1. Introduction
This manual provides essential information for the safe assembly, operation, and maintenance of your Bellemave Full Size Upholstered Daybed with Desk and Drawers and USB/LED Belt. Please read these instructions thoroughly before beginning assembly and retain this manual for future reference. Proper assembly and care will ensure the longevity and safe use of your daybed.
Image 1.1: Overview of the Bellemave Full Size Upholstered Daybed.
2. Safety Information
WARNING: Failure to follow these safety instructions could result in injury or damage to the product.
- Do not exceed the maximum weight recommendation of 600 pounds.
- Always follow the assembly instructions carefully to ensure safe operation.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Keep small parts away from children during assembly to prevent choking hazards.
- Use on a level surface to prevent tipping.
- Do not stand or jump on the daybed.
- For indoor use only.
3. Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
- Upholstered Headboard/Backrest Panels
- Bed Frame Components (Side Rails, End Panels)
- Wooden Slats
- Desk Unit
- Drawers (2 units)
- USB/LED Belt Unit
- Assembly Hardware (screws, bolts, Allen wrench, etc.)
- Assembly Instructions Manual
Image 3.1: View of the daybed frame, slats, and drawers before full assembly.
4. Setup & Assembly
Assembly of this daybed requires two adults and approximately 1-2 hours. All necessary tools and hardware are included. Please refer to the detailed step-by-step assembly manual provided in your package for specific instructions and diagrams.
- Preparation: Clear a spacious area for assembly. Lay out all components and hardware, ensuring they match the parts list.
- Frame Assembly: Begin by assembling the main bed frame structure according to the provided diagrams. Attach the upholstered headboard/backrest panels.
- Desk and Storage Unit: Assemble and attach the corner desk unit and any integrated shelving.
- Slat Installation: Securely install the wooden slats across the bed frame to support the mattress. Ensure even spacing and firm attachment.
- Drawer Assembly: Assemble the two storage drawers and insert them into their designated compartments beneath the bed frame.
- USB/LED Belt Installation: Install the USB/LED belt unit into the designated slot on the headboard/shelf. Connect the power cable to a suitable outlet.
- Final Check: Once assembled, ensure all connections are tight and the structure is stable.
Image 4.1: Partially assembled daybed showing the frame, slats, and desk structure.
5. Operating Instructions
Your Bellemave daybed is designed for versatile use as a bed, seating area, and workspace.
5.1. Daybed Use
Place a full-size mattress (not included) directly onto the wooden slats. The upholstered backrest provides comfortable support for sitting or lounging.
Image 5.1: The daybed configured with a mattress and bedding, ready for use.
5.2. Storage Drawers
The two integrated drawers located beneath the bed provide convenient storage for clothing, bedding, books, or other items. Pull the drawers out gently to access contents and push them back in fully when not in use.
Image 5.2: Close-up view of the two pull-out storage drawers.
5.3. USB/LED Belt and Charging Station
The integrated USB/LED belt features two standard power outlets and two USB ports. Plug the daybed's power cord into a wall outlet. The LED light can be turned on/off to provide ambient lighting or task lighting for the shelf area. Use the USB ports and power outlets to charge electronic devices or power small appliances.
Image 5.3: Detail of the integrated USB charging ports and power outlets.
Image 5.4: The daybed with the LED lighting feature illuminated.
5.4. Corner Desk
The corner desk provides a convenient surface for working, studying, or displaying items. It can be used with the daybed or as a standalone surface.
6. Maintenance
- Cleaning: For the wooden frame, wipe with a soft, damp cloth. Avoid harsh chemicals. For upholstered parts, spot clean with a mild fabric cleaner as needed. Test on an inconspicuous area first.
- Hardware Check: Periodically inspect all bolts, screws, and connections to ensure they remain tight. Re-tighten if any looseness is detected.
- Drawer Care: Keep drawer tracks free of debris to ensure smooth operation.
- Electrical Components: Ensure the USB/LED belt unit is unplugged before cleaning. Do not expose electrical components to water.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Daybed feels unstable or wobbly. | Loose hardware. Uneven floor. | Check and tighten all bolts and screws. Move the daybed to a level surface or use shims if necessary. |
| Drawers do not slide smoothly. | Debris in tracks. Misaligned drawer. | Clean drawer tracks. Ensure drawers are assembled correctly and aligned with the runners. |
| LED light or USB ports not working. | Power cord unplugged. Faulty connection. | Ensure the daybed's power cord is securely plugged into a working wall outlet. Check the connection of the USB/LED belt unit. |
8. Specifications
- Model Number: FST00152-FD-AE1
- Size: Full
- Product Dimensions: 94.5"L x 64.2"W x 43.3"H
- Color: Gray With Desk
- Material: Wood
- Weight Capacity: 600 pounds (maximum recommended)
- Assembly Required: Yes
- Included Components: Drawer, Headboard, Slat, Desk
- Special Features: Upholstered backrest, 2 storage drawers, integrated desk, USB charging ports, LED lighting.
Image 8.1: Dimensional drawing of the Bellemave Full Size Upholstered Daybed.
9. Warranty & Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Bellemave website. Keep your purchase receipt for warranty claims.
Manufacturer: Bellemave
UPC: 197793806466
