooter can reach speeds up to 7 mph and has a range of up to 7 miles.

Bluetooth Speaker

Your Hover-1 All-Star 2.0 features a built-in Bluetooth speaker for audio playback.

1. Ensure the scooter is powered on.
2. Enable Bluetooth on your mobile device.
3. Search for "Hover-1" or a similar device name in your device's Bluetooth settings.
4. Select the scooter to pair. You may hear an audible confirmation.
5. Once paired, you can play audio from your device through the scooter's speaker.

Note: The Bluetooth speaker has a limited range. Keep your paired device close to the scooter for optimal performance.

Maintenance

Regular maintenance ensures the longevity and safe operation of your scooter.

• Cleaning: Wipe the scooter with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Avoid getting water into electronic components.
• Storage: Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery to about 50% every few months to maintain battery health.
• Battery Care: Avoid completely draining the battery. Charge it regularly. If the battery is damaged or shows signs of malfunction, contact support immediately.
• Tire Inspection: Periodically check the tires for wear and tear.

Troubleshooting

If you encounter issues with your Hover-1 All-Star 2.0, refer to the following common problems and solutions:

If these steps do not resolve the issue, please contact Hover-1 customer support.

Specifications

• Model Name: All-Star 2.0
• Brand: Hover-1
• Motor: 400W (2 x 200W)
• Max Speed: Up to 7 mph
• Max Range: Up to 7 miles
• Max Incline: 10 degrees
• Battery: 36V/2.0 Ah Lithium-ion (certified)
• Charge Time: Approximately 5 hours
• Dimensions (LxWxH): 24.8 x 8.85 x 9 inches
• Material: Aluminium, Plastic
• Special Features: LED Lighted Wheels & Footpad, Bluetooth Speaker, LED Headlight
• Safety Certification: UL2272
• Age Range: Kid, Youth

Warranty and Support

The Hover-1 All-Star 2.0 Self Balancing Scooter comes with a 90 Day Warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.

For warranty claims, technical support, or further assistance, please contact Hover-1 customer service. Keep your proof of purchase for warranty validation.

Manufacturer: DGL Group