ASKGO G26 Folding Electric Bike User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your ASKGO G26 Folding Electric Bike. Please read this manual thoroughly before your first ride and retain it for future reference. Understanding the features and proper handling of your e-bike will ensure a safe and enjoyable experience.

Figure 1: The ASKGO G26 Folding Electric Bike in its unfolded state, showcasing its compact design and key components.

2. Safety Guidelines

Your safety is paramount. Adhere to the following guidelines to prevent injury or damage.

2.1 General Safety

• Always wear a certified helmet and appropriate safety gear.
• Familiarize yourself with and obey all local traffic laws and regulations.
• Perform a pre-ride inspection before each use, checking brakes, tire pressure, battery level, and all fasteners.
• Do not operate the e-bike under the influence of alcohol or drugs.
• Be aware of your surroundings and ride defensively, especially in traffic.
• Avoid riding in adverse weather conditions such as heavy rain, snow, or ice.

2.2 Battery Safety

The ASKGO G26 features a UL 2849 certified battery, ensuring compliance with safety standards for electric bicycles. Despite this certification, proper handling is crucial:

• Use only the charger provided with your e-bike.
• Do not expose the battery to extreme temperatures or direct sunlight for extended periods.
• Avoid puncturing, dropping, or otherwise damaging the battery.
• If the battery shows signs of damage or overheating, discontinue use immediately and contact support.

3. Setup and Initial Assembly

Your ASKGO G26 Folding Electric Bike comes partially assembled. Follow these steps to complete the assembly and prepare for your first ride.

3.1 Unpacking and Inspection

• Carefully remove all components from the packaging.
• Inspect all parts for any signs of shipping damage. If any parts are missing or damaged, contact customer support immediately.
• Ensure the included charger is present.

3.2 Assembly Steps

1. Unfold the Frame: Carefully unfold the main frame of the bike until it locks into place. Secure any quick-release levers.
2. Install Handlebars: Insert the handlebar stem into the head tube and tighten the clamping mechanism. Adjust the handlebar height to a comfortable position.
3. Install Seat Post: Insert the seat post into the frame's seat tube. Adjust the seat height for proper leg extension and secure it with the quick-release lever.
4. Attach Pedals: Identify the left (L) and right (R) pedals. Thread the left pedal counter-clockwise and the right pedal clockwise into the crank arms. Tighten securely with a wrench.
5. Check Front Wheel: Ensure the front wheel is securely installed in the fork. The quick-release skewer or axle nuts should be properly tightened.
6. Initial Battery Charge: Before your first ride, fully charge the battery. Refer to the 'Charging the Battery' section for detailed instructions.

4. Operating Your ASKGO G26

Learn how to power on, select riding modes, and utilize the features of your electric bike.

4.1 Powering On and Off

To power on the e-bike, press and hold the power button on the LCD display. To power off, press and hold the same button until the display turns off.

4.2 Riding Modes

The ASKGO G26 offers three riding modes to suit various preferences and terrains:

• Pure Electric Mode (Throttle): Engage the throttle for motor assistance without pedaling.
• Pedal Assist Mode (PAS): The motor provides assistance as you pedal. The level of assistance can be adjusted.
• Normal Bike Mode: Ride the bike like a traditional bicycle with no motor assistance.

Figure 2: Illustration of the three available riding modes: Throttle Mode, Pedal Assist, and Walk Assist.

4.3 LCD Display and Controls

The integrated LCD display provides real-time information and allows you to control various functions.

Figure 3: Detailed view of the Liquid Crystal Display (LCD) showing battery charge, speed display, gear adjustment, power ON/OFF, current status, and throttle control.

• Speed Display: Shows current riding speed.
• Battery Charge: Indicates remaining battery level.
• Gear Adjustment: Allows selection of pedal assist levels.
• Power ON/OFF: Button to turn the bike's electrical system on or off.
• Current Status: Displays various operational parameters.
• Throttle Control: Lever for engaging pure electric mode.

