HONOR Choice Earbuds Clip User Manual

Introduction

Thank you for choosing the HONOR Choice Earbuds Clip. These open-ear wireless headphones are designed for comfortable listening with advanced features like Bluetooth 5.2 connectivity, AI call noise cancellation, and a long-lasting battery. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience.

Package Contents

• HONOR Choice Earbuds Clip (Left and Right Earbuds)
• Wireless Charging Case
• USB Charging Cable
• User Manual

Image: The HONOR Choice Earbuds Clip, showing both earbuds inside their open charging case.

Product Overview

The HONOR Choice Earbuds Clip features an innovative design and advanced technology for a superior audio experience.

Key Features:

• Titanium Arch Bridge Design: High-performance titanium alloy material covered with scratch and corrosion-resistant PC material for strength and lightweight comfort.
• Asymmetrical Open-Ear Design: Adapts naturally to the ear cup, combined with two rear vents for direct sound waves and reduced sound leakage.
• Dual Magnetic Driver: 10.8 mm driver with PEEK + Pen titanium-coated membrane for stronger bass, lower distortion, and higher sensitivity.
• Extended Battery Life: Up to 7 hours of single-song playback, extendable to 36 hours with the charging case.
• AI Call Noise Cancellation (DNN): Dual highly sensitive microphones intelligently filter ambient noise for crystal clear calls.
• Bluetooth 5.2 Connectivity: Ensures stable and efficient wireless connection.
• IP54 Water Resistance: Provides protection against dust and splashes.

Image: Diagram highlighting the Titanium Alloy Arch Design of the earbuds, emphasizing comfort and aesthetics.

Image: Exploded view diagram of the dual-magnet driver unit, illustrating its components for enhanced audio performance.

Setup

1. Charging the Earbuds and Case

Before first use, fully charge the earbuds and the charging case.

1. Place both earbuds into the charging case.
2. Connect the charging case to a power source using a USB charging cable.
3. The indicator light on the charging case will show the charging status. A full charge provides up to 36 hours of total listening time.

Image: Graphic illustrating the 36-hour extended battery life of the earbuds with their charging case.

2. Pairing with a Device

Follow these steps to pair your HONOR Choice Earbuds Clip with your Bluetooth-enabled device.

1. Ensure the earbuds are in the charging case and the case lid is open.
2. On your device (e.g., smartphone, laptop), go to the Bluetooth settings.
3. Search for available devices and select "HONOR Choice Earbuds Clip" from the list.
4. Once connected, you will hear an audio prompt, and the earbuds will be ready for use.

3. Wearing the Earbuds

The open-ear clip design ensures a comfortable and secure fit.

• Gently clip each earbud onto your ear, ensuring the sound outlet is positioned towards your ear canal.
• Adjust for a comfortable and stable fit. The asymmetrical curve is designed to adapt naturally to the ear cup.

Image: A woman demonstrating the proper way to wear the HONOR Choice Earbuds Clip, highlighting its open clip design and natural fit.

Operating Instructions

Touch Controls

The earbuds feature intuitive touch controls for managing audio playback and calls.

• Play/Pause: Single tap on either earbud.
• Next Track: Double tap on the right earbud.
• Previous Track: Double tap on the left earbud.
• Answer/End Call: Single tap on either earbud.
• Reject Call: Press and hold on either earbud for 2 seconds.
• Activate Voice Assistant: Triple tap on either earbud.

AI Call Noise Cancellation

The earbuds utilize dual microphones and an AI multi-channel call noise cancellation algorithm (DNN) to reduce ambient noise during calls, ensuring your voice is clear to the recipient. This feature is automatically active during phone calls.

Image: Diagram illustrating the primary and secondary microphones used for AI Enhanced Noise Cancellation (ENC) during calls.

Dual Device Connection

The HONOR Choice Earbuds Clip supports simultaneous connection to two devices. This allows for seamless switching between audio sources, such as listening to music on a laptop and answering a call on a smartphone.

• Pair the earbuds with your first device.
• Disconnect from the first device (or put earbuds back in case and re-enter pairing mode if needed).
• Pair the earbuds with your second device.
• The earbuds will now remember both devices and automatically switch between them based on active audio or call.

Image: Illustration showing the earbuds connected to both a smartphone and a tablet, demonstrating the dual device connection feature with automatic switching.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your earbuds.

• Cleaning: Use a soft, dry, lint-free cloth to clean the earbuds and charging case. Avoid using abrasive materials or harsh chemicals.
• Water Resistance: The earbuds are IP54 rated, meaning they are protected against dust ingress and splashing water from any direction. Do not submerge them in water or expose them to heavy rain. Dry them thoroughly if they get wet.
• Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged. Store in a cool, dry place away from extreme temperatures.
• Charging Contacts: Periodically check and clean the charging contacts on both the earbuds and inside the case to ensure proper charging.

Troubleshooting

If you encounter issues with your earbuds, refer to the following common solutions.

Specifications

Detailed technical specifications for the HONOR Choice Earbuds Clip.

Warranty and Support

For warranty information and customer support, please refer to the official HONOR website or contact your local HONOR service center. Keep your proof of purchase for warranty claims.

• Online Support: Visit the official HONOR support website for FAQs, drivers, and software updates.
• Contact Information: Refer to the product packaging or official website for customer service contact details.