Akko 5075B Custom Gaming Keyboard Kit User Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Akko 5075B Custom Gaming Keyboard Kit. The Akko 5075B is a 75% layout barebones mechanical keyboard kit featuring VIA programmability, multi-mode connectivity (wired, 2.4GHz, Bluetooth 5.0), a gasket mount design for enhanced typing feel, hot-swappable 5-pin sockets, and RGB backlighting. This kit is designed for enthusiasts who wish to customize their keyboard with their preferred switches and keycaps.

Image: Top-down view of the Akko 5075B barebones keyboard kit, showcasing its 75% layout and empty switch sockets.

Setup

1. Installing Switches

The Akko 5075B features hot-swappable 5-pin sockets, allowing for easy installation and removal of mechanical switches without soldering.

1. Align the pins of your desired mechanical switch with the holes in the PCB (Printed Circuit Board). Ensure the switch is oriented correctly.
2. Gently push the switch straight down until it clicks into place. Do not force the switch, as this may bend the pins.
3. Repeat for all desired switch positions.

Image: A mechanical switch being inserted into a hot-swappable socket on the Akko 5075B keyboard using a switch puller.

2. Installing Keycaps

Once switches are installed, press your keycaps firmly onto the switch stems until they are seated securely.

3. Initial Connection

Before first use, it is recommended to connect the keyboard via the wired USB-C connection to ensure proper power and initial recognition by your computer.

• Connect the USB-C cable to the port on the keyboard.
• Connect the other end of the cable to an available USB port on your computer.
• The keyboard should be recognized automatically by your operating system.

Image: Close-up view of the USB-C port located on the Akko 5075B keyboard for wired connectivity and charging.

Operating Instructions

Connectivity Modes

The Akko 5075B supports three connectivity modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth 5.0. A switch on the keyboard allows you to select the desired mode.

Image: The Akko 5075B keyboard positioned on a desk, illustrating its multi-device connectivity options including wired USB-C, 2.4GHz wireless, and Bluetooth.

• Wired Mode: Connect the USB-C cable to the keyboard and your computer. The keyboard will automatically operate in wired mode.
• 2.4GHz Wireless Mode:
  1. Locate the 2.4GHz USB receiver (often stored in a compartment on the keyboard).
  2. Plug the receiver into an available USB port on your computer.
  3. Switch the keyboard to 2.4GHz mode. The keyboard should connect automatically.
  

  Image: Close-up view of the integrated storage slot for the 2.4GHz USB receiver on the Akko 5075B keyboard.

• Bluetooth 5.0 Mode:
  1. Switch the keyboard to Bluetooth mode.
  2. On your device (computer, tablet, phone), enable Bluetooth and search for new devices.
  3. Select "Akko 5075B" (or similar name) from the list of available devices to pair.
  4. The keyboard can store multiple Bluetooth profiles for quick switching between devices. Refer to the full manual for specific key combinations for profile switching.

Rotary Encoder (Volume Control)

The rotary encoder knob located on the top right of the keyboard primarily functions as a volume control. Rotate clockwise to increase volume, counter-clockwise to decrease volume. Pressing the knob typically mutes/unmutes audio.

Image: A detailed view of the rotary encoder knob on the Akko 5075B keyboard, highlighted with a blue glow, indicating its function as a volume control.

VIA Software Customization

The Akko 5075B is VIA programmable, allowing for extensive customization of key assignments, macros, and lighting effects without firmware flashing. Download the VIA software from the official Akko website.

• Connect the keyboard via USB-C to your computer.
• Open the VIA software. The software should automatically detect your keyboard.
• Use the intuitive interface to remap keys, create macros, and adjust RGB lighting settings. Changes are applied in real-time.

Image: A screenshot of the VIA configuration software interface, showing options for key remapping, macro creation, and lighting adjustments for the keyboard.

RGB Backlighting

The keyboard features customizable RGB backlighting. Lighting effects and brightness can be adjusted via the VIA software or through onboard key combinations (refer to the full manual for specific shortcuts).

Image: The Akko 5075B keyboard displaying its vibrant RGB backlighting, with individual key illumination visible.

Maintenance

Cleaning the Keyboard

• Disconnect the keyboard from all power sources before cleaning.
• Use a keycap puller to remove keycaps for thorough cleaning.
• Use compressed air to remove dust and debris from between the switches.
• Wipe the keycaps and keyboard frame with a soft, slightly damp, lint-free cloth. Avoid excessive moisture.
• Do not use harsh chemicals, abrasive cleaners, or solvents.

Switch and Keycap Care

When hot-swapping switches, ensure they are inserted straight to avoid bending pins. Store spare switches and keycaps in a clean, dry environment.

Troubleshooting

• Keyboard not responding:
  • Ensure the USB-C cable is securely connected or the 2.4GHz receiver is plugged in, or Bluetooth is paired.
  • Check the mode switch on the keyboard to ensure it's set to the correct connectivity mode.
  • Recharge the keyboard if using wireless modes, as low battery can cause connectivity issues.
  • Try connecting to a different USB port or computer to rule out port or system issues.
• Keys not registering:
  • Ensure the switch is fully seated in its socket. Gently press down on the keycap.
  • If a specific key is not working, try hot-swapping the switch with a known working switch from another key to diagnose if the issue is with the switch or the socket.
  • Check for bent pins on the switch if it's not inserting correctly.
• RGB lighting not working/incorrect:
  • Ensure the keyboard is powered on.
  • Check VIA software settings for lighting configurations.
  • Refer to the full manual for onboard RGB control shortcuts to reset or change effects.
• Bluetooth pairing issues:
  • Ensure the keyboard is in Bluetooth pairing mode.
  • Remove "Akko 5075B" from your device's Bluetooth list and attempt to re-pair.
  • Ensure your device's Bluetooth is enabled and drivers are up to date.

Specifications

Warranty and Support

Akko products are designed and manufactured to high quality standards. For information regarding warranty coverage, technical support, or service, please refer to the official Akko website or contact Akko customer service directly. Please retain your proof of purchase for warranty claims.

Official Akko Website: www.akkogear.com

For further assistance, please contact the seller or manufacturer through the platform where the product was purchased.