Proscenic Q10 Robot Vacuum and Mop Cleaner User Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your Proscenic Q10 Robot Vacuum and Mop Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

Image 1: The Proscenic Q10 Robot Vacuum and Mop Cleaner, showcasing its sleek design and integrated features.

2. Setup and Preparation

2.1 Unboxing and Component Check

Carefully remove all components from the packaging. Ensure all items listed below are present and undamaged:

• Q10 Main Body
• 2-in-1 Water Tank and Dustbin
• Mop Cloth (x2)
• Charging Base
• Power Adapter
• Cleaning Brush
• Side Brushes (x2)
• Remote Control
• HEPA Filter (pre-installed)

2.2 Initial Assembly

1. Attach Side Brushes: Turn the robot over. Align the side brushes with the corresponding slots on the underside of the robot and press firmly until they click into place.
2. Install Mop Cloth: Attach a clean mop cloth to the bottom of the 2-in-1 water tank/dustbin module.
3. Insert 2-in-1 Module: Slide the assembled water tank/dustbin module into the designated slot at the rear of the robot until it locks securely.
4. Place Charging Base: Position the charging base against a wall in an open area, ensuring there are no obstacles within 1 meter (3 feet) to the sides and 2 meters (6 feet) in front. Connect the power adapter to the charging base and plug it into a power outlet.
5. Initial Charge: Place the robot onto the charging base. Ensure the charging contacts on the robot align with those on the base. The indicator lights will illuminate to confirm charging. Fully charge the robot before first use.

2.3 App Connection

For full functionality, download the Proscenic app from your smartphone's app store. Follow the in-app instructions to connect your Q10 robot to your home Wi-Fi network (2.4GHz only). The app allows for advanced control, scheduling, and mapping features.

Image 2: The Proscenic Q10 can be controlled via a smartphone app, voice assistants, or the included remote control.

3. Operating Instructions

3.1 Cleaning Modes

The Proscenic Q10 offers versatile cleaning options:

• Vacuuming Only: Ideal for daily dust and debris removal.
• Mopping Only: For light floor cleaning with water.
• Vacuuming and Mopping (3-in-1): Simultaneous cleaning for comprehensive floor care.

You can adjust suction power and water flow levels via the app or remote control to suit different floor types and cleaning needs.

Image 3: The robot vacuum can perform vacuuming, mopping, or a combined 3-in-1 cleaning function.

3.2 Navigation and Mapping

The Q10 utilizes advanced LiDAR navigation to create a precise map of your home. This allows for efficient cleaning paths, avoiding missed spots and repetitive cleaning.

• Multi-Floor Mapping: The robot can store up to 5 different maps, making it suitable for multi-story homes.
• Obstacle Avoidance: Equipped with sensors, the Q10 detects and navigates around furniture, wires, and other obstacles to prevent collisions.
• Carpet Boost: The robot automatically increases suction power when it detects carpets for deeper cleaning.

Image 4: The robot uses LiDAR technology to accurately map its surroundings for efficient cleaning.

3.3 Smart Features

• No-Go Zones & Virtual Walls: Use the app to define areas the robot should avoid or where it should not mop.
• Scheduled Cleaning: Set cleaning schedules for specific times and days via the app.
• Auto-Recharge and Resume: The robot automatically returns to its charging base when the battery is low (below 15%) and resumes cleaning from where it left off once charged (at 80%).

Image 5: The robot automatically returns to its charging base when the battery is low and resumes cleaning after recharging.

4. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your Proscenic Q10.

4.1 Cleaning the 2-in-1 Water Tank and Dustbin

1. Press the release button to remove the 2-in-1 module from the robot.
2. Open the dustbin compartment and empty collected debris into a trash bin.
3. Remove the HEPA filter and tap it gently to dislodge dust. Do not wash the HEPA filter with water.
4. Rinse the dustbin and water tank with clean water. Allow them to air dry completely before reassembling.

4.2 Cleaning Brushes and Sensors

• Side Brushes: Regularly check for tangled hair or debris. Use the provided cleaning tool to cut and remove any tangles. Replace worn brushes as needed.
• Main Brush: Remove the main brush cover and lift out the brush. Use the cleaning tool to remove tangled hair and debris.
• Sensors: Wipe all sensors (cliff sensors, wall sensors, charging contacts) with a clean, dry cloth to ensure proper function.

4.3 Mop Cloth Care

After each mopping session, remove the mop cloth and wash it by hand or machine. Allow it to air dry completely before reuse.

5. Troubleshooting

If you encounter issues with your Proscenic Q10, please refer to the following common solutions:

• Robot not charging: Ensure the charging base is powered on and the robot's charging contacts are properly aligned with the base. Clean the charging contacts if necessary.
• Robot stuck or lost: Clear obstacles from the robot's path. If the robot is lost, manually place it back on the charging base or use the app to locate it.
• Poor cleaning performance: Empty the dustbin, clean the filters, and remove any tangled hair from the brushes. Ensure the water tank is filled for mopping.
• App connection issues: Verify your Wi-Fi network is 2.4GHz. Restart your router, the robot, and your smartphone. Follow the app's pairing instructions carefully.

For persistent issues, please contact Proscenic customer support.

6. Specifications

7. Warranty and Support

The Proscenic Q10 comes with a 2-year availability for spare parts. For warranty claims, technical support, or further assistance, please refer to the contact information provided in your product packaging or visit the official Proscenic website.