1. Introduction
Thank you for choosing the Futanwei Tempered Glass Screen Protector for your PUBU S69 Smartwatch. This product is designed to provide superior protection for your device's screen against scratches, impacts, and daily wear. This manual will guide you through the installation process and highlight the key features of your new screen protector.
Image: The Futanwei Tempered Glass Screen Protector applied to a PUBU S69 Smartwatch, showing its clear and protective layer.
2. Package Contents
- 3 x Futanwei Tempered Glass Screen Protectors for PUBU S69 Smartwatch
- Wet Wipes
- Dry Wipes
- Dust Absorber Stickers
3. Installation Guide
Follow these steps carefully for a bubble-free and perfectly aligned installation of your screen protector.
Image: A visual guide illustrating the four steps for applying the screen protector to a device.
- Step 1: Clean the Screen
Gently clean your smartwatch screen with the included wet wipe (labeled '1'). Follow this by drying the screen thoroughly with the dry wipe (labeled '2'). Ensure no moisture or residue remains. - Step 2: Remove Dust
Use the provided dust absorber sticker to carefully remove any remaining dust particles from the smartwatch screen. Inspect the screen closely under good lighting to ensure it is completely dust-free. - Step 3: Prepare the Protector
Carefully peel off the protective film from the adhesive side of the tempered glass screen protector. Avoid touching the adhesive surface to prevent fingerprints or dust. - Step 4: Apply the Protector
Align the screen protector precisely with your smartwatch screen. Once aligned, gently press the middle part of the protector with your finger. The adhesive will spread automatically. If any small bubbles remain, gently push them towards the edges with a soft cloth.
4. Product Features
The Futanwei Tempered Glass Screen Protector offers several key features to enhance your smartwatch experience:
- Compatible Model: Specifically designed for the PUBU S69 Smart Watch (1.46 Inches). Please verify your smartwatch model before installation.
- 9H Hardness: Constructed from 9H-hardened tempered glass, providing robust protection against scratches from keys, coins, and other hard objects.
- Oleophobic and Hydrophobic Coating: Features a special coating that repels sweat and oil residue, reducing fingerprints and making the screen easier to clean. It also offers water resistance.
- Ultra HD Clarity & High Transparency: With 99.9% light transmission, the protector maintains the original display quality of your smartwatch, ensuring clear photos and videos without distortion.
- High Touch Sensitivity: Designed to preserve the original touch sensitivity of your smartwatch screen, allowing for smooth and responsive interaction.
- Bubble-Free Application: Engineered for easy, bubble-free installation when following the provided instructions.
Image: A PUBU S69 Smartwatch with the screen protector, emphasizing its compatibility.
Image: A utility knife blade shown near a smartwatch screen, illustrating the screen protector's high hardness and scratch resistance.
Image: A close-up of a smartwatch screen with the ultra-clear tempered glass protector, showcasing its transparency.
Image: A finger interacting with a smartwatch screen, demonstrating the maintained touch sensitivity after protector application.
Image: A smartwatch screen next to an icon representing a bubble-free installation process.
5. Specifications
| Specification | Detail |
|---|---|
| Brand | Futanwei |
| Compatible Model | PUBU S69 Smart Watch (1.46 Inches) |
| Material | Tempered Glass |
| Item Hardness | 9H |
| Special Features | Anti-Scratch, Bubble Free, HD Clarity, Oleophobic, Hydrophobic, High Touch Sensitivity |
| Finish Type | Glossy |
| Product Dimensions | 7.62 x 5.08 x 1.27 cm |
| Item Weight | 9.07 g |
6. Troubleshooting
- Bubbles After Installation: Small bubbles may disappear naturally within 24-48 hours. For larger bubbles, gently lift the nearest edge of the protector and reapply, pushing the bubble out with a soft cloth. Ensure the screen is completely dust-free before reapplication.
- Misalignment: If the protector is misaligned, carefully lift it from one corner and re-align. This is best done immediately after initial placement.
- Dust Under Protector: If dust particles are trapped, carefully lift the protector and use a dust absorber sticker to remove the dust from both the screen and the adhesive side of the protector.
7. Warranty and Support
Futanwei products are designed for quality and durability. While specific warranty details are not provided in this manual, please retain your proof of purchase. For any questions, concerns, or support regarding your Futanwei Tempered Glass Screen Protector, please contact the seller or Futanwei customer service through the platform where you made your purchase.
We are committed to ensuring your satisfaction with our products.
