Introduction
This manual provides essential information for the safe and effective use of your Energizer HARDCASE Professional Pivot Plus Swivel Head Flashlight. Please read these instructions carefully before operating the device and retain them for future reference.
The Energizer HARDCASE Professional Pivot Plus Flashlight is designed for durability and versatility, featuring a pivoting head, magnetic base, and two light modes for various tasks.
Package Contents
- Energizer HARDCASE Professional Pivot Plus Swivel Head Flashlight
- 2 x Energizer MAX AA Alkaline Batteries
Setup
Battery Installation
- Locate the battery compartment cap at the base of the flashlight.
- Unscrew the cap by turning it counter-clockwise.
- Insert two (2) AA alkaline batteries into the compartment, ensuring the positive (+) and negative (-) terminals align with the indicators inside the compartment.
- Replace the battery compartment cap and screw it clockwise until securely tightened.
Image: The base of the flashlight with the battery cap unscrewed, showing the compartment for AA batteries.
Operating Instructions
Power On/Off and Mode Selection
The flashlight features an extra-large trigger-style button for easy operation.
- Press the power button once to activate the flashlight in High mode (300 lumens).
- Press the power button a second time to switch to Low mode.
- Press the power button a third time to turn the flashlight off.
Image: Illustration of the flashlight operating in High and Low light modes.
Pivoting Head Function
The flashlight head can pivot up to 175 degrees, allowing you to direct light precisely where needed.
- Gently adjust the flashlight head to your desired angle. The head will hold its position once set.
Image: The flashlight head pivoting to illustrate its 175-degree range of motion.
Hands-Free Operation
The flashlight is equipped with a magnetic base and a built-in lanyard loop for hands-free use.
- Magnetic Base: Attach the magnetic base to any ferrous metal surface to secure the flashlight and illuminate your workspace.
- Lanyard Loop: Use the integrated loop to attach a lanyard (not included) for carrying or hanging the flashlight.
Image: The flashlight attached to a metal surface via its magnetic base, providing hands-free lighting.
Maintenance
Battery Replacement
Replace batteries when the light output diminishes or the flashlight ceases to function. Follow the battery installation steps outlined in the Setup section.
Cleaning
Wipe the flashlight with a clean, damp cloth as needed. Do not use abrasive cleaners or immerse the flashlight in water.
Durability and Water Resistance
The flashlight features a durable rubber body designed to withstand drops from up to 7 meters (2 stories). It has an IPX4 water-resistant rating, protecting it from splashing water from any direction.
Image: The flashlight with water droplets, demonstrating its IPX4 water resistance.
Troubleshooting
Light Not Turning On
- Check Batteries: Ensure batteries are inserted correctly with the correct polarity.
- Replace Batteries: If the batteries are old or depleted, replace them with fresh AA alkaline batteries.
- Secure Battery Cap: Ensure the battery compartment cap is fully tightened to ensure proper electrical contact.
Specifications
| Model Number | HCSW21E |
| Light Source | LED |
| Brightness (High Mode) | 300 Lumens |
| Beam Distance | Up to 30 meters |
| Power Source | 2 x AA Alkaline Batteries |
| Run Time (High Mode) | Up to 5 hours |
| Run Time (Low Mode) | Up to 30 hours |
| Drop Resistance | 7 meters (2 stories) |
| Water Resistance | IPX4 (Splash Resistant) |
| Product Dimensions | 2.57"D x 4.76"W x 9.45"H |
| Item Weight | 4.3 ounces |
| Material | Plastic with Rubber Finish |
Warranty
This product comes with a Limited Warranty. For specific details regarding warranty coverage and terms, please refer to the official Energizer website or contact customer support.
Support
For any questions, concerns, or technical assistance, please visit the official Energizer website: