Introduction
This manual provides essential information for the proper setup, operation, maintenance, and care of your Timex Women's Trend 25mm Watch. This timepiece features a 25mm polished case, a gold-tone sunray dial with applied indices, an elegantly fluted bezel, and a gold-tone stainless-steel bracelet. It is equipped with a quartz movement and luminant hands for visibility in low light conditions.
Image: Front view of the Timex Women's Trend 25mm Watch, showcasing the gold-tone dial and bracelet.
Setup
1. Setting the Time
- Pull out the crown: Gently pull the crown (the small knob on the side of the watch case) to its outermost position.
- Adjust the time: Rotate the crown clockwise or counter-clockwise until the hour and minute hands indicate the correct time.
- Push in the crown: Once the time is set, push the crown back into its original position against the watch case. This will start the watch movement.
Image: Side view of the watch, highlighting the crown used for time adjustment.
2. Adjusting the Bracelet
The watch features a deployment clasp for secure wearing. To adjust the bracelet length, it may be necessary to remove or add links. This procedure typically requires specialized tools and is best performed by a qualified jeweler or watch technician to avoid damage to the bracelet or clasp.
Image: Back view of the watch, showing the deployment clasp in an open position.
Operating
1. Time-Telling
Your watch displays time using traditional hour and minute hands. The luminant hands provide enhanced visibility in low-light conditions, allowing you to read the time without external illumination.
2. Water Resistance
This watch is water resistant to 50 meters (165 feet). This rating means the watch is suitable for short periods of recreational swimming. It is not suitable for diving, snorkeling, or prolonged water activities. Always ensure the crown is fully pushed in before any contact with water.
- Avoid operating the crown while the watch is wet or submerged.
- Do not expose the watch to hot water, steam, or harsh chemicals, as this can compromise the water resistance seals.
Maintenance
1. Cleaning
To maintain the appearance of your watch, regularly wipe the case and bracelet with a soft, dry cloth. For the stainless-steel bracelet, a slightly damp cloth can be used, followed by immediate drying. Avoid using abrasive cleaners or solvents.
2. Battery Replacement
The watch is powered by a 12V battery (included). When the watch stops running, the battery will need to be replaced. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and to prevent damage to the movement. Refer to the specifications section for battery type.
3. Storage
When not wearing your watch, store it in a dry place away from direct sunlight, extreme temperatures, and strong magnetic fields.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch is not running | Battery depleted; Crown not pushed in | Replace battery (professional service recommended); Push crown fully into case |
| Time is inaccurate | Time not set correctly; Low battery | Reset the time; Replace battery (professional service recommended) |
| Condensation under crystal | Water resistance compromised | Immediately contact Timex customer support or a qualified watch repair center. Do not attempt to open the watch. |
Specifications
- Model Number: TW2W91000UK
- Brand: Timex
- Movement Type: Quartz
- Case Material: Low Lead Brass
- Case Diameter: 25 Millimeters
- Case Thickness: 8 Millimeters
- Band Material: Stainless Steel
- Band Width: 12 Millimeters
- Crystal: Mineral Glass
- Water Resistance Depth: 50 Meters (165 Feet)
- Clasp Type: Deployment Clasp
- Battery: 1 x 12V (included)
- Item Weight: 219.27 Grams
Warranty and Support
For warranty information, service, or additional support, please visit the official Timex website or contact Timex customer service directly. Keep your purchase receipt as proof of purchase.
You can find more information and contact details on the Timex Brand Store.