Folgtek A106 Trail Camera Instruction Manual

1. Product Overview

The Folgtek A106 Trail Camera is a high-performance device designed for wildlife observation, home security, farm monitoring, and hunting. It captures ultra-clear 64MP photos and 4K videos with a 120° wide-angle lens, ensuring broad coverage and detailed monitoring in various lighting conditions. Key features include a super-fast 0.1s trigger speed, three-zone detection, and HD night vision up to 100 feet using 36 no-glow 940nm infrared LEDs. Its IP66-rated waterproof and dustproof housing ensures reliable performance in harsh outdoor environments.

Image 1.1: The Folgtek A106 Trail Camera captures high-resolution photos and videos, displaying essential data like temperature and time.

Image 1.2: The camera features a 120° wide-angle lens and a rapid 0.1s trigger speed with a three-zone detection system.

Image 1.3: The IP66-rated housing provides protection against various weather conditions and dust.

2. What's in the Box

Please check the package contents upon unboxing:

• Folgtek A106 Trail Camera
• Instruction Manual
• Mounting Strap
• USB Cable

Image 2.1: Included items in the Folgtek A106 Trail Camera package.

3. Components Identification

Familiarize yourself with the main components of your Folgtek A106 Trail Camera:

Image 3.1: Front and side view of the camera with key components labeled.

• LCD Screen: Displays menu options, settings, and playback.
• Keypad: Used for navigating menus and confirming selections.
• SD Card Slot: Insert an SD card (up to 128GB, not included) for storing photos and videos.
• Mini USB Port: Connects the camera to a computer for data transfer or external power.
• DC Port (12V/1A): For connecting an external power adapter.
• Tripod Screw Hole: Standard UNC 1/4-20 thread for mounting on a tripod or other accessories.
• Battery Slot: Holds the required batteries (not included).

4. Setup

4.1 Battery Installation

1. Open the camera's housing latches and gently open the camera.
2. Locate the battery slot.
3. Insert the required batteries (e.g., 8 AA batteries, not included) according to the polarity markings (+/-).
4. Close the battery slot cover securely.

4.2 SD Card Installation

1. With the camera powered off, locate the SD card slot.
2. Insert a compatible SD card (up to 128GB, not included) into the slot with the metal contacts facing down until it clicks into place.
3. To remove, push the SD card in again until it clicks, then release. It will spring out.

4.3 Mounting the Camera

The camera can be mounted using the included strap or a tripod:

• Strap Mounting: Thread the provided mounting strap through the slots on the back of the camera. Secure the camera to a tree or pole at the desired height and angle.
• Tripod Mounting: Screw the camera onto a standard tripod or mounting bracket using the tripod screw hole at the bottom.

4.4 Initial Power On

1. After installing batteries and an SD card, switch the camera to the 'SETUP' position.
2. The LCD screen will turn on, allowing you to configure settings.

5. Operating Instructions

5.1 Camera Modes

The Folgtek A106 Trail Camera typically operates in three main modes:

• OFF: Camera is powered off.
• SETUP: Allows access to the menu for configuring settings and viewing captured media.
• ON: Camera is active and will capture photos/videos based on motion detection and configured settings.

5.2 Menu Navigation

Use the keypad buttons to navigate the menu on the LCD screen:

• UP/DOWN: Scroll through menu options.
• LEFT/RIGHT: Change values or select sub-options.
• OK: Confirm selection or enter a sub-menu.
• MENU: Exit current menu or return to the previous screen.

5.3 Basic Settings Configuration

In 'SETUP' mode, access the menu to adjust the following common settings:

• Mode: Select Photo, Video, or Photo+Video.
• Photo Resolution: Set image quality (e.g., 64MP, 32MP).
• Video Resolution: Set video quality (e.g., 4K, 1080P).
• PIR Sensitivity: Adjust motion sensor sensitivity (Low, Medium, High).
• Trigger Interval: Set the delay between detections.
• Time Stamp: Enable/disable date, time, and temperature display on media.
• Date & Time: Set the current date and time.
• Format SD Card: Erase all data on the SD card. (Caution: This will delete all files.)

5.4 Capturing Media

Once settings are configured:

1. Switch the camera from 'SETUP' to 'ON'.
2. The camera will enter monitoring mode. The indicator light may flash for a few seconds before turning off, indicating it is ready.
3. The camera will automatically capture photos or videos when motion is detected within its 120° wide-angle and three-zone detection range.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the camera lens and PIR sensors. Avoid abrasive cleaners.
• Battery Replacement: Replace batteries when the low battery indicator appears on the screen or when performance degrades. Always use fresh batteries of the same type.
• SD Card Management: Regularly check the SD card capacity. Format the SD card periodically to maintain optimal performance and prevent data corruption.
• Waterproof Seal: Ensure the camera's housing latches are securely closed to maintain its IP66 waterproof rating, especially after accessing the interior.
• Storage: When not in use for extended periods, remove batteries and store the camera in a cool, dry place.

7. Troubleshooting

7.1 Camera Not Turning On

• Check if batteries are inserted correctly with correct polarity.
• Ensure batteries have sufficient charge. Replace with new ones if necessary.
• Verify the power switch is in the 'SETUP' or 'ON' position.

7.2 Poor Image/Video Quality

• Clean the camera lens to remove dirt or smudges.
• Ensure the camera is set to the desired photo/video resolution in the settings.
• For night vision issues, ensure there are no obstructions in front of the infrared LEDs.

7.3 No Motion Detection

• Check PIR sensitivity settings; increase if necessary.
• Ensure the camera's PIR sensors are not obstructed.
• Verify the camera is in 'ON' mode.
• Test the detection range by walking in front of the camera.

7.4 SD Card Errors

• Ensure the SD card is properly inserted.
• Format the SD card using the camera's menu.
• Try a different, known-good SD card (up to 128GB).

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Folgtek website. Keep your purchase receipt as proof of purchase.