1. Important Safety Information
Please read and understand all instructions before assembling and using this product. Keep this manual for future reference.
- Maximum Weight Capacity: Do not exceed the maximum weight recommendation of 300.1 pounds (136 kg). Exceeding this limit may result in injury or damage to the chair.
- Stability: Ensure the chair is placed on a stable, level surface to prevent tipping.
- Movement: Use caution when moving the chair, as it can swivel and roll. Avoid sudden movements that could lead to instability.
- Children: Keep children away from the chair during assembly. Do not allow children to play on or around the chair unsupervised.
- Maintenance: Regularly check all bolts and screws to ensure they are tight. Retighten if necessary.
2. Product Overview
The OLIXIS Criss Cross Chair is designed for comfort and versatility in various home and office settings. Its wide, armless design allows for comfortable cross-legged sitting, while adjustable features ensure ergonomic support. The chair is constructed with durable materials for long-lasting use.
Key Features:
- Comfortable Wide Seat: Designed to accommodate cross-legged sitting with high-density sponge padding.
- Adjustable Height: Easily adjust the seat height to suit your desk or preference.
- 360° Swivel: Full rotation for flexible movement.
- Tilt Function: Features a rocking mode for added comfort.
- Dual-purpose Base: Includes both smooth-rolling casters for mobility and stable foot pads for stationary use.
- Armless Design: Provides unrestricted movement and fits under most desks.
Product Dimensions:
Image: Detailed diagram illustrating the chair's dimensions, including seat width (25.59"), seat depth (18.90"), backrest height (13.98"), and adjustable seat height range (17.72" to 20.67").
- Overall Dimensions (D x W x H): 26.3" x 25.6" x 31.5" (at lowest height)
- Seat Depth: 18.9 inches
- Item Weight: 28 Pounds
3. Components List
Please ensure all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Seat Cushion
- Backrest
- Gas Lift Cylinder
- Base (with pre-installed casters)
- Optional Foot Pads (5 pieces)
- Assembly Hardware (screws, washers, Allen wrench)
- Instruction Manual
4. Setup and Assembly
Assembly is quick and easy. Follow the detailed instructions provided in the included assembly guide. An installation video is also available to assist you.
General Assembly Steps:
- Attach the base to the gas lift cylinder.
- Secure the seat cushion to the gas lift cylinder.
- Attach the backrest to the seat cushion using the provided hardware.
- Choose between installing the smooth casters for mobility or the stable foot pads for stationary use.
Image: The chair's base with both smooth casters and stable foot pads illustrated, highlighting the interchangeable design for different flooring types and stability needs.
5. Operating Instructions
Adjusting Seat Height:
- Locate the lever on the right side, underneath the seat cushion.
- To raise the seat: Lift the lever while taking your weight off the seat.
- To lower the seat: Lift the lever while remaining seated.
360° Swivel Function:
- The chair is designed to swivel freely in a full 360-degree motion.
- Simply rotate the seat to change direction.
Tilt Function (Rocking Mode):
- To activate the rocking mode, pull out the rocking function knob located underneath the seat.
- To lock the chair in an upright position, push the knob back in.
- The chair allows for a gentle rocking motion of up to 21 degrees.
Image: A close-up of the chair's underside, detailing the lever for height adjustment and illustrating the 360-degree swivel capability.
Image: A visual representation of the chair in rocking mode, showing the 21-degree tilt and the location of the rocking function knob.
6. Maintenance and Care
Cleaning:
- For general cleaning, wipe the chair with a soft, damp cloth.
- For spills or stains, spot clean immediately using a mild detergent and a clean cloth. Avoid harsh chemicals or abrasive cleaners.
- Allow the chair to air dry completely before use.
General Care:
- Periodically check all fasteners (screws, bolts) and tighten them as needed to ensure the chair remains stable and secure.
- Avoid exposing the chair to direct sunlight or extreme temperatures for prolonged periods, as this may cause material degradation.
7. Troubleshooting
Chair does not adjust height:
- Ensure the height adjustment lever is fully engaged.
- Check if the gas lift cylinder is properly installed and not damaged.
Chair feels unstable or wobbly:
- Verify that all assembly screws and bolts are securely tightened.
- Ensure the chair is on a flat, even surface.
- If using casters, check that they are properly inserted into the base. If using foot pads, ensure they are securely attached.
Wheels are not rolling smoothly:
- Check for any debris (hair, dust) caught in the casters and remove them.
- Ensure the casters are fully inserted into the base.
If you encounter issues not listed here or if troubleshooting steps do not resolve the problem, please contact OLIXIS customer support for assistance.
8. Specifications
| Brand | OLIXIS |
| Model Name | Criss Cross Legged Chairs |
| Model Number | 7262V2-LEABG |
| Color | Leather-beige |
| Material | Polyurethane, Foam, Sponge, Metal Frame |
| Product Dimensions (D x W x H) | 26.3"D x 25.6"W x 31.5"H |
| Seat Depth | 18.9 inches |
| Item Weight | 28 Pounds |
| Maximum Weight Recommendation | 300.1 Pounds |
| Assembly Required | Yes |
| Product Care Instructions | Spot Clean |
9. Warranty and Support
Warranty information for the OLIXIS Criss Cross Chair is not provided in this manual. For details regarding warranty coverage, product support, or to purchase replacement parts, please contact OLIXIS customer service directly or visit their official website.
You can find contact information on the product packaging or by searching for 'OLIXIS customer support' online.