To switch speed units (Kilometers to Miles) and reach 20MPH in PAS mode:

• Double-click the 'Menu' button to switch speed units. Max speed can reach 20MPH when pedaling.
• Three-click the 'Menu' button to switch between kilometer and mile units.

4.4 Motor and Performance

The G26 is equipped with a high-torque motor for robust performance.

Figure 4: Diagram illustrating the internal components of the 1200W peak brushless motor, highlighting its high-energy design.

• Peak Motor Power: 1200W (continuous power is 500W).
• Max Speed: Up to 25 MPH in Pedal Assist Mode.
• Hill Climbing: Capable of conquering inclines up to 20 degrees.

4.5 Battery and Charging

The removable battery provides reliable power for your rides.

Figure 5: Visual representation of the 48V 10Ah Lithium-Ion battery, emphasizing its high power, safety (BMS), range, charging time, and IPX7 waterproof rating.

• Battery Type: 48V 10Ah Lithium-Ion.
• Range: Up to 45 miles per full charge in pedal assist mode.
• Charging Time: Approximately 3-5 hours for a full charge.
• Removable Design: Allows for convenient charging both on and off the bike.

4.6 Suspension System

The 6-point suspension system enhances ride comfort.

Figure 6: Close-up views of the fork damping, center shock, and rear shock components, illustrating the multi-vibration damping system for a smoother ride.

• Features front and rear double shock absorbers.
• Cushioned seat further reduces bumps for a comfortable ride.

4.7 Safety Lighting

Integrated lighting system for visibility and safety.

Figure 7: Images highlighting the bright LED headlights and the rear brake light/warning light, designed to enhance rider safety during day and night.

• Bright LED headlights for illumination.
• LED taillights with brake light and warning light functions for rear visibility.

4.8 Folding Mechanism

The fast-folding frame allows for easy storage and transport.

• Locate the folding latch on the main frame.
• Follow the instructions to release the latch and fold the bike.
• Ensure the bike is securely latched in both folded and unfolded positions.

5. Maintenance

Regular maintenance ensures the longevity and safe operation of your ASKGO G26.

5.1 Regular Checks

• Tires: Check tire pressure before each ride. Maintain recommended PSI. Inspect for wear or damage.
• Brakes: Test brake functionality before each ride. Ensure brake levers are responsive and brake pads are not excessively worn. Adjust as needed.
• Fasteners: Periodically check all bolts, nuts, and quick-release levers for tightness. Loose components can affect safety and performance.
• Chain/Drive System: Keep the chain clean and lubricated. Inspect for rust or damage.
• Suspension: Check suspension components for proper function and any signs of damage.

5.2 Battery Care

• Charge the battery regularly, even if not using the bike frequently, to maintain battery health.
• Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
• Avoid completely draining the battery before recharging.

5.3 Cleaning

Clean your e-bike with a damp cloth and mild soap. Avoid using high-pressure washers directly on electrical components.

6. Troubleshooting

This section addresses common issues you might encounter with your ASKGO G26.

If you encounter an issue not listed here or cannot resolve a problem, please contact ASKGO customer support.

7. Specifications

Key technical specifications for the ASKGO G26 Folding Electric Bike.

Figure 8: Diagram illustrating the key dimensions and weight specifications of the ASKGO G26 Folding Electric Bike, including recommended height and maximum load.

8. Warranty & Support

ASKGO provides a limited warranty for your G26 Folding Electric Bike.

8.1 Warranty Information

• Your ASKGO G26 Electric Bike comes with a 36-month limited warranty.
• This warranty covers manufacturing defects in materials and workmanship under normal use.
• The warranty does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.

8.2 Customer Support

For warranty claims, technical assistance, or any questions regarding your ASKGO G26 Electric Bike, please contact ASKGO customer support through the retailer where you purchased the product. Please have your purchase receipt and model information ready when contacting support.