IRONCK MRC-B01

IRONCK Outdoor Rocking Chair Model MRC-B01 User Manual

Comprehensive instructions for assembly, operation, and maintenance.

Introduction

Thank you for choosing the IRONCK Outdoor Rocking Chair, Model MRC-B01. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new rocking chair. Please read all instructions carefully before use and retain this manual for future reference.

The IRONCK rocking chair is designed for comfort and durability, featuring a sturdy alloy steel frame, handwoven PE rattan, and a plush, weather-resistant cushion. It is suitable for various indoor and outdoor settings, including living rooms, bedrooms, patios, gardens, and balconies.

Safety Information

  • Ensure all parts are securely fastened before use.
  • Do not exceed the maximum weight capacity of 450 lbs (204 kg).
  • Keep children and pets away from the assembly area.
  • Use on a flat, stable surface to prevent tipping.
  • Avoid placing the chair near open flames or extreme heat sources.
  • Regularly inspect the chair for any loose parts or damage. Do not use if damaged.

Parts List

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

Diagram showing chair dimensions and parts count

Image: Overview of chair dimensions and components. The chair consists of 5 main parts and requires 4 steps for assembly, estimated 18 minutes. Maximum weight capacity is 450 lbs.

  • Chair Frame (Main Body)
  • Rocking Base (2 pieces)
  • Cushion
  • Hardware Pack (bolts, washers, wrench)

Setup and Assembly

Assembly is straightforward and typically takes about 18 minutes. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

  1. Unpack Components: Carefully remove all parts from the packaging. Lay them out and compare with the parts list to ensure everything is present.
  2. Attach Rocking Bases: Connect the two rocking base pieces to the main chair frame using the provided bolts and washers. Ensure the curved ends are facing the correct direction for rocking motion. Tighten all bolts securely with the included wrench.
  3. Secure Cushion: Place the cushion onto the chair frame. The cushion features a slip-over pocket or ties to keep it in place. Ensure it is properly aligned and secured.
  4. Final Check: Once assembled, gently rock the chair to ensure stability and that all connections are tight.
Detailed view of chair construction, showing ergonomic design, heavy-duty frame, handwoven rattan, and anti-slip features

Image: Illustrates the chair's ergonomic design, heavy-duty powder-coated iron frame, handwoven PE rattan, and ultra-quiet, anti-slip rubber on the rockers.

Operating Instructions

The IRONCK rocking chair is designed for comfortable lounging and gentle rocking. Its ergonomic shape supports relaxation.

  • Sitting: Sit gently into the chair, ensuring your weight is evenly distributed.
  • Rocking Motion: The chair provides a smooth 30-degree rocking motion. Use your feet to initiate and control the rocking. The silent rubber on the rockers ensures quiet operation and floor protection.
  • Placement: This chair is versatile and can be used in various indoor and outdoor environments such as living rooms, bedrooms, patios, gardens, and balconies.
Image demonstrating the 30-degree rocking motion of the chair

Image: Visual representation of the chair's 30-degree rocking capability, highlighting its smooth and gentle motion.

Close-up of the cushion with a child, showing features like water-resistance, ultra-soft cotton, non-slip design, UV resistance, fade resistance, breathability, and all-weather suitability

Image: Details of the ultra-soft and breathable cushion, emphasizing its water-resistant, UV-resistant, fade-resistant, breathable, and all-weather properties, along with its non-slip design.

Care and Maintenance

Proper care will extend the life and appearance of your rocking chair.

  • Frame Cleaning: Wipe the alloy steel frame and PE rattan with a dry or damp cloth as needed. Avoid harsh chemicals or abrasive cleaners.
  • Cushion Care: The Olefin cushion is water-resistant and fade-resistant. For spills, blot immediately with a clean cloth. For deeper cleaning, use a mild soap solution and rinse thoroughly. Allow to air dry completely.
  • Storage: While designed for outdoor use, storing the chair in a sheltered area during extreme weather conditions (heavy rain, snow, prolonged direct sunlight) will help preserve its condition.
  • Hardware Check: Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary.

Troubleshooting

ProblemPossible CauseSolution
Chair feels unstable or wobbly.Loose bolts or uneven surface.Ensure all assembly bolts are securely tightened. Move the chair to a flat, level surface.
Rocking motion is not smooth or makes noise.Debris on rockers or loose connections.Check the rubber strips on the rockers for any obstructions. Verify that the rocking base is firmly attached to the frame.
Cushion slides off.Cushion not properly secured.Ensure the cushion's slip-over pocket or ties are correctly attached to the chair frame.

Specifications

FeatureDetail
BrandIRONCK
Model NumberMRC-B01
ColorGrey
MaterialsAlloy Steel (Frame), PE Rattan, Olefin Fabric (Cushion)
Product Dimensions (L x W x H)46 inches x 30 inches x 31 inches (approx. 116.8 cm x 76.2 cm x 78.7 cm)
Cushion Size (L x W x T)51 inches x 30 inches x 5 inches (approx. 129.5 cm x 76.2 cm x 12.7 cm)
Item Weight23.04 lbs (approx. 10.45 kg)
Maximum Weight Capacity450 lbs (approx. 204 kg)
Special FeaturesErgonomic Design, Back Support, Water-resistant Cushion, Fade-resistant Cushion, 30° Rocking Motion, Silent Rubber Rockers
Assembly RequiredYes

Warranty Information

Specific warranty details are typically provided with your purchase documentation. Please refer to the warranty card or contact IRONCK customer support for information regarding your product's warranty period and coverage.

The warranty generally covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear.

Customer Support

For any questions, missing parts, or assistance with assembly or operation, please contact IRONCK customer support. Our U.S.-based customer support team is available to help.

Please have your model number (MRC-B01) and purchase information ready when contacting support.

Contact Information: Refer to your product packaging or the IRONCK official website for the most current contact details.

© 2024 IRONCK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.