Silverlit Flybotic Foldable WiFi Drone User Manual

1. Introduction

Thank you for choosing the Silverlit Flybotic Foldable WiFi Drone, Model 54079. This compact and easy-to-operate drone is designed for beginners and enthusiasts aged 8 and above. It features a built-in camera with live WiFi video feedback to your smartphone, automatic take-off and landing, and altitude hold for stable flight. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.

2. Safety Information

WARNING: Not suitable for children under 36 months. Contains small parts that may be swallowed.

• Always operate the drone in open, clear areas, away from people, animals, and obstacles.
• Do not fly near airports, restricted airspace, or power lines.
• Ensure all propellers are securely attached and undamaged before each flight.
• Keep fingers, hair, and loose clothing away from rotating propellers.
• Do not touch the motors after flight as they may be hot.
• Supervise children during drone operation.
• Use only original or approved replacement parts and accessories.
• Do not modify the drone or its components.
• Avoid flying in strong winds or adverse weather conditions.
• Always turn off the drone and controller after use.

3. Package Contents

Verify that all items are present in the package:

• Flybotic Foldable WiFi Drone
• Remote Controller
• Rechargeable Drone Batteries (x2)
• USB Charging Cable
• Carrying Pouch
• Spare Propellers (if included, general assumption)
• Instruction Manual (this document)

4. Product Overview

4.1 Drone Components

Figure 1: The Flybotic Foldable WiFi Drone and its remote controller. The drone features four foldable arms, a front-facing camera, and LED lights. The controller includes joysticks and buttons for flight control, with a mount for a smartphone.

• Foldable Arms: For compact storage and transport.
• Propellers: Four main propellers for lift and movement.
• Camera: Front-mounted camera for photo and video capture, with live WiFi feed.
• Battery Compartment: Located on the drone's body.
• LED Indicators: Provide status information during flight and charging.

4.2 Remote Controller

The remote controller allows precise control of the drone. It typically includes:

• Left Joystick: Controls throttle (up/down) and yaw (rotate left/right).
• Right Joystick: Controls pitch (forward/backward) and roll (left/right).
• One-Key Take-off/Landing Button: Initiates automatic take-off or landing.
• Speed Switch: Adjusts flight speed (e.g., low, medium, high).
• Photo/Video Button: Triggers camera functions via the app.
• Smartphone Holder: To mount your smartphone for live video feed.

5. Setup

5.1 Charging Batteries

1. Connect the drone battery to the USB charging cable.
2. Plug the USB cable into a USB power adapter (not included) or a computer USB port.
3. The charging indicator light will show the charging status (e.g., red for charging, green for fully charged).
4. Charging typically takes approximately 60-90 minutes per battery.
5. Ensure the remote controller batteries (usually AA, not specified but common) are also installed and charged if rechargeable, or new if disposable.

5.2 Battery Installation

1. Drone Battery: Carefully insert the fully charged drone battery into its compartment on the drone. Ensure it clicks into place securely.
2. Controller Batteries: Open the battery cover on the back of the remote controller. Insert the required batteries (e.g., 3x AA, check controller for specific type and polarity). Close the cover.

5.3 App Installation (for WiFi Video)

1. Scan the QR code provided in the product packaging or search for the "Flybotic" app (or similar, check product documentation) on your smartphone's app store (App Store for iOS, Google Play for Android).
2. Download and install the application.
3. Mount your smartphone securely onto the remote controller's holder.

5.4 Drone Preparation

1. Unfold Arms: Gently unfold all four arms of the drone until they lock into position.
2. Propeller Check: Ensure all propellers are free from damage and securely attached.
3. Place the drone on a flat, level surface for take-off.

6. Operating Instructions

6.1 Power On and Pairing

1. Turn on the drone by pressing the power button (location varies, typically on top or bottom). The drone's LED lights will flash.
2. Turn on the remote controller. The controller's indicator light will flash.
3. To pair, push the left joystick (throttle) fully up, then fully down. The drone's and controller's lights will become solid, indicating successful pairing.
4. Connect to WiFi (for FPV): On your smartphone, go to WiFi settings and connect to the drone's WiFi network (e.g., "Flybotic_XXXXXX"). Open the Flybotic app to view the live camera feed.

6.2 Take-off and Landing

• Automatic Take-off: After pairing, press the One-Key Take-off/Landing button. The drone will automatically ascend to a stable hovering altitude.
• Manual Take-off (Advanced): Gently push the left joystick (throttle) upwards. The propellers will spin, and the drone will ascend.
• Automatic Landing: Press the One-Key Take-off/Landing button again. The drone will slowly descend and land automatically.
• Manual Landing (Advanced): Gently pull the left joystick (throttle) downwards until the drone lands. Once landed, hold the joystick down for a few seconds to stop the propellers.

6.3 Flight Controls

• Altitude (Left Joystick Up/Down): Push up to ascend, pull down to descend.
• Yaw (Left Joystick Left/Right): Push left to rotate the drone counter-clockwise, push right to rotate clockwise.
• Forward/Backward (Right Joystick Up/Down): Push up to fly forward, pull down to fly backward.
• Left/Right (Right Joystick Left/Right): Push left to fly left, push right to fly right.
• Altitude Hold (Hover): The drone automatically maintains its altitude when the left joystick is released to the center position.
• Speed Adjustment: Use the speed switch button on the controller to cycle through different flight speeds (e.g., beginner, intermediate, expert).
• 360° Flip (if available): Consult the app or controller diagram for specific button combinations to perform aerial stunts.

6.4 Camera Operation

• Ensure your smartphone is connected to the drone's WiFi and the Flybotic app is open.
• The live video feed will appear on your smartphone screen.
• Take Photo: Tap the photo icon in the app or press the dedicated photo button on the controller (if available).
• Record Video: Tap the video icon in the app or press the dedicated video button on the controller (if available) to start/stop recording.
• Photos and videos are typically saved directly to your smartphone's gallery.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the drone and controller. Do not use water or solvents.
• Propeller Replacement: If a propeller is damaged, replace it with a spare. Ensure the correct propeller (A or B) is installed on the corresponding motor. Refer to markings on the drone and propellers.
• Battery Care: Store batteries in a cool, dry place. Do not overcharge or over-discharge. Remove batteries from the drone and controller if storing for extended periods.
• Storage: Fold the drone arms and store it in the provided carrying pouch to protect it from dust and damage.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Silverlit website. Keep your proof of purchase for any warranty claims.