OKD 70" Mid Century Modern Fluted TV Stand Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your OKD 70" Mid Century Modern Fluted TV Stand. Please read all instructions carefully before beginning assembly and retain this manual for future reference. This TV stand is designed to accommodate televisions up to 75 inches, offering both open and concealed storage solutions.

Safety Information

• Tip-Over Prevention: Always secure the TV stand to the wall using appropriate anti-tip hardware (not included) to prevent tip-overs, especially in households with children or pets.
• Sharp Edges: Exercise caution when handling components during assembly to avoid injury from sharp edges.
• Small Parts: Keep all small parts and hardware out of reach of children during assembly to prevent choking hazards.
• Weight Capacity: Do not overload the shelves or the top surface. The top surface supports up to 150 lbs, and internal shelves support up to 30 lbs. Overloading can lead to structural damage or collapse.
• Placement: Place the TV stand on a level, stable surface to ensure stability.
• Electrical Cords: Route all electrical cords safely to prevent tripping hazards and damage to the cords.

Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Top Panel
• Bottom Panel
• Side Panels (Left & Right)
• Center Divider Panels
• Adjustable Shelves
• Back Panels
• Cabinet Doors (with soft-close hinges)
• Legs
• Hardware Pack (screws, dowels, cam locks, shelf pins, handles, etc.)

Image: Overview of the TV stand components.

Assembly Instructions

Assembly is required for this product. It is recommended to have two people for assembly. Please follow the step-by-step instructions provided in the included assembly guide. A Phillips head screwdriver and a hammer (not included) may be required.

1. Prepare Workspace: Clear a spacious, clean, and level area for assembly. Lay down a blanket or cardboard to protect the furniture pieces and your floor.
2. Identify Parts: Unpack all components and hardware. Refer to the parts list in your separate assembly guide to identify each piece.
3. Assemble Base: Attach the legs to the bottom panel according to the assembly guide.
4. Construct Frame: Connect the side panels and center dividers to the bottom panel using the provided hardware.
5. Install Shelves: Insert shelf pins into the desired holes for the adjustable shelves. Place the shelves onto the pins.
6. Attach Top Panel: Secure the top panel to the assembled frame.
7. Install Back Panels: Fasten the back panels to the rear of the unit.
8. Attach Doors: Mount the soft-close cabinet doors using the provided hinges. Adjust hinges as needed for proper alignment.
9. Install Handles: Attach the handles to the cabinet doors.
10. Final Check: Ensure all connections are secure and the unit is stable.

Image: Detail of the TV stand's design elements, including curved profile, fluted doors, and tapered legs.

Operating Instructions

Adjustable Shelves

The TV stand features adjustable shelves within the open media compartment and behind the cabinet doors. To adjust a shelf:

1. Remove all items from the shelf.
2. Carefully lift the shelf to remove it from the shelf pins.
3. Relocate the shelf pins to the desired height in the pre-drilled holes. Ensure all four pins are at the same level.
4. Place the shelf back onto the pins, ensuring it is stable and level.

Image: Adjustable shelving behind a soft-close door, showing storage capacity.

Soft-Close Doors

The cabinet doors are equipped with soft-close hinges, designed to prevent slamming and reduce wear. Simply push the door gently to close, and the mechanism will engage to ensure a quiet and smooth closure.

Image: Top view highlighting the spacious surface and open shelf area.

Maintenance

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the engineered wood finish.
• Spills: Immediately wipe up any spills to prevent moisture damage.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.
• Heat: Do not place hot items directly on the surface. Use coasters or protective pads.
• Hardware: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.

Troubleshooting

Issue: Stand is wobbly or unstable.

Solution: Ensure all screws and fasteners are securely tightened. Verify the stand is placed on a level surface. If necessary, use shims under the legs to stabilize it. Re-check assembly steps to ensure all parts are correctly installed.

Issue: Cabinet doors are misaligned or do not close smoothly.

Solution: The soft-close hinges are adjustable. Refer to your assembly guide for specific instructions on how to adjust the hinges to align the doors properly. Ensure no items inside the cabinet are obstructing the door's path.

Issue: Damage during shipping or missing parts.

Solution: Do not proceed with assembly. Contact OKD customer support immediately with your purchase details and a description of the issue. Provide photos if possible.

Specifications

Image: Dimensional diagram of the TV stand, including width, depth, height, and weight capacities.

Product Overview Video

Warranty and Customer Support

For warranty information, replacement parts, or any questions regarding your OKD TV stand, please contact OKD customer support. Refer to your purchase documentation for specific warranty terms and contact details. You can also visit the official OKD store on Amazon for more information: OKD Store.