Introduction
Thank you for purchasing the Fansbe Direct KB-M722 Sound Bar. This manual provides essential information for setting up, operating, and maintaining your new sound system. Please read it thoroughly before use to ensure optimal performance and safety.
What's in the Box
- Soundbar x 1
- Remote Control (batteries not included) x 1
- 1.5m HDMI(ARC) Cable x 1
- 1.5m Optical Cable x 1
- 1.5m 3.5mm AUX Cable x 1
- Wall Mount Kit x 1
- User Manual x 1
Image: Contents of the Fansbe Direct KB-M722 Sound Bar package.
Setup
Placement Options
The KB-M722 Sound Bar offers versatile placement options to suit your environment:
- Tabletop Placement: Position the sound bar on a flat, stable surface in front of your television or monitor. Ensure there is adequate space for ventilation.
- Wall Mounting: Use the included wall mount kit and template to securely attach the sound bar to a wall. Follow the instructions provided with the wall mount kit for proper installation.
Image: Tabletop and Wall Mount Installation Options.
Connection Methods
The sound bar supports multiple connection types for various devices:
- HDMI (ARC): Connect the included HDMI cable from the sound bar's HDMI (ARC) port to your TV's HDMI (ARC) port. This allows for audio return channel functionality.
- Optical: Use the included optical cable to connect the sound bar's OPT port to your TV's optical output.
- AUX: Connect the included 3.5mm AUX cable from the sound bar's AUX port to your device's audio output.
- USB: Insert a USB drive into the USB port to play audio files directly.
- Bluetooth: Pair your Bluetooth-enabled device wirelessly with the sound bar.
- COAX: Connect a coaxial cable (not included) from the sound bar's COAX port to your device's coaxial output.
Image: Multiple Link Interfaces on the sound bar's rear panel.
Image: Bluetooth 5.3 Link for wireless audio streaming.
Operating Instructions
Power On/Off
Press and hold the Power button on the sound bar or the remote control to turn the unit on or off.
Mode Selection
Short press the 'M' (Mode) button on the sound bar or the remote control to cycle through available input modes: Bluetooth (BT), USB, Optical (OPT), HDMI (ARC), AUX, and Coaxial (COAX).
Volume Control
Use the Volume Up (+) and Volume Down (-) buttons on the sound bar or the remote control to adjust the audio level.
EQ Sound Modes
The sound bar features three equalizer (EQ) modes to optimize audio for different content:
- Movie Mode: Enhances dialogue and special effects for an immersive cinematic experience.
- Music Mode: Provides balanced audio for music playback, emphasizing clarity and bass.
- News Mode: Optimizes vocal clarity for news broadcasts and spoken content.
Select the desired EQ mode using the dedicated buttons on the remote control.
Image: Available EQ Sound Modes.
Remote Control Functions
The included remote control provides full functionality for your sound bar. Refer to the diagram below for button descriptions:
Image: Remote Control and Sound Bar Button Functions.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the sound bar. Do not use liquid cleaners or abrasive materials.
- Storage: If storing the sound bar for an extended period, disconnect it from power and store it in a cool, dry place.
- Ventilation: Ensure the sound bar has adequate ventilation to prevent overheating. Do not block any ventilation openings.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from sound bar | Incorrect input mode selected; Cables not connected properly; TV audio output settings incorrect; Sound bar muted or volume too low. | Select the correct input mode (e.g., HDMI ARC, Optical, Bluetooth). Ensure all cables are securely connected. Check your TV's audio output settings (e.g., PCM, External Speaker). Unmute the sound bar and increase volume. |
| Bluetooth device not pairing | Sound bar not in pairing mode; Device too far; Interference. | Ensure the sound bar is in Bluetooth mode and actively searching for devices. Move your device closer to the sound bar. Avoid placing the sound bar near other wireless devices that may cause interference. |
| Remote control not working | Batteries depleted or incorrectly inserted; Obstruction between remote and sound bar. | Replace batteries with new ones, ensuring correct polarity. Remove any obstructions between the remote control and the sound bar's sensor. |
Specifications
- Brand: Fansbe Direct
- Model Name: KB-M722
- Speaker Type: Soundbar
- Special Feature: Display, USB Port
- Recommended Uses For Product: For Surround Sound Systems
- Unit Count: 1.0 Count
- Color: Black
- Product Dimensions: 15.94"D x 3.35"W x 2.56"H
- Item Weight: 3.08 pounds
- Wireless Communication Technology: Bluetooth
- Speaker Maximum Output Power: 40 Watts
- Connectivity Technology: HDMI, Optical, AUX, USB, Coaxial, Bluetooth
- Mounting Type: Tabletop Mount, Wall Mount
Warranty
This Fansbe Direct product is covered by a limited manufacturer's warranty. Please refer to the warranty card included in your package or contact customer support for specific details regarding coverage and duration.
Support
For technical assistance, troubleshooting, or product inquiries, please contact Fansbe Direct customer support. Contact information can be found on the product packaging or our official website.
