Garvee 70-inch Fireplace TV Stand with 36-inch Electric Fireplace and LED Lights Instruction Manual

1. Introduction and Overview

Thank you for purchasing the Garvee 70-inch Fireplace TV Stand. This modern entertainment center is designed to accommodate TVs up to 80 inches and features a built-in 36-inch electric fireplace with LED lights. This manual provides essential information for safe assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your product.

Figure 1: Fully assembled Garvee 70-inch Fireplace TV Stand.

2. Safety Information

Please read all safety warnings and instructions carefully before assembly and operation to prevent injury or damage. Keep this manual for future reference.

General Safety

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly.
• Keep children and pets away from the assembly area.
• This product is made of engineered wood. Avoid exposure to excessive moisture.

Electric Fireplace Safety

• CAUTION: HOT SURFACE. DO NOT COVER. The fireplace heater outlet becomes hot during operation.
• Ensure the fireplace is properly installed and secured before use.
• This electric fireplace features a Safety Cut-Off and Overheat Protection system. If the heater overheats, it will automatically shut off. Unplug the unit and allow it to cool for 10-15 minutes before restarting.
• The unit is ETL Certified, ensuring it meets recognized safety standards.
• Do not operate the fireplace with a damaged cord or plug, or if the heater malfunctions.
• Keep combustible materials at least 3 feet (0.9 meters) away from the front of the heater.

Figure 2: Electric Fireplace Safety Features.

3. Package Contents

Your Garvee Fireplace TV Stand is shipped in two boxes. Please verify that all components and hardware are present before beginning assembly. Refer to the included illustrated instructions for a detailed list of parts.

Figure 3: Packaging and overall dimensions of the TV stand.

4. Setup and Assembly Instructions

Assembly of the Garvee Fireplace TV Stand is designed to be straightforward with clear, illustrated instructions and labeled parts. It can typically be completed in under an hour. Follow the step-by-step guide provided in your package. The electric fireplace insert is integrated during the assembly process.

Key Assembly Steps:

1. Unpack all components and lay them out on a soft, clean surface. Verify all parts against the parts list in your manual.
2. Begin by assembling the main frame of the TV stand according to the numbered steps in the manual.
3. Integrate the 36-inch electric fireplace insert into the designated central compartment as instructed. Ensure it is securely fastened.
4. Attach the two-tier shelving units and the two storage cabinets on either side of the fireplace.
5. Install the LED lighting kit along the top of the open shelves as per the instructions.
6. Secure the top panel of the TV stand.
7. Attach the golden legs to the base of the TV stand.

5. Operating Instructions

Your Garvee Fireplace TV Stand features an electric fireplace and LED lighting, both controllable via remote or integrated buttons.

Electric Fireplace Operation:

• The 36-inch wide electric fireplace offers 8 flame colors and 3 brightness levels.
• It provides 1400W power with up to 4800 BTU output, capable of heating areas up to 400 sq. ft.
• The fireplace can operate with or without heat, allowing for ambiance year-round.
• Adjust the temperature and set a timer for automatic shut-off (up to 8 hours) using the included remote control or the control panel on the unit.

LED Lighting Operation:

• The included LED lighting kit offers 7 base colors and 56 dynamic combinations.
• Control the LED lights using their dedicated remote control to personalize the ambiance.

Figure 4: Fireplace Flame and Crystal Features.

Figure 5: Vivid Flames with Multiple Color Options.

Figure 6: Powerful Heating Features.

Figure 7: Fireplace Control Panel and Remote.

6. Maintenance

To ensure the longevity and optimal performance of your TV stand and electric fireplace, follow these maintenance guidelines:

• Cleaning the TV Stand: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the high-gloss finish.
• Cleaning the Fireplace: Ensure the fireplace is turned off and unplugged before cleaning. Use a soft, dry cloth to wipe the glass and exterior surfaces. Do not spray liquids directly onto the unit.
• Dusting: Regularly dust the shelves and cabinet interiors to prevent buildup.
• Cable Management: Periodically check and organize cables to prevent tangles and ensure proper ventilation.

7. Troubleshooting

If you encounter any issues with your Garvee Fireplace TV Stand, refer to the following common troubleshooting tips:

• Fireplace not turning on: Ensure the unit is properly plugged into a working electrical outlet. Check the power switch on the unit and the remote control batteries. Verify that the safety cut-off has not been activated due to overheating; if so, unplug and allow to cool.
• No heat output: Confirm the heater function is activated. Check the temperature setting and ensure it is above the current room temperature.
• LED lights not working: Check the power connection for the LED strip and ensure the remote control batteries are functional.
• Loose components: Periodically check all screws and fasteners to ensure they are tight. Retighten as necessary, but do not overtighten.

If problems persist, please contact Garvee customer support for assistance.

8. Specifications

9. Warranty and Support

Garvee is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, our dedicated support team is available to assist you with any questions or concerns you may have regarding your Fireplace TV Stand.

For assistance, please contact our customer support team. We aim to respond to all inquiries within 24 hours.