Important Safety Information
Please read and understand all instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- This chair must be assembled correctly for safe use.
- Always use the seat on a stable, level surface.
- The chair's height cannot be lowered during use. Adjust height only when not seated.
- Do not stand on the chair.
- Do not exceed the maximum weight capacity of 120 kg.
Product Overview
The VASAGLE LJB160GD01 vanity stool combines refinement and modern design, featuring velvet upholstery with shell-shaped stitching. It is designed to provide optimal ergonomic support and comfort for various settings, including bedrooms and dining areas.
Image: The VASAGLE vanity stool in a bedroom, showcasing its elegant design and velvet finish.
Key Features:
- Elegant Design: Velvet upholstery with decorative stitching for a sophisticated look.
- Ergonomic Support: High backrest (28 cm) and deep seat (38 cm) provide comfortable, enveloping support.
- 360° Swivel: Allows for easy movement and access in any direction.
- Adjustable Height: Seat height can be adjusted between 37.5 cm and 49.5 cm to suit various vanity or table heights.
- Stable Base: 41 cm diameter base with a non-slip rubber ring protects floors and reduces noise.
Image: Diagram comparing the ergonomic design of the VASAGLE stool with an inclined backrest and elevated seat edge for optimal support, versus a rigid, flat-seated chair.
Image: Close-up view of the stool's soft velvet upholstery and refined stitching, highlighting the texture and quality.
Components List
Before assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, please contact customer service.
- Seat with Backrest (1)
- Gas Lift Cylinder (1)
- Base (1)
- Screws (4)
- Assembly Tool (1) - (Typically an Allen key)
Assembly Instructions
Assembly is designed to be quick and straightforward. Follow these steps for proper setup:
- Attach Gas Cylinder to Base: Insert the narrow end of the gas lift cylinder into the central hole of the base. Ensure it is seated firmly.
- Attach Seat to Gas Cylinder: Place the seat assembly onto the wider end of the gas lift cylinder. The seat mechanism should align with the top of the cylinder.
- Secure Seat: Using the provided screws and tool, attach the seat to the gas lift mechanism from underneath. Tighten all 4 screws securely.
Once assembled, ensure all connections are tight and the chair is stable before use.
Image: Visual guide for the 3-step assembly process, illustrating how to connect the base, gas lift cylinder, and seat.
Operating Instructions
Your VASAGLE vanity stool offers adjustable height and a 360° swivel function for enhanced comfort and versatility.
Height Adjustment:
- To raise the seat: While standing, pull the adjustment lever upwards. The seat will rise automatically. Release the lever at the desired height.
- To lower the seat: While seated, pull the adjustment lever upwards. The seat will lower under your weight. Release the lever at the desired height.
The seat height can be adjusted between 37.5 cm and 49.5 cm.
Swivel Function:
The seat can rotate 360 degrees. Simply turn the seat in the desired direction. The wide, non-slip base ensures stability during rotation.
Image: Details of the stool's adjustable features, including the height adjustment lever, quality gas lift piston, and the non-slip ring under the base.
Care and Maintenance
Proper care will extend the life and appearance of your vanity stool.
Velvet Upholstery:
- Regular Cleaning: Gently vacuum the velvet upholstery regularly using a soft brush attachment to remove dust and debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can damage the velvet pile. For stubborn stains, use a mild upholstery cleaner specifically designed for velvet, testing on an inconspicuous area first.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading.
Metal Base and Frame:
- Cleaning: Wipe metal parts with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
Troubleshooting
If you encounter any issues with your vanity stool, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair is wobbly | Loose screws or uneven floor. | Check and tighten all assembly screws. Ensure the chair is on a flat, stable surface. |
| Height adjustment not working | Gas lift cylinder not properly installed or damaged. | Ensure the gas lift cylinder is correctly inserted into both the base and seat mechanism. If still not working, contact customer support. |
| Squeaking noise | Friction between parts. | Apply a small amount of silicone lubricant to moving parts, such as the gas lift mechanism or swivel plate. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | LJB160GD01 |
| Product Dimensions | 46.5D x 43W x (65.5-77.5)H cm (Overall) |
| Seat Height Adjustment | 37.5 cm to 49.5 cm |
| Backrest Height | 28 cm |
| Seat Depth | 38 cm |
| Base Diameter | 41 cm |
| Weight Capacity | 120 kg |
| Product Weight | 4.8 kg |
| Material | Velvet (Seat), Alloy Steel (Frame) |
| Color | Jelly Pink |
| Style | Modern and Elegant |
| Country of Origin | China |
Image: Detailed diagram illustrating the dimensions of the VASAGLE vanity stool, including seat height, backrest height, and base diameter.
Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or contact the retailer where the product was acquired. For technical support, missing parts, or any other inquiries, please contact VASAGLE customer service through their official website or the platform of purchase.
Please retain your proof of purchase for warranty claims.
