Kircuit 5V USB-C Power Adapter for WOPET HA10DP Feeder

1. Introduction

This Kircuit AC adapter is designed to provide reliable power for your WOPET HA10DP WiFi 6L Cat Pet Food Feeder. It converts standard AC wall power into the necessary DC power, allowing you to operate your device or charge its internal battery. This adapter has been validated and tested to ensure compatibility and performance with the specified WOPET HA10DP model.

2. Safety Information

• Read all instructions carefully before using the product.
• Keep the adapter and cable away from water, moisture, and extreme temperatures.
• Do not attempt to disassemble, modify, or repair the adapter. Refer servicing to qualified personnel.
• Use only with compatible devices as specified. Using with incompatible devices may cause damage.
• Ensure the adapter is plugged into a properly grounded electrical outlet.
• Avoid placing heavy objects on the power cord or exposing it to sharp edges.

3. Package Contents

Verify that all items are present in the package:

• 1 x Kircuit 5V USB-C Power Adapter
• 1 x USB-C Cable (approximately 3 feet long)

4. Setup Instructions

1. Connect the USB-C Cable: Insert the USB-C end of the provided cable into the USB-C port on the Kircuit power adapter.
2. Connect to Device: Plug the other end of the USB-C cable into the power input port of your WOPET HA10DP WiFi 6L Cat Pet Food Feeder.
3. Plug into Wall Outlet: Insert the Kircuit power adapter into a standard electrical wall outlet. The adapter supports worldwide input voltage from 100-240VAC at 50/60Hz.

Image: The Kircuit 5V USB-C Power Adapter with its accompanying USB-C cable. The adapter is black with a standard two-prong plug, and the cable is also black, featuring a USB-C connector on one end and a standard USB-A connector on the other for the adapter connection.

5. Operating Instructions

Once properly connected as described in the Setup section, the Kircuit 5V USB-C Power Adapter will automatically begin supplying power to your WOPET HA10DP feeder. No further action is required for the adapter itself. Ensure your WOPET HA10DP feeder is powered on and configured according to its own instruction manual.

6. Maintenance

• Cleaning: Disconnect the adapter from the power outlet before cleaning. Use a dry, soft cloth to wipe the adapter and cable. Do not use liquid cleaners or aerosols.
• Storage: When not in use, store the adapter and cable in a cool, dry place, away from direct sunlight and extreme temperatures.
• Cable Care: Avoid bending, twisting, or crimping the cable excessively, as this can damage the internal wires. Do not pull the cable to disconnect it from the outlet; always grasp the adapter plug firmly.

7. Troubleshooting

• No Power to Device:
  • Ensure the power adapter is securely plugged into a functional wall outlet.
  • Verify that the USB-C cable is firmly connected to both the adapter and the WOPET HA10DP feeder.
  • Try plugging the adapter into a different wall outlet to rule out an issue with the original outlet.
  • Check the USB-C cable for any visible damage (frays, cuts, bends). If damaged, replace the cable.
• Intermittent Power:
  • Inspect all connections for looseness.
  • Ensure the cable is not being stressed or bent at sharp angles.

8. Specifications

9. Warranty and Support

This Kircuit power adapter is manufactured to high-quality standards, ensuring reliable performance. For any technical support, warranty inquiries, or assistance with your product, please contact the retailer from whom you purchased the item or refer to the contact information provided by the manufacturer.