Tempsnow Fender Flares for Ford Maverick (2022-2025)

1. Product Overview

These Tempsnow Fender Flares are designed to provide enhanced protection and a rugged aesthetic for your Ford Maverick. They are engineered for a precise fit and durability.

1.1 Compatibility

These fender flares are specifically designed using scanned original vehicle data to ensure seamless integration with Ford Maverick models from 2022, 2023, 2024, and 2025.

1.2 Key Features

• Material: Constructed from high-quality PP (Polypropylene) material with a dual-texture matte finish. This material offers excellent temperature durability, wear resistance, and corrosion resistance.
• Durability: Provides exceptional toughness to withstand impacts from rocks, debris, and extreme weather conditions.
• Function: Acts as a protective shield, effectively guarding the vehicle's sides from mud, rocks, sticks, and other road debris. Helps preserve the original paint finish.

Image 1.1: The Tempsnow Fender Flares shown installed on a Ford Maverick and as individual components.

2. Installation Instructions

Installation of the Tempsnow Fender Flares is designed to be straightforward, requiring no cutting or drilling. The flares attach securely to the vehicle using the original mounting points.

2.1 Required Tools

• Basic hand tools (e.g., screwdriver, wrench) suitable for removing and re-securing original vehicle fasteners.

2.2 Installation Steps

1. Prepare the Vehicle: Ensure the vehicle's wheel wells and surrounding areas are clean and dry before installation.
2. Identify Flares: Lay out the four fender flares and identify their correct positions (front left, front right, rear left, rear right).
3. Remove Existing Fasteners: Carefully remove any existing screws or clips from the vehicle's wheel well lining that correspond to the fender flare mounting points.
4. Position Flare: Align the fender flare with the wheel arch, ensuring all mounting tabs and holes match the vehicle's original points.
5. Secure Flare: Use the original fasteners or provided hardware to securely attach the fender flare to the vehicle. Ensure a snug fit without overtightening.
6. Repeat for Remaining Flares: Follow the same steps for the other three fender flares.
7. Final Check: After all flares are installed, visually inspect each one to ensure it is securely mounted and properly aligned.

Image 2.1: All four fender flares for the Ford Maverick, ready for installation.

Image 2.2: Close-up of the fender flare's underside, highlighting the mounting points for secure attachment.

3. Function and Usage

Once installed, the Tempsnow Fender Flares serve as a permanent protective accessory for your Ford Maverick. They are designed to:

• Protect Vehicle Body: Shield the vehicle's paint and body panels from road debris, mud, and rocks kicked up by the tires.
• Enhance Appearance: Provide a more aggressive and rugged look to your vehicle.
• Maintain Cleanliness: Help reduce the amount of dirt and grime that accumulates on the side of your vehicle.

4. Care and Maintenance

To ensure the longevity and appearance of your Tempsnow Fender Flares, follow these simple maintenance guidelines:

• Regular Cleaning: Wash the fender flares regularly with mild automotive soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the matte finish.
• Inspect Fasteners: Periodically check all mounting fasteners to ensure they remain tight and secure. Re-tighten if necessary.
• Avoid Impact: While durable, extreme impacts can cause damage. Exercise caution when driving off-road or in tight spaces.

5. Troubleshooting

If you encounter any issues with your Tempsnow Fender Flares, consider the following:

• Loose Fit: If a flare feels loose, re-check all mounting fasteners to ensure they are properly tightened.
• Misalignment: If a flare appears misaligned, loosen the fasteners slightly, adjust the flare into the correct position, and then re-tighten.
• Unusual Noise: If you hear rattling or other unusual noises, inspect the flares for any loose components or contact points with the vehicle body.

For persistent issues not resolved by these steps, please refer to the Warranty and Support section.

6. Specifications

7. Warranty and Support

Tempsnow offers a 90-day return or exchange policy for Maverick fender flares without reason. If you encounter any issues or have questions regarding these fender flares, please send a message to the seller through your purchase platform for assistance.

For further inquiries or support, please contact Tempsnow customer service.