PHEZEN 7-inch Android 13 Car Stereo for Ford Fusion (2006-2009) - User Manual

Introduction

This manual provides comprehensive instructions for the PHEZEN 7-inch Android 13 Car Stereo, specifically designed for Ford Fusion models manufactured between 2006 and 2009. This system features a 7-inch touchscreen, Android 13 operating system, 4GB RAM, and 64GB ROM. Key functionalities include wireless CarPlay, Android Auto, in-dash GPS navigation, Bluetooth connectivity, mirror link, Wi-Fi, and support for a backup camera. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize your driving experience.

What's in the Box

Verify that all components listed below are included in your package:

• 1 x Android Stereo Radio
• 1 x Power Cable
• 1 x GPS Antenna
• 1 x Rear Camera Input Cable
• 1 x RCA Cable
• 2 x USB Cables
• 1 x AHD Camera (Backup Camera)
• 1 x Microphone
• 1 x Canbus Box
• 1 x Radio Adapter
• 1 x Instruction Manual

Figure 1: Included Components

Figure 2: Rear View with Wiring Harnesses

Setup

1. Installation Overview

The PHEZEN car stereo is designed to fit Ford Fusion models from 2006-2009. Professional installation is recommended. Ensure the vehicle's power is disconnected before beginning installation. Refer to your vehicle's specific disassembly instructions for removing the factory radio.

Figure 3: Ford Fusion Dashboard (Before Installation)

2. Backup Camera Format and Resolution Setup

To configure the backup camera settings:

1. Tap the settings icon on the main screen to open the settings menu.
2. Select "Factory Settings" and enter the password "8888".
3. Navigate to "Protocol Parameter Settings".
4. Select "Reverse video resolution settings".
5. Choose the correct setting based on your camera type:
   • For OEM cameras, select NTSC/PAL.
   • For the included camera, keep the default AHD/25.

3. Bluetooth and ZLINK Connection

This section covers connecting your smartphone via Bluetooth and setting up the ZLINK feature for CarPlay/Android Auto.

1. Bluetooth Connection:
   • On the car stereo, navigate to the Bluetooth settings.
   • On your smartphone, enable Bluetooth and search for available devices.
   • Select "CarBT" from the list of devices on your phone.
   • Enter the PIN "0000" if prompted.
   • Once connected, "phone audio" and "media audio" should appear under paired devices on the car stereo. If not, restart Bluetooth on both devices.
2. ZLINK Connection (for CarPlay/Android Auto):
   • Ensure your phone is connected via Bluetooth.
   • On the car stereo, open the "ZLINK" application.
   • The system will attempt to connect to your phone for CarPlay or Android Auto.
   • If the connection is not successful, proceed to the manual Wi-Fi connection steps below.
3. Manual Wi-Fi Connection (if ZLINK fails):
   • On the car stereo, go to "Android Settings" and then "Network & Internet".
   • Enable "Wi-Fi hotspot" and configure its settings (name and password).
   • On your smartphone, connect to the Wi-Fi hotspot created by the car stereo.
   • Once connected, delete the Wi-Fi history record on the car stereo (if applicable) and then re-open the ZLINK application.

4. Screen Calibration

If the touchscreen response is inaccurate, you may need to calibrate it:

1. Press the screen with five fingers simultaneously to enter calibration mode.
2. Click the corresponding icons (targets) on the screen as they appear to test touch accuracy.
3. Set the corresponding buttons on the left side of the screen (e.g., power, home, back, volume up/down) by tapping them.
4. Confirm the settings to complete calibration.

Operating Instructions

1. CarPlay and Android Auto

The car stereo supports both wireless CarPlay and Android Auto. Connect your smartphone via Bluetooth or Wi-Fi (as described in the Setup section) to access navigation, music, messages, and calls directly from the car stereo's screen. Voice assistants like Siri or Google Assistant are supported for hands-free operation.

Figure 4: CarPlay and Android Auto Interface

2. GPS Navigation

The system includes a built-in GPS module supporting both offline and online maps. You can download offline map data for navigation without an internet connection. For online maps and real-time traffic updates, ensure the device is connected to Wi-Fi.

Figure 5: GPS Navigation and Wi-Fi Hotspot

3. Bluetooth and FM Radio

Utilize Bluetooth for hands-free calling and audio streaming from your smartphone. The system has a built-in microphone and supports an external microphone for clear communication. The integrated FM radio allows you to tune into your favorite stations and receive traffic information.

Figure 6: Bluetooth, FM Radio, and EQ Settings

4. Steering Wheel Control

If your Ford Fusion has original steering wheel buttons, this car stereo supports integration, allowing you to control functions like volume, track changes, and calls directly from your steering wheel for convenience and safety. Refer to the system settings for mapping these controls.

Figure 7: Steering Wheel Control and Reversing Display

5. Reversing Display (Backup Camera)

The included AHD backup camera provides a clear, wide-angle view (170°) of the area behind your vehicle. It features night vision and an IP68 waterproof rating for reliable performance in various conditions. The display automatically switches to the camera view when the vehicle is in reverse gear, aiding in safe parking.

6. Wi-Fi Hotspot

Connect the car stereo to a Wi-Fi network or use its hotspot feature to access online content, download apps from the Play Store, stream videos, and use online navigation services.

7. Audio Equalizer (EQ)

Customize your audio experience with the built-in equalizer. Adjust various sound effects and frequency bands to achieve your preferred sound quality.

8. IPS Touchscreen and Split Screen Functionality

The 7-inch IPS touchscreen offers clear visuals and responsive touch control. The split-screen function allows you to run two applications simultaneously, such as navigation and music playback, enhancing multitasking capabilities.

Figure 8: Rear View Camera, Steering Wheel Control, and Split Screen

Maintenance

To ensure the longevity and optimal performance of your PHEZEN car stereo, follow these maintenance guidelines:

• Cleaning the Screen: Use a soft, lint-free cloth to gently wipe the touchscreen. Avoid abrasive cleaners or solvents that could damage the display.
• Software Updates: Periodically check for software updates to ensure your system has the latest features and security patches. Follow the on-screen instructions for any available updates.
• Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
• Cable Connections: Ensure all cables are securely connected. Loose connections can lead to intermittent functionality.

Troubleshooting

If you encounter issues with your car stereo, refer to the following common troubleshooting steps:

• No Power:
  • Check all power connections to ensure they are secure.
  • Verify the vehicle's fuse related to the car stereo is not blown.
• No Sound:
  • Check speaker connections.
  • Ensure the volume is not muted or set too low.
  • Verify audio output settings in the system menu.
• Bluetooth Connection Issues:
  • Ensure Bluetooth is enabled on both the car stereo and your smartphone.
  • Delete previous pairings on both devices and attempt to reconnect.
  • Refer to "Setup: Bluetooth and ZLINK Connection" section for detailed steps.
• CarPlay/Android Auto Not Connecting:
  • Ensure your phone's operating system is up to date.
  • Try connecting via a different USB cable if using a wired connection.
  • Follow the manual Wi-Fi connection steps in "Setup: Bluetooth and ZLINK Connection".
• Backup Camera Not Displaying:
  • Check the camera's power and video input connections.
  • Verify the "Reverse video resolution settings" as described in the "Setup" section.
• Touchscreen Unresponsive/Inaccurate:
  • Perform a screen calibration as detailed in "Setup: Screen Calibration".
  • Restart the car stereo unit.

If problems persist, contact PHEZEN customer support for further assistance.

Specifications

Warranty and Support

This product comes with a manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or contact PHEZEN customer support. For technical assistance, troubleshooting, or any other inquiries, please reach out to the seller or manufacturer directly.