HIPIHOM 3-Piece Dining Table Set (Model JA25003) Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your HIPIHOM 3-Piece Dining Table Set. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. This set includes one dining table and two benches, designed for accommodating up to 6 people.

HIPIHOM 3-Piece Dining Table Set with Grey Table and two Benches

Image: The HIPIHOM 3-Piece Dining Table Set, featuring a grey rectangular table and two matching benches.

Safety Information

Please observe the following safety guidelines to prevent injury or damage to the product:

Exercise caution around sharp edges during assembly and use.
Always assemble the dining set strictly according to the provided instructions to prevent tip-over risks.
Do not place excessively heavy objects on the table or benches to avoid structural damage.
Ensure all screws and fasteners are tightened securely before use and periodically check for looseness.
Keep small parts away from children during assembly.

Package Contents

Verify that all components are present before beginning assembly. The package should contain:

Table Top (1)
Table Legs (Set)
Benches (2)
Installation Guide (1)
Hardware Pack (Screws, Allen Wrench, etc.)

Diagram showing dimensions of the dining table and benches, and two boxes labeled BOX1 and BOX2.

Image: Product dimensions and a note indicating that the table and benches may ship in separate boxes.

Setup and Assembly

Follow these steps for proper assembly of your dining set. It is recommended to assemble on a soft, clean surface to prevent scratches.

Unpack Components: Carefully remove all parts from the packaging and lay them out. Check against the package contents list.
Attach Table Legs: Securely attach the table legs to the underside of the table top using the provided screws and tool. Ensure all connections are firm.
Assemble Benches: Align and attach the legs to each bench seat using the designated hardware.
Final Placement: Once assembled, place the benches under the table for storage or arrange them as desired for use.

Close-up of the table legs, showing the metal cross-bracing for support.

Image: Detail of the table's metal legs, highlighting their robust construction.

Close-up of an adjustable foot pad on a table leg, designed to prevent floor scratches.

Image: Adjustable foot pads on the table legs, designed to protect floors and stabilize the table on uneven surfaces.

Operating (Usage)

Your HIPIHOM dining set is designed for versatile use in various settings. The benches can be conveniently stored under the table when not in use, optimizing space in smaller areas.

Seating Capacity: The set comfortably accommodates up to 6 people.
Space-Saving Feature: Slide the benches completely under the table when not needed to maximize floor space.
Versatile Placement: Suitable for dining rooms, kitchens, breakfast nooks, or even as a workspace.

Diagram showing benches stored under the table and pulled out for use, illustrating the space-saving design.

Image: Illustration demonstrating how the benches can be easily stored under the table to save space.

Two images side-by-side, one showing the dining set with benches pulled out ('In Use') and the other with benches stored under the table ('Stored').

Image: Comparison of the dining set in use and with benches stored, highlighting its space-saving design for small rooms.

Maintenance

Proper care will extend the life and appearance of your dining set.

Cleaning: Wipe the surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
Spills: Clean spills immediately to prevent staining. The tabletop is designed to be water-resistant.
Heat Protection: While the tabletop offers some heat resistance, it is advisable to use placemats or coasters for hot dishes to prevent potential damage.
Regular Checks: Periodically inspect all screws and connections to ensure they remain tight. Retighten as necessary.

Three images demonstrating product features: a hand wiping a spill, a hand cutting vegetables on the surface, and a hot pot on the surface, indicating easy cleaning, anti-scratch, and high temperature resistance.

Image: Demonstrates the ease of cleaning, anti-scratch properties, and high temperature resistance of the tabletop.

Troubleshooting

If you encounter any issues, refer to the following common solutions:

Wobbly Table/Bench: Check all leg connections and ensure screws are fully tightened. Use the adjustable leg pads to stabilize the unit on uneven floors.
Missing Parts: If any parts are missing from your package, please contact HIPIHOM customer support immediately.
Difficulty Assembling: Review the assembly steps carefully. Ensure you are using the correct hardware for each step. Do not force parts together.

Specifications

Model Number	JA25003
Brand	HIPIHOM
Color	Grey Table With 2 Benches
Table Dimensions (L x W x H)	70.88" x 31.51" x 29.54"
Bench Dimensions (L x W x H)	47.26" x 11.63" x 17.73"
Tabletop Thickness	1.97 inches
Material	Engineered Wood (MDF Tabletop) with Metal Legs
Item Weight	70.6 pounds
Table Load Capacity	Up to 260 lb
Bench Load Capacity	Up to 330 lb (per bench, inferred from image)
Waterproof	Yes (Tabletop)

Close-up of the tabletop surface, highlighting the MDF material and wood grain finish.

Image: Detail of the MDF tabletop material, showcasing its texture and quality.

Side view of the tabletop showing its 1.97 inch thickness.

Image: A side profile view of the tabletop, indicating its 1.97-inch thickness.

Warranty and Support

For warranty information or technical support, please contact HIPIHOM customer service. Keep your purchase receipt and model number (JA25003) handy for faster service.

Brand Store: Visit the HIPIHOM Store on Amazon

HIPIHOM JA25003