POOL BLASTER Max CG

POOL BLASTER Max CG Cordless Pool Vacuum Instruction Manual

Model: Max CG

Introduction

Thank you for choosing the POOL BLASTER Max CG Cordless Pool Vacuum. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pool cleaner. Please read all instructions carefully before use and retain this manual for future reference.

The POOL BLASTER Max CG is designed to provide powerful, cordless cleaning for both inground and above-ground pools. Its robust design and microfilter bags ensure effective removal of dirt, sand, and silt, keeping your pool sparkling clean.

Important Safety Information

WARNING: Read and understand all instructions before using this appliance. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

  • Do not operate the cleaner when people are in the pool.
  • This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Keep children away from the cleaner and charging unit.
  • Use only the charger supplied by the manufacturer to recharge.
  • Do not use the cleaner if the power cord or charger is damaged.
  • Never attempt to open the motor housing.
  • Ensure the charging port is dry before connecting the charger.
  • Store the cleaner in a cool, dry place when not in use.

Product Overview and Components

The POOL BLASTER Max CG comes with several key components for efficient pool cleaning. Familiarize yourself with each part before assembly and operation.

Exploded view of POOL BLASTER Max CG components including the main unit, vacuum head, debris chamber, filter bag, and charger.
This image displays the various components of the POOL BLASTER Max CG, including the main motor unit, the transparent debris chamber, the vacuum head, the filter bag, and the charging adapter. Understanding these parts is crucial for proper assembly and maintenance.

Key Components:

  • Main Unit: Contains the P30 motor and battery.
  • Debris Chamber: Transparent chamber for collecting debris.
  • Vacuum Head: Attaches to the debris chamber for efficient cleaning of pool surfaces.
  • Microfilter Bag: Designed to capture fine dirt, sand, and silt.
  • Charger: For recharging the unit's lithium-ion battery.
POOL BLASTER Max CG with XL debris chamber and vacuum head.
The image highlights the XL debris chamber and the wide vacuum head, designed for faster and more efficient cleaning of larger areas.

Setup

1. Charging the Battery

Before initial use, fully charge the POOL BLASTER Max CG for approximately 4 hours. The unit is powered by a rechargeable lithium-ion battery, providing up to 60 minutes of runtime per charge.

Diagram showing cord-free operation, 60-minute run time, and 4-hour fast charging for the POOL BLASTER Max CG.
This diagram illustrates the key features of the POOL BLASTER Max CG: its cord-free and hose-free design, a 60-minute operational run time, and a fast charging capability that fully recharges the battery in 4 hours.
  1. Ensure the charging port on the main unit is clean and dry.
  2. Connect the charger to the unit's charging port.
  3. Plug the charger into a standard electrical outlet.
  4. The charging indicator light will illuminate (refer to your unit's specific indicator behavior).
  5. Once fully charged, disconnect the charger from the unit and the outlet.

2. Assembling the Cleaner

  1. Install the Filter Bag: Open the debris chamber and securely place the microfilter bag inside. Ensure the bag's opening aligns with the intake.
  2. Attach Debris Chamber: Connect the debris chamber, with the filter bag installed, to the main motor unit. Twist or click into place until secure.
  3. Attach Vacuum Head: Securely attach the vacuum head to the bottom of the debris chamber.
  4. Attach Pole (Optional): For extended reach, attach a standard telescopic pool pole to the designated pole adapter on the main unit.
POOL BLASTER Filter Bag packaging and two filter bags.
This image shows the packaging for POOL BLASTER filter bags and two individual microfilter bags. These genuine bags are essential for capturing fine debris and maintaining cleaning efficiency.

Operating Instructions

The POOL BLASTER Max CG is designed for easy, push-button operation, making pool cleaning simple and effective.

1. Powering On and Off

  1. To turn on the cleaner, press the power button located on the main unit. The unit will begin to operate.
  2. To turn off the cleaner, press the power button again.

