TaoHFE Pink Kids Vanity Table and Chair Set Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your TaoHFE Pink Kids Vanity Table and Chair Set, Model CT-VB003PK. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

2. Safety Information

• Keep all small parts and packaging materials away from children during assembly to prevent choking hazards.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not allow children to climb on the vanity table or chair.
• Place the vanity set on a flat, stable surface to prevent tipping.
• The LED mirror requires batteries (not included). Ensure correct battery polarity and dispose of used batteries responsibly.
• Avoid exposing the product to excessive moisture or direct sunlight.

3. Package Contents

Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Vanity Table Top with Mirror
• Table Legs (4)
• Drawer with Crystal Handle
• Side Cabinet with Door
• Chair Backrest
• Chair Seat
• Chair Legs (4)
• Assembly Hardware (screws, dowels, etc.)
• Instruction Manual

Figure 3.1: Overview of the TaoHFE Pink Kids Vanity Table and Chair Set.

4. Setup and Assembly

Assembly typically requires a Phillips head screwdriver (not included). Follow the steps carefully.

4.1. Assemble the Vanity Table

1. Attach the four table legs to the main table body using the provided screws. Ensure they are securely fastened.
2. Slide the drawer into its designated slot. Attach the crystal handle to the drawer front.
3. Attach the side cabinet door to the cabinet frame using the provided hinges.
4. Carefully place the vanity top with the mirror onto the assembled base, aligning it with the pre-drilled holes. Secure it with screws.

Figure 4.1: Detail of the LED mirror, crystal handle, and display glass.

4.2. Assemble the Chair

1. Attach the four chair legs to the chair seat using the provided screws.
2. Secure the chair backrest to the chair seat and legs.

4.3. Install LED Mirror Batteries

1. Locate the battery compartment behind the mirror.
2. Insert the required batteries (type and quantity specified on the compartment cover) ensuring correct polarity.
3. Close the battery compartment cover securely.

Figure 4.2: Rear view showing LED light wiring and battery compartment.

5. Operating Instructions

5.1. Using the LED Mirror Light

To activate the LED light, press the power button located on the vanity surface near the mirror. Press again to turn off the light. The light provides natural, warm illumination.

Figure 5.1: Location of the LED light power button.

5.2. Utilizing Storage

The vanity table includes a main drawer with six partitioned compartments for organizing small items such as jewelry, hair accessories, or small toys. A side cabinet with a door offers additional enclosed storage space.

Figure 5.2: Open drawer showing partitioned storage.

Figure 5.3: Vanity with side cabinet for storage.

6. Maintenance

6.1. Cleaning

• Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
• For the mirror, use a glass cleaner and a lint-free cloth.
• Ensure the vanity is dry after cleaning to prevent water damage.

6.2. General Care

• Periodically check all screws and connections to ensure they remain tight.
• Avoid placing hot items directly on the vanity surface.
• Keep the vanity away from direct heat sources or prolonged exposure to sunlight to prevent material degradation.

7. Troubleshooting

• LED Light Not Working:
  Check if batteries are correctly installed and not depleted. Replace batteries if necessary. Ensure the power button is pressed firmly.
• Drawer Sticking:
  Ensure the drawer is properly aligned on its runners. Check for any obstructions within the drawer or its compartment.
• Vanity or Chair Wobbles:
  Verify that all assembly screws are securely tightened. Ensure the product is placed on a level surface.

8. Specifications

Figure 8.1: Product dimensions diagram.

9. Warranty Information

For specific warranty details regarding your TaoHFE Pink Kids Vanity Table and Chair Set, please refer to the warranty card included with your purchase or contact TaoHFE customer support directly. Warranty terms and conditions may vary.

10. Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact TaoHFE customer support. Refer to the contact information provided on the product packaging or the official TaoHFE website.