E-YEEGER V100Pro Dash Cam User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your E-YEEGER V100Pro Dash Cam. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

2. Package Contents

Verify that all items listed below are included in your package:

• E-YEEGER V100Pro Dash Cam
• Car Charger (11.5ft cable)
• 32GB SD Card (pre-installed or included separately)
• 3M Adhesive Pad (extra)
• Electrostatic Sticker
• Easy Pry Tool
• User Manual
• Quick Guide

3. Product Overview

The E-YEEGER V100Pro is a compact 2.5K Wi-Fi dash camera designed for vehicle recording. It features a 1.47-inch IPS screen, a 160° wide-angle lens, G-Sensor, loop recording, night vision capabilities, and 24-hour parking mode (with optional hardwire kit).

Key Features:

• 2.5K 1440P Recording: Captures video at 2560x1440P resolution with a 160° wide-angle lens.
• 1.47" IPS Screen: Provides a clear display for reviewing recordings directly on the device.
• Compact & Durable Design: Features a heat-proof chip and aluminum shell, operating from -40°F to 185°F.
• Wi-Fi & App Control: Connects to the E-YEEGER V100Pro app for live viewing, downloading, and settings adjustment.
• G-Sensor: Automatically locks video footage upon impact to prevent overwriting.
• Loop Recording: Continuously records, overwriting the oldest unlocked files when the SD card is full.
• 24H Parking Mode: Monitors your vehicle when parked (requires optional Hardwire Kit).
• Night Vision: Enhanced low-light recording with an F/1.8 aperture and 6-layer glass lens.
• Expandable Storage: Supports up to 256GB SD cards (32GB included).

4. Setup and Installation

4.1 Inserting the SD Card

1. Ensure the dash cam is powered off.
2. Locate the SD card slot on the side of the dash cam.
3. Insert the provided 32GB SD card (or another compatible U1+ card up to 256GB) into the slot until it clicks into place.
4. To remove, gently push the card in until it springs out.

4.2 Mounting the Dash Cam

1. Clean the area on your windshield where you intend to mount the dash cam.
2. Apply the electrostatic sticker to the cleaned area. This helps protect your windshield and makes removal easier.
3. Attach the 3M adhesive pad to the dash cam mount.
4. Press the dash cam firmly onto the electrostatic sticker on your windshield, ensuring a clear view of the road and minimal obstruction to your driving view.
5. Adjust the lens angle to cover the desired field of view (160 degrees).

4.3 Power Connection

1. Connect the provided car charger to the dash cam's Type-C port.
2. Plug the other end of the car charger into your vehicle's cigarette lighter socket.
3. Route the power cable neatly along the windshield and dashboard using the pry tool to tuck it under trim panels, ensuring it does not interfere with driving.
4. The dash cam will power on automatically when your vehicle starts and begins recording.

4.4 Wi-Fi and App Connection

The E-YEEGER V100Pro app allows you to view live footage, download recordings, and adjust settings directly from your smartphone.

1. Download the "VeeCar" app from the App Store (iOS) or Google Play Store (Android).
2. Turn on the dash cam.
3. On your smartphone, enable Wi-Fi and connect to the dash cam's Wi-Fi network (SSID typically starts with "V100Pro-XXXXXX"). The default password is usually "12345678".
4. Open the VeeCar app. The app should automatically detect and connect to your dash cam.
5. Note: Ensure your VPN is off and grant local-network permission to the app for proper functionality. CarPlay/Android Auto may briefly interrupt the Wi-Fi connection.

5. Operating Instructions

5.1 Basic Recording

Once powered on, the dash cam automatically begins continuous loop recording. Video files are saved in segments (e.g., 1, 3, or 5 minutes) to the SD card.

5.2 Loop Recording

When the SD card reaches its full capacity, the dash cam will automatically overwrite the oldest unlocked video files to continue recording. This ensures continuous operation without manual SD card management.

5.3 G-Sensor (Emergency Recording)

The built-in G-Sensor detects sudden impacts or collisions. When triggered, it automatically locks the current video segment, preventing it from being overwritten by loop recording. These locked files are stored in a separate folder on the SD card.

5.4 24-Hour Parking Mode

To enable 24-hour parking monitoring, an optional hardwire kit is required (not included). When properly installed, the dash cam will continue to monitor your vehicle even when the ignition is off. It can use time-lapse recording to conserve power and storage space, or trigger event-based recording if an impact is detected.

Note: The hardwire kit is sold separately. Search for ASIN: B0DJVKSF6H on Amazon for compatible kits.

5.5 Night Vision

The V100Pro is equipped with an F/1.8 large aperture and a 6-layer glass lens, which improves light intake by 30%. This enhances video clarity and detail capture in low-light conditions, such as during night driving.

5.6 Voice Prompts

The dash cam provides smart voice prompts for various statuses, such as "Start Recording," "Stop Recording," "This video was locked," and "WiFi Connected." These audio cues help you stay informed about the device's operation without needing to look at the screen.

6. Maintenance

6.1 SD Card Management

• Formatting: It is recommended to format the SD card regularly (e.g., once a month) to ensure optimal performance and prevent data corruption. This can usually be done through the dash cam's settings menu or the connected app. Formatting will erase all data on the card, so back up any important files first.
• Replacement: SD cards have a limited lifespan due to continuous read/write cycles. If you experience recording errors or corrupted files, consider replacing the SD card with a new, high-quality U1+ card.

6.2 Cleaning the Dash Cam

• Use a soft, dry cloth to clean the dash cam's body.
• For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.
• Do not use abrasive cleaners or solvents, as they may damage the device.

7. Troubleshooting

8. Specifications

9. Warranty Information

E-YEEGER products are designed and manufactured to the highest quality standards. For specific warranty details, please refer to the warranty card included in your product packaging or visit the official E-YEEGER website. Keep your purchase receipt as proof of purchase for warranty claims.

10. Customer Support

If you encounter any issues or have questions regarding your E-YEEGER V100Pro Dash Cam, please contact our customer support team. Contact information can typically be found on the E-YEEGER website or within the product packaging.

For the latest information and support resources, please visit the E-YEEGER Store on Amazon.