Introduction
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your SOLIDEE 36-inch Natural Color Bathroom Vanity, Model BA20701. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Figure 1: SOLIDEE 36-inch Natural Color Bathroom Vanity with Gold Boat Vessel Sink.
Safety Information
Always use appropriate safety gear when handling and assembling the product. Be aware of sharp edges and heavy components to prevent injury. Follow the assembly instructions carefully to ensure safe and proper installation.
- Wear protective gloves and eyewear during assembly.
- Ensure all components are securely fastened before use.
- Do not overload drawers or cabinets.
- Keep small parts away from children to prevent choking hazards.
Package Contents
Your SOLIDEE Bathroom Vanity is shipped in two separate packages, and their arrival times may vary. Please ensure you have received both packages before starting assembly.
Figure 2: The vanity is shipped in two packages.
Package 1: Vanity Cabinet Components
- Main cabinet panels
- All necessary assembly hardware
- Installation Manual (this document)
Package 2: Sink and Plumbing Components
- Vessel sink (Gold Boat Glass Sink)
- Faucet
- Pop-up drain
- Hot/cold water supply lines
- Mounting hardware for sink and faucet
Specifications
| Feature | Detail |
|---|---|
| Brand | SOLIDEE |
| Model Number | BA20701 |
| Product Dimensions (D x W x H) | 19" x 36" x 31.5" |
| Sink Dimension (L x W) | 21" x 6.3" (Bowl thickness: 0.5") |
| Color | Natural (Cabinet), Gold Boat Glass (Sink) |
| Material | Engineered Wood (Cabinet), Low Lead Tempered Glass (Sink) |
| Item Weight | 66 Pounds |
| Number of Doors | 1 |
| Number of Drawers | 2 |
| Mounting Type | Floor Mount |
| Included Components | Vanity Cabinet, Sink, Faucet, Pop-up Drain, Hot/Cold Lines |
Figure 3: Vanity cabinet dimensions.
Figure 4: Vessel sink dimensions and material details.
Setup and Assembly
The SOLIDEE Bathroom Vanity requires self-assembly. Please follow the step-by-step instructions provided in the separate assembly guide included in Package 1. Ensure you have all components from both packages before starting.
Key Assembly Steps:
- Unpack and Verify: Carefully unpack all components from both packages. Compare them against the parts list in the assembly guide to ensure nothing is missing or damaged.
- Assemble Cabinet Frame: Follow the instructions to assemble the main cabinet frame using the provided hardware.
- Install Doors and Drawers: Attach the cabinet door(s) and assemble the drawers. The magnetic door design ensures smooth operation.
- Place Sink: Position the vessel sink on the vanity top. Ensure proper alignment with the pre-drilled holes.
- Install Faucet and Drain: Install the faucet, pop-up drain, and connect the hot/cold lines according to the plumbing instructions. It is recommended to have a qualified plumber perform these connections.
- Secure Vanity: Once assembled, position the vanity in its desired location. For added stability, consider securing it to the wall using appropriate mounting hardware (not always included, check your local building codes).
Figure 5: Interior storage design of the vanity.
Figure 6: Faucet, pop-up drain, and water line components.
Figure 7: Fully assembled vanity with sink and faucet.
Operating Instructions
Your SOLIDEE Bathroom Vanity is designed for standard bathroom use. The cabinet provides storage for toiletries and other bathroom essentials, while the vessel sink and faucet offer a functional washing area.
- Cabinet and Drawers: Utilize the spacious cabinet and two drawers for organized storage. The magnetic door ensures smooth and quiet opening and closing.
- Sink and Faucet: Operate the faucet to control water flow and temperature. The vessel sink is designed for efficient water drainage.
Maintenance
Proper care will extend the life and appearance of your vanity.
- Cabinet: Wipe the engineered wood surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that can damage the finish. Promptly wipe up any water spills to prevent moisture damage.
- Sink: Clean the glass vessel sink with a non-abrasive glass cleaner and a soft cloth. Rinse thoroughly after cleaning.
- Faucet: Clean the faucet with a soft cloth and mild soap. Avoid harsh chemicals that can tarnish the finish.
- Hardware: Periodically check all screws and connections to ensure they remain tight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vanity wobbles or is unstable | Uneven floor; loose connections | Adjust leveling feet (if present) or use shims. Tighten all assembly screws. Consider securing to wall. |
| Water pooling on vanity top | Excessive splashing; inadequate sealing around sink | Wipe up water immediately. Ensure proper sealant was applied around the sink during installation. |
| Drawer or door not closing smoothly | Misalignment; obstruction | Check for obstructions. Adjust hinges or drawer slides as per assembly guide. |
| Faucet leaks | Loose connections; worn washer | Tighten water supply lines. Consult a plumber for internal faucet issues. |
Warranty
Please refer to the product packaging or the seller's information for specific warranty details. Generally, products are covered against manufacturing defects for a limited period from the date of purchase. Keep your proof of purchase for any warranty claims.
Support
For further assistance, missing parts, or technical support, please contact SOLIDEE customer service through the retailer where you purchased the product or visit the official SOLIDEE store online.
Online Store: Visit the SOLIDEE Store on Amazon