GOLOZA Projection Alarm Clock User Manual

Introduction

Thank you for choosing the GOLOZA Projection Alarm Clock. This manual provides detailed instructions for setting up and operating your new alarm clock. Please read it thoroughly to ensure proper use and to maximize your experience with its features, including the 180° rotatable projector, 3-level brightness dimmer, clear LED display, progressive volume alarm, and 9-minute snooze function.

Package Contents

• GOLOZA Projection Alarm Clock
• AC Adapter (AC100-240V, 50/60Hz)
• Micro USB Cable
• User Manual

Product Features

• Integrated Projector: 180° rotatable arm for optimal positioning, projecting a sharp and clear time image on walls or ceilings (1.64-11.4ft / 0.5-3m distance).
• Large LED Display: Curved screen with 3.4*1.7-inch digits for easy readability, featuring 3 adjustable brightness levels for the main display and separate adjustment for projection.
• USB Charging Port: Built-in 5V/1A USB output interface to charge mobile devices.
• Progressive Buzzer Volume: Alarm sound gradually increases in volume (up to 75dB) and speed.
• 9-Minute Snooze: Large snooze button for extended sleep.
• User-Friendly Controls: Large, clearly marked control buttons for easy operation.
• Built-in Backup Battery: CR2032 button cell battery saves time and alarm settings during power outages (time not displayed, alarm won't sound).
• Stylish Curved Design: Ergonomic curved screen for comfortable viewing and reduced eye strain.

Setup Guide

1. Power Connection

1. Connect the provided AC adapter to the DC IN port on the back of the alarm clock.
2. Plug the AC adapter into a standard wall outlet. The clock will power on and the display will light up.

Image: The GOLOZA Projection Alarm Clock connected to its AC adapter.

2. Battery Backup

The clock includes a pre-installed CR2032 button cell battery for backup. This battery preserves your time and alarm settings in case of a power interruption. Note that the clock is mains-powered only; the display will not show time and the alarm will not sound during a power outage.

Image: Rear view of the GOLOZA clock showing the battery backup compartment.

3. Setting Time and 12/24-Hour Format

1. Press and hold the TIME SET button (usually marked with a clock icon) to enter time setting mode.
2. Use the HOUR and MINUTE buttons to adjust the time.
3. Press the TIME SET button again to confirm.
4. To switch between 12-hour and 24-hour format, short press the 12/24H button (refer to the icons on the clock for exact button). In 12-hour mode, a 'PM' indicator will display for afternoon hours.

Image: Comparison of 12-hour and 24-hour time display on the GOLOZA clock.

4. Display Brightness Adjustment

The main LED display has 3 brightness levels. Press the DIMMER button (often marked with a sun icon) repeatedly to cycle through the brightness settings (High, Medium, Low, Off).

Image: The GOLOZA clock on a nightstand, illustrating its 3 brightness levels for the main display.

5. Projection Setup

1. Turn On/Off Projection: Short press the PROJECTION button (often marked with a projector icon) to turn the projection on or off.
2. Adjust Projection Angle: The projector arm can be rotated 180 degrees to direct the time onto your desired surface (wall or ceiling).
3. Adjust Projection Brightness: Short press the PROJECTION button repeatedly to cycle through projection brightness levels (Low, Medium, High, Off).
4. Flip Projected Image: If the projected numbers appear upside down, long press the PROJECTION button to flip the image 180 degrees.

Image: A visual guide demonstrating the 4-step operation for setting up the projection feature.

Image: A bedroom scene showing the time clearly projected onto the ceiling.

Operating Instructions

1. Setting the Alarm

1. Press and hold the ALARM SET button (usually marked with a bell icon) to enter alarm setting mode.
2. Use the HOUR and MINUTE buttons to set your desired alarm time.
3. Press the ALARM SET button again to confirm.
4. To activate or deactivate the alarm, short press the ALARM ON/OFF button. An alarm icon will appear on the display when activated.

2. Snooze Function

When the alarm sounds, press the large SNOOZE button (usually marked with 'Zz') on top of the clock to temporarily silence the alarm for 9 minutes. The alarm will sound again after 9 minutes. To turn off the alarm completely, press any other button except the snooze button.

Image: A hand pressing the large snooze button on the top of the GOLOZA alarm clock.

3. USB Charging Port

The alarm clock features a 5V/1A USB output port on the side. You can use this port to charge your smartphone or other small electronic devices while the clock is plugged into a power outlet.

Image: A woman charging her smartphone using the convenient USB port on the GOLOZA alarm clock.

Specifications

Image: Detailed dimensions of the GOLOZA Projection Alarm Clock.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the clock's surface. Avoid abrasive cleaners or solvents.
• Power: Ensure the clock is always connected to a stable power source for optimal performance.
• Battery Replacement: If the backup battery needs replacement, use a CR2032 button cell battery.

Troubleshooting

• Display is blank: Ensure the AC adapter is securely plugged into both the clock and a working power outlet. Check the brightness setting of the display.
• Projection is unclear/blurry: Adjust the distance of the clock from the projection surface (wall/ceiling) to be within 1.64-11.4ft (0.5-3m). Ensure the projector lens is clean.
• Projected time is upside down: Long press the PROJECTION button to flip the image 180 degrees.
• Alarm not sounding: Verify that the alarm is activated (alarm icon visible on display) and the alarm time is set correctly. Ensure the clock is connected to main power, as the backup battery does not power the alarm.
• USB charging not working: Ensure the clock is powered by the AC adapter. Check the USB cable and the device being charged.

Official Product Videos

Warranty and Support

GOLOZA offers a 2-year replacement promise for this product. For any support inquiries, troubleshooting assistance, or warranty claims, please refer to the contact information provided on the product packaging or visit the official GOLOZA website. Please retain your proof of purchase for warranty purposes.