Important Safety Instructions
Please read and understand all instructions before beginning assembly and use. Failure to follow these instructions may result in injury or damage to the product. Keep this manual for future reference.
- Always assemble the bed frame on a soft, clean surface to prevent scratches.
- Ensure all bolts, screws, and connectors are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not allow children to climb or jump on the bed frame.
- Do not use power tools for assembly unless specifically instructed, as over-tightening can damage components.
- Keep small parts away from children during assembly.
- Maximum weight capacity for the Twin size is 650 lbs. Do not exceed this limit.
Package Contents
Verify that all components listed below are present before starting assembly. If any parts are missing or damaged, please contact VECELO customer support.
- 1 x Bed Frame (Headboard, Side Rails, Footboard)
- 1 x Assembly Kit (Hardware and Tools)
- 1 x Instruction Manual
Image: Headboard component, part of the bed frame package.
Tools Required
The assembly kit includes all necessary tools. No additional tools are typically required.
- Hex Key (provided)
- Wrench (provided)
Setup and Assembly Instructions
Follow these steps carefully for quick and easy assembly. All parts are clearly labeled, and everything needed is packed in one box.
- Unpack and Identify Parts: Lay out all components and hardware on a clean, soft surface. Refer to the parts list to ensure everything is present.
- Attach Headboard Legs: Secure the headboard support legs to the upholstered headboard using the provided bolts and tools. Ensure they are firmly attached.
- Assemble Side Rails: Connect the side rails to the headboard and footboard. Ensure the connections are tight and stable.
- Install Center Support: Place the center support beam and legs into position. Tighten all fasteners.
- Place Wood Slats: Unroll and position the wood slats across the bed frame. The slats are designed with Velcro fastening for easy installation and to prevent noise. Ensure each slat is properly seated and secured.
- Final Check: Double-check all bolts and screws to ensure they are fully tightened. The bed frame should be stable and free from wobbling.
Image: Assembly diagram illustrating the main components and their connection points.
Image: The assembled bed frame showcasing the wooden slat support system.
Operating Instructions
Mattress Placement
This platform bed frame is designed to support a mattress directly, eliminating the need for a box spring. Place your memory foam or spring mattress (recommended height 6-12 inches) directly onto the wooden slats. The design prevents the mattress from sliding.
Adjustable Headboard
The upholstered headboard features an adjustable height mechanism. It can be set between 41.7 inches and 47.7 inches to accommodate various mattress thicknesses and personal preferences.
Image: Visual guide for adjusting the headboard height.
Under-Bed Storage
The bed frame provides approximately 7.9 inches of clearance underneath, offering convenient space for storage bins or other items to help keep your room organized.
Image: Illustration of the under-bed storage space.
Maintenance
Cleaning
- For the velvet upholstered fabric, gently vacuum with an upholstery attachment to remove dust and debris.
- For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner.
- Wipe metal and wood components with a damp cloth and mild detergent if necessary. Dry immediately.
Structural Integrity
- Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability and prevent squeaking.
- Inspect the wooden slats for any signs of damage or wear. Replace any damaged slats to ensure proper mattress support.
Troubleshooting
- Squeaking Noises: Ensure all bolts and screws are tightly fastened. The Velcro fastening slats are designed to minimize noise, but loose connections can cause squeaks. Check the center support legs for stability.
- Instability/Wobbling: Verify that all components are correctly assembled and all fasteners are fully tightened. Ensure the bed frame is on a level surface.
- Mattress Sliding: The wooden slats are designed to prevent mattress movement. If your mattress is sliding, ensure it is properly centered on the frame and that the slats are securely in place.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions (Twin) | 76.6 x 39 x 13.8 inches |
| Item Weight | 53 Pounds |
| Model Number | Upholstered T |
| Manufacturer | VECELO |
| Upholstery Fabric Type | Velvet |
| Number of Slats | 12 |
| Maximum Load Capacity (Twin) | 650 lbs |
| Headboard Adjustable Height Range | 41.7" to 47.7" |
| Under Bed Clearance | 7.9 inches |
| Recommended Mattress Height | 6-12 inches |
Image: Dimensional drawing of the Twin bed frame.
Warranty Information
For specific warranty details regarding your VECELO Twin Upholstered Platform Bed Frame, please refer to the warranty card included with your purchase or contact VECELO customer support directly. Warranty terms typically cover manufacturing defects under normal use.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact VECELO customer support. Contact information can typically be found on the product packaging or on the official VECELO website.
We are committed to providing support for your VECELO product.
