1. Introduction
Thank you for choosing the DREAME Aqua10 Ultra Roller Robot Vacuum. This advanced cleaning device is designed to provide efficient and thorough floor cleaning with its innovative mopping system and HyperStream Detangling DuoBrush. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your robot vacuum. Please read it carefully before use and retain it for future reference.
2. Important Safety Information
To reduce the risk of injury or damage, read and follow all safety precautions when setting up, using, and maintaining your robot vacuum. Failure to do so may result in electric shock, fire, or serious injury.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Do not use the robot vacuum in wet environments or near water sources.
- Ensure the charging base is placed on a level surface against a wall, with adequate clear space around it.
- Before cleaning, remove loose items, power cords, small objects, and fragile items from the floor.
- Do not use the robot vacuum to pick up large debris, liquids, burning or smoking materials, or sharp objects.
- Only use the original power adapter and charging base provided by DREAME.
- Turn off the robot vacuum and unplug the charging base before performing any maintenance or cleaning.
- Do not attempt to repair or modify the robot vacuum yourself. Contact authorized service personnel for assistance.
3. Package Contents
Verify that all components are present and in good condition upon unpacking. If any items are missing or damaged, please contact customer support.
- DREAME Aqua10 Ultra Roller Robot Vacuum (1 unit)
- HyperStream Detangling DuoBrush (1 unit, pre-installed or separate)
- All-in-One Base Station (1 unit)
- Power Cord (1 unit)
- Side Brush (1 unit)
- Cleaning Tool (1 unit)
- User Manual (This document)
Image: The DREAME Aqua10 Ultra Roller Robot Vacuum docked in its All-in-One Base Station, with the HyperStream Detangling DuoBrush visible on the side.
4. Setup
4.1 Unpacking and Placement
- Remove all packaging materials and protective films from the robot vacuum and the base station.
- Place the All-in-One Base Station on a hard, level surface against a wall. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the base station for optimal navigation.
- Connect the power cord to the base station and plug it into a wall outlet.
4.2 Initial Charging
Place the robot vacuum onto the charging pins of the base station. Ensure the robot is properly aligned. The robot will automatically power on and begin charging. For first-time use, fully charge the robot before operation (approximately 6 hours).
4.3 App Connection
For full functionality and smart control, download the DREAME Home app from your mobile device's app store. Follow the in-app instructions to connect your robot vacuum to your home Wi-Fi network.
Image: The DREAME Aqua10 Ultra Robot Vacuum and its base station, with a smartphone displaying the DREAME app interface, illustrating app connectivity.
5. Operation
5.1 Starting a Cleaning Cycle
- Manual Start: Press the power button on the robot vacuum once to start a cleaning cycle.
- App Control: Use the DREAME Home app to start, pause, or stop cleaning, select cleaning modes, set schedules, and define no-go zones.
5.2 AquaRoll Mopping Technology
The Aqua10 Ultra features an innovative mopping system that continuously sprays clean water onto the roller mop and collects dirty water, ensuring your floors are always cleaned with fresh water. This system, combined with the 260mm roller length and Clever FluffRoll Tech Design, provides effective wet cleaning.
Image: Diagram illustrating the DREAME AquaRoll Mopping Technology, showing continuous clean water spray, dirty water collection, and the 260mm roller length for effective mopping.
5.3 Carpet Protection (AutoSeal Roller Guard)
When the robot detects a carpet, the AutoSeal roller guard automatically closes, and the chassis lifts by 0.55 inches (1.4 cm). This prevents the roller mop from dampening carpets and avoids odors, ensuring dry vacuuming on carpets and wet mopping on hard floors without manual intervention.
Image: The DREAME Aqua10 Ultra demonstrating its AutoSeal Roller Guard feature, showing the roller guard closing and the chassis lifting when transitioning from hard floor to carpet.
5.4 Obstacle Avoidance (FlexRise Air Suspension)
The FlexRise air suspension system allows the robot to tackle obstacles up to 3.15 inches (8 cm) high, such as thresholds, rugs, and floor transitions, making it suitable for homes with various floor types.
