Baseus Inspire XH1 Adaptive Active Noise Cancelling Headphones User Manual

1. Introduction

This manual provides essential information for the proper use and maintenance of your Baseus Inspire XH1 Adaptive Active Noise Cancelling Headphones. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Image 1.1: Baseus Inspire XH1 Headphones

2. Package Contents

Verify that all items are present in the package:

• Baseus Inspire XH1 Active Noise Cancelling Headphones ×1
• Aux Cable ×1
• USB-C Cable ×1
• Carrying Case ×1

Image 2.1: Package Contents

3. Product Diagram and Controls

Familiarize yourself with the headphone's physical controls and ports.

Image 3.1: Headphone Controls Overview

Button Functions:

• ANC Button:
  • Press once: Toggle ANC Mode (ANC On / ANC Off / Transparency).
  • Press and hold for 2 seconds: Activate Quick Attention (one-press transparency and volume down).
• Multifunction Button:
  • Press once: Play or pause audio.
  • Press once: Answer or end calls.
  • Press twice: Toggle Dolby Audio off or on.
  • Press twice: Reject calls.
  • Press three times: Activate Low Latency mode.
• Volume Buttons (+/-):
  • Press once (+): Volume up.
  • Press once (-): Volume down.
  • Press and hold (+) for 2 seconds: Previous track.
  • Press and hold (-) for 2 seconds: Next track.

4. Setup

4.1 Initial Charging

Before first use, fully charge the headphones. Connect the supplied USB-C cable to the charging port on the headphones and to a compatible USB power source. The charging indicator will show the charging status.

4.2 Powering On/Off

• Power On: Press and hold the Multifunction Button until the indicator light illuminates.
• Power Off: Press and hold the Multifunction Button until the indicator light turns off.

4.3 Bluetooth Pairing

1. Ensure the headphones are powered off.
2. Press and hold the Multifunction Button for approximately 5 seconds until the indicator light flashes rapidly, indicating pairing mode.
3. On your device (smartphone, laptop, etc.), enable Bluetooth and search for available devices.
4. Select "Baseus Inspire XH1" from the list of devices.
5. Once connected, the indicator light will stop flashing and remain solid.

4.4 Baseus App Installation

For full functionality, including SoundFit hearing personalization, advanced EQ settings, and noise reduction modes, download and install the Baseus App (V2.8.9+) from your device's app store. Ensure your headphone firmware (V1.1.07+) is updated via the app for the best experience.

Image 4.1: Baseus App Interface

5. Operation

5.1 Active Noise Cancellation (ANC) Modes

The Baseus Inspire XH1 features Adaptive ANC. Press the ANC button to cycle through modes:

• ANC On: Reduces external noise by up to -48 dB. Ideal for noisy environments.
• Transparency Mode: Allows ambient sounds to pass through, keeping you aware of your surroundings.
• ANC Off: Standard audio playback without noise cancellation.

Image 5.1: Adaptive ANC in Action

5.2 Call Management

The headphones feature 5-Mic ENC and AI-powered noise reduction for clear calls.

• Answer/End Call: Press the Multifunction Button once.
• Reject Call: Press the Multifunction Button twice.

Image 5.2: Clear Call Functionality

5.3 Music Playback

Control your audio playback directly from the headphones:

• Play/Pause: Press the Multifunction Button once.
• Next Track: Press and hold the Volume Down (-) button for 2 seconds.
• Previous Track: Press and hold the Volume Up (+) button for 2 seconds.
• Volume Up/Down: Press the respective Volume button once.

5.4 Multipoint Connection

The headphones support simultaneous connection to two devices via Bluetooth 6.1. This allows for seamless switching between audio sources. Enable multipoint connection through the Baseus App.

5.5 Charging and Battery Life

The Inspire XH1 offers extended battery life:

• Up to 100 hours of playtime with ANC off.
• Up to 65 hours of playtime with ANC on.
• A 10-minute fast charge provides approximately 12 hours of playtime.
• Full charge time is approximately 1.5 hours.

Image 5.3: Battery Performance

6. Sound Features

The Baseus Inspire XH1 headphones are engineered for a premium audio experience.

• Sound by Bose: Delivers a signature premium audio experience.
• Dolby Spatial Audio: Provides immersive 360° sound. Can be toggled via the Multifunction Button or Baseus App.
• Hi-Res Audio & LDAC: Certified for high-resolution audio, with LDAC support for 3 times the audio detail of standard Bluetooth.
• SuperBass 3.0 & SuperBalance 3.0: Optimized acoustic chambers and angled drivers provide deep bass and balanced sound.
• SoundFit Hearing Personalization: Available via the Baseus App, this feature customizes the sound profile based on your unique hearing.

Image 6.1: Sound by Bose Integration

Image 6.2: Internal Audio Components

7. Comfort and Design

The Inspire XH1 headphones are designed for extended wear.

• Velvet-Like CloudComfort: Ergonomic over-ear design with protein leather and resilient memory foam padding for comfort.
• Travel-Friendly Portability: Foldable design and included carrying case for easy transport.

Image 7.1: CloudComfort Earcup

Image 7.2: Travel-Friendly Carrying Case

8. Maintenance

To ensure the longevity and optimal performance of your headphones, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the exterior surfaces of the headphones. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the headphones in their protective carrying case to prevent damage from dust, scratches, and impacts.
• Avoid Moisture: Do not expose the headphones to water or excessive moisture. If they get wet, dry them thoroughly before use or storage.
• Temperature: Avoid exposing the headphones to extreme temperatures (hot or cold) as this can affect battery life and internal components.
• Cable Care: Handle the Aux and USB-C cables gently. Avoid sharp bends or excessive pulling to prevent damage.

9. Troubleshooting

If you encounter issues with your Baseus Inspire XH1 headphones, refer to the following common solutions:

If the problem persists, please contact Baseus customer support for further assistance.

10. Specifications

11. Warranty and Support

For warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official Baseus website. Keep your purchase receipt as proof of purchase for warranty claims.

Manufacturer: Baseus

Official Website: Baseus Official Store on Amazon