HiWEEGO Black Rose Building Set with LED Light

Introduction

This instruction manual provides detailed guidance for assembling and operating your HiWEEGO Black Rose Building Set. This 232-piece kit allows you to construct a beautiful black rose bouquet with integrated LED lighting and a protective dust cover, designed for ages 12 and up.

Please Note: These are 3.6MM mini building bricks and are not compatible with major building block brands.

Safety Information

• Small Parts: This set contains small parts which may pose a choking hazard. Keep out of reach of young children.
• Recommended Age: Suitable for ages 12 and up.
• Material: Made from high-quality, environmentally friendly ABS plastic.

What's in the Box

• 232 Mini Building Bricks (Black Roses, Gypsophila, Stems, Leaves, Base components)
• LED Light Strip
• Transparent Dust Cover
• Instruction Manual (this document)

Assembly Instructions

Follow the steps carefully to assemble your Black Rose Building Set. Refer to the included printed instruction booklet for detailed diagrams.

1. Unpack Components: Carefully open the packaging and sort the 232 mini building bricks. It is recommended to organize pieces by type or color to facilitate assembly.
2. Assemble the Roses:
   

   Image: Visual guide for assembling roses in different bloom stages.

   Begin by constructing the individual black roses. The set includes pieces to create three roses, allowing for adjustable petals to represent bud, half-bloomed, or fully blossomed stages. Connect the petals to the central core and then attach the green leaf pieces and stem sections.

   

   Image: Demonstrates how to adjust rose petals and stem positioning.

3. Assemble the Gypsophila: Construct the small white gypsophila flowers and their green stems according to the instructions. These will form the surrounding floral elements.
4. Build the Base: Assemble the black circular base. This base will support the entire floral arrangement and house the LED light strip.
5. Integrate LED Lighting: Carefully wrap the LED light strip around the assembled rose stems and gypsophila, ensuring the lights are distributed evenly to illuminate the bouquet. The light strip's battery pack and switch should be positioned discreetly within the base or as indicated in the manual.
   

   Video: A demonstration of the HiWEEGO Flower Building Set assembly and final appearance.

6. Attach Flowers to Base: Securely attach the assembled roses and gypsophila to the designated points on the base. Ensure all connections are firm.
7. Place Dust Cover: Once the bouquet is fully assembled and the LED lights are in place, carefully position the transparent dust cover over the entire arrangement to protect it from dust and enhance its display.
   

   Image: The completed black rose bouquet with its protective dust cover.

Operating Instructions

To activate the LED lighting feature of your Black Rose Building Set:

1. Locate the small battery pack and ON/OFF switch, typically integrated into the base of the display.
2. Ensure batteries are correctly installed (batteries not included, type usually specified on the battery pack).
3. Flip the switch to the 'ON' position to illuminate the black roses.
4. Flip the switch to the 'OFF' position when not in use to conserve battery life.

Image: The black rose bouquet illuminated by its LED lights.

Maintenance

• Cleaning: Use a soft, dry cloth to gently wipe dust from the building blocks and the transparent dust cover. Avoid abrasive cleaners.
• Dust Protection: Always keep the transparent dust cover in place when the set is not being handled to preserve its appearance and prevent dust accumulation.
• Battery Replacement: If the LED lights dim or stop working, replace the batteries in the light strip's battery pack.

Troubleshooting

• Difficulty with Assembly: The pieces are small (3.6MM) and may require nimble fingers. Refer closely to the step-by-step diagrams in the instruction booklet. If a piece is difficult to connect, ensure it is correctly oriented.
• Fragile Pieces: Some pieces, particularly leaves or small decorative elements, can be thin. Handle them with care during assembly to prevent breakage.
• LED Lights Not Working: Check that the battery pack switch is in the 'ON' position. Verify that batteries are correctly inserted and are not depleted. Replace batteries if necessary.

Specifications

• Product Dimensions: 10 x 10 x 10 inches
• Item Weight: 13.7 ounces
• Item Model Number: SC9980
• Manufacturer: HiWEEGO
• Recommended Age: 12 years and up
• Number of Pieces: 232
• Material: ABS Plastic

Image: Product dimensions and key components overview.

Warranty and Support

Information regarding product warranty and customer support is typically provided with your purchase documentation or can be found on the manufacturer's official website. Please retain your proof of purchase for any warranty claims.