5.5 HyperStream Detangling DuoBrush
The included HyperStream Detangling DuoBrush is designed to minimize hair tangles, ensuring consistent cleaning performance and reducing maintenance frequency. This brush is reusable and washable.
Image: The DREAME Aqua10 Ultra operating with the HyperStream Detangling DuoBrush, illustrating its effectiveness in preventing hair tangles during cleaning.
Image: A close-up view of the two HyperStream Detangling DuoBrushes, highlighting their design for effective hair management.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your DREAME Aqua10 Ultra. Always turn off the robot and unplug the base station before performing maintenance.
6.1 All-in-One Base Station Functions
The base station provides automated maintenance features:
- Dirt Detection for Re-washing & Re-mopping: The base station detects dirt levels on the mop and initiates re-washing or re-mopping as needed.
- Roller Self-Cleaning: The base station automatically cleans the roller brush after each cleaning cycle.
- 158°F Hot Air Roller Drying: Hot air drying prevents mildew and odors on the roller mop.
- Dust Bag Auto-Drying: Ensures the dust bag remains dry.
- 100-Day Hands-Free Emptying: The base station automatically empties the robot's dustbin into a larger dust bag, providing up to 100 days of hands-free operation.
- Auto Water Tank Refilling: The base station refills the robot's clean water tank as needed.
Image: Visual representation of the DREAME Aqua10 Ultra's All-in-One Base Station capabilities, including dirt detection, roller self-cleaning, hot air drying, dust bag auto-drying, hands-free emptying, and auto water tank refilling.
6.2 Cleaning the HyperStream Detangling DuoBrush
While the DuoBrush is designed to detangle, occasional manual cleaning may be required, especially if long hair or fibers accumulate. The brushes are reusable and washable.
- Remove the DuoBrush from the robot.
- Use the provided cleaning tool to cut and remove any tangled hair or debris.
- Rinse the brush under running water.
- Allow the brush to air dry completely before re-installing it into the robot.
Image: The HyperStream Detangling DuoBrush shown being rinsed under water, emphasizing its reusable and washable nature for easy maintenance.
6.3 Cleaning Sensors and Wheels
Periodically wipe the robot's sensors and charging contacts with a clean, dry cloth. Check the wheels for any trapped debris and remove them if necessary.
6.4 Replacing Filters
The robot uses cloth and foam filters. Refer to the DREAME Home app or the product's support website for recommended replacement intervals and instructions on how to replace them.
7. Troubleshooting
If you encounter issues with your DREAME Aqua10 Ultra, refer to the table below for common problems and solutions. For more detailed troubleshooting, consult the DREAME Home app or the official DREAME support website.
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not power on. | Low battery; not properly docked. | Ensure robot is fully charged on the base station. Check power connection to base station. |
| Robot cannot return to base station. | Base station obstructed; too far from base. | Clear obstacles around the base station. Ensure base station is in an accessible area. |
| Poor cleaning performance. | Brushes tangled; filters clogged; water tanks empty. | Clean the HyperStream Detangling DuoBrush. Clean or replace filters. Refill clean water tank. |
| Robot gets stuck frequently. | Small objects on floor; uneven surfaces. | Remove loose cables, toys, and other small items. Use the app to set no-go zones if needed. |
| App connection issues. | Incorrect Wi-Fi password; router issues; robot too far from router. | Verify Wi-Fi password. Restart router and robot. Ensure robot is within Wi-Fi range. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | DREAME |
| Model | Aqua10 Ultra |
| Filter Type | Cloth, Foam |
| Power Source | Battery Powered |
| Control Method | App |
| Form Factor | Round |
| ASIN | B0FRSFZ1ND |
| First Available | August 26, 2025 |
9. Warranty & Support
DREAME products come with a limited warranty. For detailed warranty information, including terms and conditions, please refer to the warranty card included with your product or visit the official DREAME website. For technical support, troubleshooting assistance, or to purchase replacement parts, please contact DREAME customer service through the DREAME Home app or their official support channels.
Official DREAME Website: www.dreame-tech.com
