BEZGAR E88GT Drone with Screen on Controller User Manual

Introduction

This manual provides detailed instructions for the safe operation and maintenance of your BEZGAR E88GT Drone. Please read this manual thoroughly before operating the drone to ensure proper use and to prevent damage or injury.

What's Included

The BEZGAR E88GT Drone package includes the following components:

• E88GT Brushless Drone x 1
• 4.3" Screen Remote Controller x 1
• USB Charging Cable x 2
• Battery x 3
• Strobe Light x 2
• 8G SD Card x 1
• Card Reader x 1
• Screwdriver x 1
• Propeller Blades x 4 (spare)
• Remote Control Extender Rod x 2
• User Manual x 1
• App Guide x 1
• Carry Case x 1

Image: The BEZGAR E88GT drone, remote controller, and various accessories neatly packed in the included carrying case.

Setup Guide

1. Charging the Batteries

Before first use, fully charge all drone batteries and the remote controller. Use the provided USB charging cables. The drone batteries are 3.7V 1600mAh Lithium Ion.

Image: A drone battery module being inserted into the drone's battery compartment, highlighting the modular battery design.

2. Installing Propellers

Attach the propeller blades to the drone arms. Ensure each propeller is securely fastened. Use the included screwdriver if necessary. Refer to the markings on the propellers and drone arms for correct orientation (A/B). Incorrect installation can affect flight stability.

3. Inserting the SD Card

Insert the provided 8GB SD card into the designated slot on the remote controller before flight to record photos and videos. Ensure it is inserted correctly until it clicks into place.

Image: The remote controller with its integrated 4.3-inch screen, showing an 8GB SD card being inserted into the side slot. A note indicates to insert the TF card before flight.

4. Remote Controller Setup

Attach the remote control extender rods if desired for enhanced grip. Power on the remote controller by pressing the ON/OFF button.

5. Initial Pairing and Calibration

Place the drone on a flat, level surface. Power on the drone, then power on the remote controller. The drone and controller should automatically pair. Follow the on-screen prompts on the controller's display for any necessary calibration steps before your first flight.

Operating Instructions

1. Powering On/Off

To power on the drone, press and hold the power button until the indicator lights illuminate. To power off, press and hold the power button again. Similarly, use the ON/OFF button on the remote controller.

2. One-Key Takeoff and Landing

After pairing and calibration, press the one-key takeoff button on the controller. The drone will automatically ascend to a stable hovering height. To land, press the one-key landing button, and the drone will descend and land gently.

3. Basic Flight Controls

• Throttle Control (Left Stick): Push up to ascend, pull down to descend.
• Direction Control (Right Stick): Push forward to fly forward, pull back to fly backward. Push left to fly left, push right to fly right.
• Rotation (Left Stick Left/Right): Push left to rotate counter-clockwise, push right to rotate clockwise.

Image: A detailed diagram of the remote controller, labeling various buttons and joysticks with their corresponding functions, such as speed regulation, throttle control, headless mode, one-click takeoff/landing, camera controls, and screen navigation.

4. Camera Operation and Real-time Transmission

The drone is equipped with a 1080P HD camera that can be adjusted 90 degrees. The 4.3-inch screen on the remote controller provides a real-time FPV (First Person View) feed via Wi-Fi. This allows you to monitor your flight and capture photos and videos directly.

• Taking Photos: Press the designated photo button on the controller.
• Recording Videos: Press the designated video button to start/stop recording.
• Adjusting Camera Angle: Use the camera angle adjustment buttons on the controller.

Image: A close-up view of the drone's 1080P HD camera, illustrating its 90-degree electric adjustable feature for capturing various angles.

Image: A drone flying outdoors with a mountainous landscape visible on the remote controller's screen, demonstrating the real-time image transmission feature. Note: Wi-Fi connection provides a transmission range of approximately 250-300 feet without interference.

5. Multiple Control Modes

The BEZGAR E88GT supports various control methods:

• Remote Control: Standard operation using the included controller.
• App Control: Connect your smartphone via Wi-Fi to control the drone and access advanced features through the dedicated app.
• Gravity Control: Utilize your smartphone's accelerometer to control the drone's movement by tilting the phone.

Image: Visual representation of the multiple remote control modes available for the drone, including traditional remote control, app control via a smartphone, and gravity control by tilting the phone.

6. Speed Regulation

The drone features multiple speed settings (low, medium, high) to accommodate different skill levels and flying conditions. Adjust the speed using the dedicated button on the remote controller.

7. Headless Mode

In Headless Mode, the drone's orientation is relative to the pilot, making it easier to control for beginners as there's no need to adjust for the drone's front or back. Activate this mode via the controller.

8. Stunt Rolling

Perform 360-degree stunt rolls by pressing the stunt button and moving the right joystick in the desired direction. Ensure sufficient altitude and clear surroundings before attempting stunts.

9. Trajectory Flight

Using the companion app, you can draw a flight path on your smartphone screen, and the drone will automatically follow the specified trajectory.

Official Product Video

Maintenance

1. Battery Care

• Always use the provided charging cables.
• Do not overcharge or over-discharge batteries.
• Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
• If not used for extended periods, charge batteries to about 50% for storage.

2. Propeller Replacement

In case of damage, replace propellers with the spare blades provided. Ensure the correct A/B type is used for each motor. Use the screwdriver to remove and install propellers carefully.

3. Cleaning and Storage

Wipe the drone and controller with a soft, dry cloth after use. Avoid using harsh chemicals. When not in use, store the drone and all accessories in the included carrying case to protect them from dust and damage.

Image: The BEZGAR E88GT drone and its remote controller securely placed within a custom-fit storage bag, emphasizing portability and protection.

Troubleshooting

Common Issues and Solutions:

• Drone does not respond to controller:
  • Ensure both drone and controller are powered on and fully charged.
  • Re-pair the drone and controller according to the setup instructions.
  • Check for interference from other Wi-Fi devices.
• Drone drifts during flight:
  • Perform a gyroscope calibration on a flat surface.
  • Check for damaged propellers and replace if necessary.
  • Adjust trim settings on the controller.
• Camera feed is unstable or disconnected:
  • Ensure a strong Wi-Fi connection between the drone and controller.
  • Move closer to the drone to improve signal strength (transmission range is about 250-300 ft).
  • Restart both the drone and controller.
• Photos/Videos not saving to SD card:
  • Ensure the SD card is properly inserted into the controller.
  • Check if the SD card has sufficient free space.
  • Format the SD card if issues persist (back up data first).
• Short flight time or low power warning:
  • Ensure batteries are fully charged before each flight.
  • Battery performance may degrade over time; consider replacing old batteries.
  • Avoid flying in strong winds, which consumes more power.

Image: The BEZGAR E88GT drone in flight over a picturesque outdoor setting, emphasizing its use in open environments for optimal performance.

Specifications

Image: The BEZGAR E88GT drone displayed with its key dimensions labeled, showing both folded and unfolded sizes for clarity.

Warranty and Support

BEZGAR products are designed for reliability and performance. While specific warranty details are not provided in this manual, BEZGAR is known for its customer support. If you encounter any issues or require assistance with your BEZGAR E88GT Drone, please contact BEZGAR customer service directly.

For support, visit the official BEZGAR website or refer to the contact information provided in the product packaging or on the BEZGAR Amazon store page.

Note: Keep your purchase receipt as proof of purchase for any warranty claims.