2. Cleaning Your Pool

The Max CG is suitable for cleaning both inground and above-ground pools, effectively removing debris from all surfaces.

POOL BLASTER Max CG cleaning a pool, with text indicating suitability for large in-ground and above-ground pools, and safety for salt water & chlorine.
This image demonstrates the POOL BLASTER Max CG in action, highlighting its suitability for large in-ground and above-ground pools. It also confirms the cleaner is safe for use in both salt water and chlorinated environments.
  1. Submerge the cleaner into the pool water. Ensure the unit is fully submerged before turning it on to prevent air pockets.
  2. Turn on the cleaner using the power button.
  3. Slowly guide the vacuum head across the pool floor, walls, and steps. The powerful suction will draw in debris.
  4. Move the cleaner steadily to allow the suction to effectively pick up dirt, sand, and silt.
  5. When finished, turn off the cleaner before removing it from the water.
Close-up of the POOL BLASTER Max CG's debris chamber showing collected debris and powerful suction.
A close-up view of the POOL BLASTER Max CG's transparent debris chamber, illustrating the powerful suction as it collects fine particles and debris from the pool water.
Aerial view of a person cleaning a pool with the POOL BLASTER Max CG attached to a pole, emphasizing no cords or hoses needed.
An aerial perspective showing a user cleaning a pool with the POOL BLASTER Max CG attached to a telescopic pole. This image highlights the convenience of its cordless and hose-free design, eliminating the need for external power cords or garden hose hook-ups.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your POOL BLASTER Max CG.

1. Cleaning the Filter Bag

The microfilter bag is designed to capture fine debris. It should be cleaned after each use or when suction power decreases.

  1. Turn off the cleaner and remove it from the pool.
  2. Detach the debris chamber from the main unit.
  3. Remove the filter bag from the debris chamber.
  4. Empty any collected debris into a waste receptacle.
  5. Rinse the filter bag thoroughly with a garden hose until all debris is removed.
  6. Allow the filter bag to air dry completely before reinserting it into the debris chamber.

2. Cleaning the Unit

  1. Rinse the debris chamber and vacuum head with fresh water after each use.
  2. Wipe down the main unit with a damp cloth. Do not submerge the main unit in water or spray directly with a hose.
  3. Ensure all components are dry before storage.

3. Storage

Store the POOL BLASTER Max CG in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (not fully depleted or fully charged) if storing for extended periods to prolong battery life.

Troubleshooting

ProblemPossible CauseSolution
Cleaner does not turn on.Battery is depleted.Charge the battery for 4 hours.
Power button malfunction.Contact customer support.
Reduced suction power.Filter bag is full or clogged.Clean the filter bag thoroughly.
Debris chamber is not properly sealed.Ensure the debris chamber is securely attached to the main unit.
Intake nozzle is blocked.Check and clear any obstructions from the intake.
Cleaner stops unexpectedly.Battery is depleted.Recharge the battery.
Overheating (unlikely with normal use).Allow the unit to cool down before restarting.

Specifications

  • Model: POOL BLASTER Max CG
  • Power Source: Rechargeable Lithium-Ion Battery
  • Run Time: Up to 60 minutes
  • Charge Time: Approximately 4 hours
  • Motor: P30 Professional-Grade Motor
  • Filter Type: Genuine Microfilter Bags (captures fine dirt, sand, silt)
  • Pool Types: Inground and Above Ground Pools
  • Design: Cordless, Hose-Free
  • ASIN: B0FTJK2P7Q

Support and Warranty Information

For technical assistance, replacement parts, or warranty inquiries, please contact POOL BLASTER customer support. Service and support for this product are based in New Jersey, USA.

Please refer to your purchase documentation or the official POOL BLASTER website for the most current warranty terms and contact information.

Contact Information:

Image showing 'Designed & Engineered in the USA' with a map of the USA and 'Service & Support based in New Jersey'.
This image highlights that the product is designed and engineered in the USA, with service and support operations based in New Jersey, ensuring local assistance for customers.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.