1. Introduction
Thank you for choosing the Segway-Ninebot Water Bottle Holder. This accessory is designed to provide a convenient and secure way to carry your water bottle while riding your electric scooter. It is lightweight, durable, and compatible with various Segway-Ninebot electric scooter models.
2. Product Overview
Figure 1: The Segway-Ninebot Water Bottle Holder. This image shows the lightweight bottle holder, designed to securely attach to your electric scooter, providing easy access to your hydration during rides.
Included Components:
- 1x Segway-Ninebot Water Bottle Holder
- Mounting Screws
- Washers
- Installation Wrench
3. Setup and Installation
The water bottle holder is designed for quick and easy installation. Please follow these steps:
- Identify Mounting Location: Locate the universal mounting holes on your Segway-Ninebot electric scooter. The standard spacing is 65 mm, designed for two M5 screws.
- Position the Holder: Align the water bottle holder with the mounting holes on your scooter.
- Secure with Screws: Insert the provided mounting screws through the holder and into the scooter's mounting holes. Place washers under the screw heads if necessary.
- Tighten Fasteners: Use the included wrench to securely tighten the screws. Ensure the holder is firmly attached and does not wobble. Do not overtighten.
Installation typically takes less than one minute.
4. Operating Instructions
Once installed, using the water bottle holder is straightforward:
- Bottle Compatibility: The holder is designed to accommodate standard water bottles with a diameter between 60 mm and 85 mm.
- Inserting a Bottle: Gently slide your water bottle into the holder. The flexible design will secure the bottle in place.
- Removing a Bottle: Pull the water bottle upwards to remove it from the holder.
Ensure the bottle is securely seated before riding to prevent it from falling out during movement.
5. Maintenance
The Segway-Ninebot Water Bottle Holder is constructed from durable polyamide with 15% fiberglass, designed to withstand various weather conditions. Minimal maintenance is required.
- Cleaning: Wipe the holder with a damp cloth to remove dirt or dust. Avoid using harsh chemicals that may damage the material.
- Inspection: Periodically check the mounting screws to ensure they remain tight. Retighten if any looseness is detected.
- Damage: If the holder appears cracked or damaged, replace it to ensure secure bottle retention.
6. Troubleshooting
- Bottle Does Not Fit:
- Ensure your bottle's diameter is within the 60 mm to 85 mm range. Bottles outside this range may not fit securely or at all.
- Holder Feels Loose After Installation:
- Check that the mounting screws are fully tightened using the provided wrench.
- Verify that the holder is correctly aligned with the scooter's mounting points.
- Bottle Falls Out During Ride:
- Confirm that the bottle diameter is within the specified range (60-85 mm).
- Ensure the bottle is fully inserted and seated firmly in the holder before starting your ride.
- Inspect the holder for any damage or cracks that might compromise its grip.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 3802530 (PH1401) |
| Net Weight | Approx. 31 g (0.07 lbs) |
| Dimensions (L x W x H) | 11.8 x 16.7 x 8.3 cm (4.7 x 6.6 x 3.3 inches) |
| Material | Polyamide (PA) + 15% Fiberglass (GF) |
| Compatible Bottle Diameter | 60 mm to 85 mm |
| Mounting Hole Spacing | 65 mm (Universal) |
| Compatible Scooter Models | Segway E3, E3 Pro, F3 Pro, F3, MAX G3, ZT3 Pro |
| Color | Black |
8. Warranty and Support
For detailed warranty information regarding your Segway-Ninebot Water Bottle Holder, please refer to the warranty card included with your purchase or visit the official Segway-Ninebot website. Warranty terms may vary by region and retailer.
If you encounter any issues or require technical assistance, please contact Segway-Ninebot customer support through their official website or the contact information provided in your product documentation.