Introduction
This instruction manual provides essential information for the safe and effective use of your onerbl 3-Prong AC Power Cord. This power cord is designed to supply electrical power to compatible devices, specifically EILISON KW818, KM-818-1, KM8181, and FitMax 3D XL Vibration Plate Exercise Machines. Please read this manual thoroughly before use and retain it for future reference.
Product Overview
The onerbl 3-Prong AC Power Cord is a replacement power supply cable. It features a standard 3-prong NEMA 5-15P plug for wall outlets and an IEC C13 connector for device input. This cord is engineered to meet the power requirements of your compatible vibration plate exercise machine, ensuring reliable operation.
Image: The onerbl 3-Prong AC Power Cord, showing the standard wall plug on one end and the device connector on the other. The cable is black and coiled.
Compatibility:
- EILISON KW818 Vibration Plate Exercise Machine
- EILISON KM-818-1 Vibration Plate Exercise Machine
- EILISON KM8181 Vibration Plate Exercise Machine
- FitMax 3D XL Vibration Plate Exercise Machine
- TODO Vibration Plate Exercise Machine Whole Body Vibration Machine
Important Safety Information
To prevent electric shock, fire, or damage to the product or connected device, always follow these safety precautions:
- Ensure the power cord is compatible with your device's voltage and power requirements (120 Volts).
- Do not use the power cord if it is damaged, frayed, or has exposed wires.
- Insert the plug fully into the wall outlet and the device's power input.
- Do not overload electrical outlets.
- Keep the power cord away from water, heat sources, and sharp objects.
- Do not attempt to modify or repair the power cord. Contact qualified personnel for assistance.
- Always unplug the power cord from the wall outlet before disconnecting it from the device or when not in use for extended periods.
- This power cord features Short Circuit Protection for enhanced safety.
Setup and Installation
Follow these steps to properly connect your onerbl 3-Prong AC Power Cord:
- Ensure your device is turned off and unplugged from any power source.
- Locate the power input port on your compatible vibration plate exercise machine. This port typically has three pins.
- Connect the IEC C13 end of the onerbl power cord firmly into the device's power input port.
- Plug the NEMA 5-15P end of the power cord into a standard 120-volt AC wall outlet.
- Verify that both connections are secure before turning on your device.
Operation
Once the onerbl 3-Prong AC Power Cord is correctly connected to both the wall outlet and your compatible device, it will supply the necessary electrical power. You can then operate your device according to its own instruction manual. The power cord itself does not require any specific operational steps beyond proper connection.
Care and Maintenance
- Keep the power cord clean and free from dust. Wipe with a dry, soft cloth if necessary.
- Avoid bending or kinking the cord sharply, as this can damage internal wires.
- Store the cord in a cool, dry place when not in use, preferably coiled loosely.
- Regularly inspect the cord for any signs of damage, such as cuts, abrasions, or discoloration. Discontinue use immediately if damage is found.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not receiving power. | Cord not fully plugged in. Wall outlet is not active. Cord is damaged. Device issue. | Ensure both ends of the cord are securely connected. Test the wall outlet with another device. Inspect the cord for damage; replace if necessary. Consult your device's manual. |
| Cord feels hot. | Overload or internal damage. | Immediately unplug the cord. Do not use it again. Replace with a new, compatible cord. |
Product Specifications
- Brand: onerbl
- Color: Black
- Special Feature: Short Circuit Protection
- Input Voltage: 120 Volts
- Item Weight: 4 ounces
- Package Dimensions: 4 x 3 x 1.5 inches
- Manufacturer: Shenzhen Waweis Technology Co., Ltd
Warranty and Support
This product is offered with a return policy allowing for refund or replacement within 30 days of purchase, as per the seller's terms. For technical support or warranty inquiries, please contact the manufacturer, Shenzhen Waweis Technology Co., Ltd, or your point of purchase (GreatComputerParts).
Manufacturer: Shenzhen Waweis Technology Co., Ltd
Seller: GreatComputerParts