ASHATA 350ML Portable Electric Kettle User Manual

1. Product Overview

The ASHATA 350ML Portable Electric Kettle is a versatile device designed for boiling, heating, maintaining constant temperature, and preserving heat. Its compact and portable design makes it suitable for travel and outdoor activities.

Image 1.1: The ASHATA Portable Electric Kettle, showcasing its digital temperature display and sleek design.

Key features include a 350ML capacity, fast boiling capability (approximately 10 minutes to 100°C), 12-hour insulation, and a built-in 27000mAh rechargeable battery for cordless operation.

2. Safety Instructions

• Read all instructions before use: Familiarize yourself with the operation and safety guidelines.
• Electrical Safety: Use only the provided charging cable and fast charger plug. Do not immerse the kettle base or electrical components in water.
• Hot Surfaces: The kettle body and lid will become hot during and after boiling. Use caution when handling.
• Water Level: Do not overfill or underfill the kettle. Ensure water is between the minimum and maximum fill lines.
• Dry Boiling Protection: The kettle is equipped with anti-dry burning protection. Do not attempt to operate without water.
• Children and Pets: Keep the kettle out of reach of children and pets.
• Maintenance: Refer to the maintenance section for cleaning instructions. Do not use abrasive cleaners.

3. Package Contents

Verify that all items are present in the package:

• 1 x Travel Electric Kettle
• 1 x Charging Cable
• 1 x User Manual (this document)
• 1 x Fast Charger Plug (US Plug)

4. Setup and Charging

4.1 Initial Charge

Before first use, fully charge the kettle's internal 27000mAh lithium-ion battery. Connect the provided charging cable to the kettle's charging port and the fast charger plug to a suitable power outlet. The display will indicate charging status.

Image 4.1: The kettle's charging port, illustrating various charging methods including USB, power bank, and car charging.

4.2 Filling the Kettle

Remove the lid and fill the kettle with water. Do not exceed the maximum fill line (350ML capacity). Ensure the lid is securely closed before operation.

Image 4.2: The compact and portable design of the kettle, suitable for travel.

5. Operating Instructions

5.1 Power On/Off

To power on or off the kettle, long press the power button for 2 seconds. The digital display will illuminate.

5.2 Temperature Selection and Boiling

Once powered on, tap the power button to cycle through available temperature settings (45°C - 100°C). The selected temperature will be displayed.

Image 5.1: The kettle's intelligent constant temperature control, set to 45°C, ideal for various beverages.

The kettle will automatically begin heating to the selected temperature. For boiling water to 100°C, it typically takes about 10 minutes.

Image 5.2: Visual representation of the rapid boiling process, achieving 100°C quickly.

5.3 Heat Preservation (12-Hour Insulation)

After reaching the desired temperature, the intelligent constant temperature system will maintain the water's warmth for up to 12 hours, provided the kettle remains powered on and undisturbed.

Image 5.3: Examples of suitable temperatures for different beverages and uses, such as 45°C for baby formula or 100°C for boiling.

5.4 Cordless Operation

Thanks to its 27000mAh battery, the kettle can boil water 2-3 times on a full charge without needing to be plugged into a power outlet, offering convenience for outdoor use.

Image 5.4: The kettle operating cordlessly in an outdoor setting, demonstrating its portability.

6. Maintenance

6.1 Cleaning the Interior

To clean the interior, fill the kettle with a mixture of water and white vinegar (1:1 ratio) or a descaling solution. Boil the mixture, then let it stand for 30 minutes before emptying and rinsing thoroughly with fresh water. Repeat if necessary.

6.2 Cleaning the Exterior

Wipe the exterior of the kettle with a soft, damp cloth. Do not use abrasive cleaners or immerse the kettle in water. Ensure the charging port is dry before charging.

6.3 Storage

When not in use, ensure the kettle is clean and dry. Store it in a cool, dry place away from direct sunlight.

7. Troubleshooting

• Kettle not turning on:
  • Ensure the battery is charged.
  • Long press the power button for 2 seconds.
• Water not heating:
  • Check if the kettle is powered on and a temperature is selected.
  • Ensure there is sufficient water in the kettle.
  • Verify the battery has enough charge.
• Kettle leaking:
  • Ensure the lid is securely closed.
  • Check for any visible damage to the kettle body or seals.
• Slow boiling:
  • Ensure the kettle is fully charged.
  • Descaling may be required if mineral deposits have built up.

8. Specifications

Image 8.1: Detailed dimensions of the ASHATA Portable Electric Kettle.

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official ASHATA website. Keep your purchase receipt as proof of purchase.