1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MOUGOl X99 Dual CPU Motherboard Set. This high-performance motherboard is designed for demanding computing tasks, including gaming, content creation, and server applications, leveraging the power of dual Intel Xeon E5 2680 V4 processors and DDR4 memory.
Please read this manual thoroughly before proceeding with installation to ensure proper setup and to prevent damage to your components.
2. Features
- Dual LGA2011-3 Sockets: Supports two Intel Xeon E5 2680 V4 processors for exceptional multi-core performance.
- High-Performance DDR4 Memory: Equipped with multiple DDR4 slots, supporting up to 64GB (4x16GB) for smooth operation and responsiveness.
- M.2 NVMe Storage Support: Provides fast data transfer rates and enhanced storage options with M.2 NVMe slots.
- Robust Power Delivery: Designed for stability and reliability under heavy workloads.
- PCIe Expansion Slots: Multiple PCIe slots for graphics cards and other expansion cards.
3. Package Contents
Verify that all items are present and in good condition. If any item is missing or damaged, contact your retailer.
- MOUGOl X99 Dual CPU Motherboard
- Two (2) Intel Xeon E5 2680 V4 Processors
- I/O Shield
- SATA Cables (quantity may vary)
- User Manual (this document)
Note: RAM modules (DDR4) are not included in this specific 'Motherboard+CPU' package and must be purchased separately.
4. Setup Guide
4.1 Safety Precautions
- Always disconnect the power supply from the wall outlet before installing or removing any components.
- Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.
- Handle components by their edges; avoid touching pins or circuitry.
- Ensure proper ventilation in your PC case.
4.2 Motherboard Overview
Figure 1: Top-down view of the MOUGOl X99 Dual CPU Motherboard, highlighting the dual LGA2011-3 sockets, DDR4 memory slots, PCIe slots, and M.2 NVMe interfaces.
4.3 Component Installation
- CPU Installation:
- Carefully open the CPU socket retention mechanism.
- Align the triangular mark on the Intel Xeon E5 2680 V4 processor with the mark on the socket.
- Gently place the CPU into the socket without forcing it.
- Close the retention mechanism to secure the CPU. Repeat for the second CPU.
- Apply a thin, even layer of thermal paste to the top of each CPU.
- Install compatible CPU coolers according to their respective manuals.
- RAM Installation:
- Open the clips at both ends of the DDR4 memory slots.
- Align the notch on the DDR4 memory module with the key in the slot.
- Press down firmly on both ends of the memory module until the clips snap into place. Refer to your motherboard manual for recommended dual-channel or quad-channel configurations.
- M.2 NVMe SSD Installation:
- Locate the M.2 slot(s) on the motherboard.
- Insert the M.2 NVMe SSD into the slot at an angle.
- Gently push down the SSD and secure it with the provided screw.
- Graphics Card (GPU) Installation:
- Locate the primary PCIe x16 slot.
- Remove the corresponding expansion slot cover from your PC case.
- Align the graphics card with the slot and press down firmly until it is seated.
- Secure the card with a screw to the PC case.
- Connect any necessary PCIe power cables from your power supply to the graphics card.
- Power Supply Connections:
- Connect the 24-pin ATX power connector from your power supply to the motherboard.
- Connect the 8-pin (or 4+4 pin) EPS 12V CPU power connectors to the motherboard (two for dual CPUs).
- Connect SATA power cables to your storage devices.
- Front Panel Connectors:
- Connect the power button, reset button, HDD LED, and power LED cables from your PC case to the corresponding pins on the motherboard's front panel header. Refer to the motherboard's silkscreen labels for correct orientation.
- Connect USB 2.0, USB 3.0, and audio headers from your case to the motherboard.
Figure 2: Angled view of the MOUGOl X99 Dual CPU Motherboard, showing the rear I/O panel, various headers, and SATA ports.
5. Operating Instructions
5.1 Initial Boot and BIOS/UEFI Setup
- After all components are installed and connected, connect the power cable to the power supply and turn on the power switch.
- Press the power button on your PC case.
- During POST (Power-On Self-Test), repeatedly press the DEL or F2 key (or as indicated on screen) to enter the BIOS/UEFI setup utility.
- In the BIOS/UEFI, verify that all installed components (CPUs, RAM, storage) are detected correctly.
- Configure boot order to prioritize your operating system installation media (USB drive or DVD).
- Save changes and exit the BIOS/UEFI.
5.2 Operating System and Driver Installation
- Boot from your operating system installation media.
- Follow the on-screen prompts to install your preferred operating system.
- Once the operating system is installed, install all necessary drivers. These typically include chipset drivers, LAN drivers, audio drivers, and any specific M.2 NVMe drivers. Drivers can usually be found on the manufacturer's website or an included driver disc (if applicable).
6. Maintenance
6.1 Cleaning
- Regularly clean dust from your PC case and components using compressed air.
- Ensure fans (CPU, case, GPU) are free from obstructions.
- Never use liquid cleaners directly on motherboard components.
6.2 Firmware and Driver Updates
- Periodically check the manufacturer's website for updated BIOS/UEFI firmware and drivers.
- Updating firmware can improve stability, performance, and compatibility. Follow the manufacturer's instructions carefully when updating BIOS/UEFI.
7. Troubleshooting
This section addresses common issues you might encounter. For more complex problems, consult professional technical support.
7.1 No Power / No Boot
- Check Power Connections: Ensure the 24-pin ATX and 8-pin EPS 12V CPU power cables are securely connected to the motherboard and power supply.
- Power Supply Switch: Verify the power supply's main switch is in the 'ON' position.
- Front Panel Connections: Double-check that the power button cable is correctly connected to the motherboard's front panel header.
- Test Power Supply: If possible, test the power supply with another system or use a power supply tester.
7.2 No Display
- Monitor Connection: Ensure your monitor is properly connected to the graphics card (not the motherboard's I/O if no integrated graphics are present) and is powered on.
- Graphics Card Seating: Re-seat the graphics card in its PCIe slot.
- PCIe Power: Confirm all necessary PCIe power cables are connected to the graphics card.
- RAM Seating: Incorrectly seated RAM can prevent display output. Re-seat all RAM modules.
7.3 System Instability / Crashes
- Overheating: Check CPU and GPU temperatures. Ensure CPU coolers are properly installed and fans are functioning.
- RAM Issues: Run a memory diagnostic tool (e.g., MemTest86) to check for faulty RAM. Try running with one RAM stick at a time.
- Driver Issues: Ensure all drivers are up-to-date and correctly installed.
- Power Supply: An insufficient or failing power supply can cause instability.
8. Specifications
| Model Number | SVCBYUYTY-MOTHERBOARD+CPU |
| CPU Socket | Dual LGA2011-3 |
| Supported CPUs | Intel Xeon E5 2680 V4 (included) and other compatible LGA2011-3 processors |
| Memory Type | DDR4 (specific speeds and capacities depend on modules used) |
| Storage Interfaces | M.2 NVMe, SATA |
| Expansion Slots | PCIe x16, PCIe x4 (specific configuration may vary) |
| Package Dimensions | 0.39 x 0.39 x 0.39 inches |
| Item Weight | 12.77 ounces |
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided by your retailer or contact the manufacturer directly. Keep your proof of purchase for warranty claims.
Online resources, including updated drivers and FAQs, may be available on the manufacturer's official website.
