Introduction
Thank you for purchasing the COSYLUX LED Modern Floor Lamp. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new lamp. Please read this manual thoroughly before use and retain it for future reference.
Image: The COSYLUX LED Modern Floor Lamp, featuring five illuminated rings, positioned in a contemporary living room next to a sofa and coffee table.
Safety Instructions
To ensure safe operation, please observe the following precautions:
- Always disconnect the power supply before cleaning or performing any maintenance.
- Do not operate the lamp with a damaged cord or plug. If damaged, contact qualified service personnel.
- This lamp is designed for indoor use only. Do not expose to water or high humidity.
- Keep the lamp away from heat sources and direct sunlight to prevent damage to components.
- Ensure the lamp is placed on a stable, level surface to prevent tipping.
- Do not attempt to modify or disassemble the lamp beyond the instructions provided in this manual.
- The LED light source is not replaceable. If the LED light source fails, the entire luminaire shall be replaced.
Package Contents
Verify that all components are present in the package:
- Adapter
- Bulb (Integrated LED)
- On-Off Switch (Integrated Foot Switch)
- Power Cable
- User Manual (This document)
- Lamp Sections (Base, Middle, Top Rings)
Assembly Instructions
Follow these steps to assemble your COSYLUX LED Modern Floor Lamp:
Step 1: Unpacking
Carefully remove all components from the packaging. Place them on a soft, clean surface to prevent scratches.
Step 2: Base Assembly
Identify the lamp base and the lowest lamp section. Align the connectors and gently screw the first lamp section into the base until secure. Ensure the power cord exits through the designated opening in the base.
Image: A detailed view of the lamp's polished chrome base, showing the secure connection points for the lamp sections and the integrated wiring.
Step 3: Connecting Lamp Sections
Continue to connect the remaining lamp sections (middle and top rings) by aligning the plug-in connectors and screwing them together. The lamp is designed with a 2-in-1 functionality, allowing the top two LED rings to be detached and used as a tall table lamp. If you wish to use it as a floor lamp, connect all five rings. If converting to a table lamp, only connect the bottom three rings to the base.
Step 4: Power Connection
Once fully assembled, plug the power cable into a standard 120V AC electrical outlet. Ensure the foot switch is easily accessible.
Image: The fully assembled COSYLUX LED Modern Floor Lamp, illustrating its sleek design and providing a visual context for its technical specifications.
Operating Instructions
Power On/Off and Dimming
The lamp is operated using the integrated foot switch located on the power cord. This lamp features a 3-way dimmable function:
- First Tap: Turns the lamp ON to 100% brightness (3260 Lumens).
- Second Tap: Dims the lamp to 50% brightness.
- Third Tap: Dims the lamp to 25% brightness.
- Fourth Tap: Turns the lamp OFF.
Image: A close-up view of the circular foot switch, used to control the lamp's power and dimming functions.
Image: A visual representation of the lamp's three dimming levels: 25% for comfort, 50% for natural light, and 100% for full brightness.
2-in-1 Functionality (Floor Lamp / Table Lamp)
This lamp offers versatile usage as either a full-height floor lamp or a shorter table lamp. To convert:
- To use as a Floor Lamp: Ensure all five LED ring sections are connected to the base.
- To use as a Table Lamp: Disconnect the top two LED ring sections from the main body. The remaining three sections connected to the base will function as a table lamp with a height of approximately 28 inches.
Maintenance
Proper maintenance ensures the longevity and performance of your lamp:
- Cleaning: Before cleaning, ensure the lamp is unplugged. Use a soft, dry cloth to wipe down the lamp's surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- LED Care: The integrated LED light source does not require replacement. Avoid touching the LED rings directly with bare hands to prevent smudges.
- Cord Inspection: Periodically inspect the power cord and plug for any signs of damage. If damage is found, discontinue use and contact customer support.
Troubleshooting
If you encounter any issues with your lamp, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply. | Ensure the power cord is securely plugged into a working outlet. Check if the outlet has power. |
| Lamp flickers or dims unexpectedly. | Loose connection or power fluctuation. | Check all lamp section connections. Try plugging into a different outlet. |
| Foot switch is unresponsive. | Switch malfunction or power issue. | Ensure power is supplied to the lamp. If the issue persists, contact customer support. |
| Lamp sections are loose. | Sections not fully tightened. | Gently tighten all screw connections between lamp sections. |
Specifications
Key technical specifications for the COSYLUX LED Modern Floor Lamp:
| Feature | Specification |
|---|---|
| Model Number | B0FQTD3KNG |
| Product Dimensions | 10.3"D x 10.3"W x 46"H |
| Item Weight | 6.2 Pounds |
| Light Source Type | Integrated LED |
| Number of Light Sources | 5 (rings) |
| Wattage | 35 Watts |
| Lumen Output | 3260 Lumens |
| Color Temperature | 6000K (Daylight White) |
| Dimmable | 3-Way (25%, 50%, 100%) |
| Switch Type | Foot Switch |
| Power Source | Corded Electric (120 Volts AC) |
| Material Type | Acrylic, Metal, Silicone |
| Finish Type | Electroplate (Chrome) |
| Lifespan | >50,000 hours |
| Indoor/Outdoor Usage | Indoor Only |
Warranty and Support
COSYLUX provides a manufacturer's warranty for this product. The manufacturer warranty is valid for 2 years from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your COSYLUX LED Modern Floor Lamp, please contact COSYLUX customer service. Refer to your purchase documentation or the COSYLUX official website for contact details.